• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.23-29
• /
• 2007

Fracture behavior of brittle solids such as rocks, ceramics and concrete is closely related to microcracking. A meso-scale analysis method using the natural element method is proposed for the analysis of material damage of brittle microcracking solids. The microcracking is assumed to occur along Voronoi edges in the Voronoi diagram generated using the nodal points as the generators. The mechanical effect of microcracks is considered by controlling the material constants in the neighborhood of the microcracks. The proposed meso analysis method is applied to the simulation of the microcracking behaviors of brittle solids subjected to uniaxial and biaxial macrostress. The obtained results are in good agreement with the results by computational damage mechanics model. The validity of the proposed method has been demonstrated by these numerical examples.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.5
• /
• pp.250-256
• /
• 1995

The ddh gene encoding meso-diaminopimelate (meso-DAP)-dehydrogenase (DDH) in Brevibacterium lactofermentum was isolated by complementation of the Escherichia coli dapD mutation. It was supposed from subcloning experiments and complementation tests that the evidence for DDH activity appeared in about 2.5 kb Xhol fragmented genome. The 2.5 kb Xhol fragment containing the ddh gene was sequenced, and an open reading frame of 960 bp encoding a polypeptide comprising 320 amino acids was found. Computer analysis indicated that the deduced amino acid of the B. lactofermentum ddh gene showed a high homology with that of the Corynebacterium glutamicum ddh gene.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2560-2564
• /
• 2011

Mesoporous silicon dioxide (meso-$SiO_2$) was prepared using cetyltrimethylammonium bromide as the structure-directing reagent and tetraethyl orthosicate as the silicon source. The influence of pH value on the adsorption behavior of bisphenol A (BPA) was investigated. The adsorption capacity of BPA onto meso-$SiO_2$ increases slightly with pH value from 2 to 6, and then gradually decreases as further improving pH value. The effect of temperature was also studied, and the adsorption capacity of BPA gradually declines with increasing temperature. The adsorption kinetics and thermodynamics of BPA were examined. It is found that the adsorption of BPA onto meso-$SiO_2$ is in good agreement with Langmuir adsorption model. The rate constant of adsorption is $5.17{\times}10^{-3}g\;mg^{-1}\;min^{-1}$, and the maximum adsorption capacity is as high as 353.4 $mg\;g^{-1}$ at 20 $^{\circ}C$.

• Computers and Concrete
• /
• v.19 no.4
• /
• pp.375-385
• /
• 2017

In the present paper experimental and numerical analysis of hook-ended steel fiber reinforced concrete is carried out. The experimental tests are performed on notched beams loaded in 3-point bending using fiber volume fractions up to 1.5%. The numerical analysis of fiber reinforced concrete beams is performed at meso scale. The concrete is discretized with 3D solid finite elements and microplane model is used as a constitutive law. The fibers are modelled by randomly generated 1D truss finite elements, which are connected with concrete matrix by discrete bond-slip relationship. It is demonstrated that the presented approach, which is based on the modelling of concrete matrix using microplane model, able to realistically replicate experimental results. In all investigated cases failure is due to the pull-out of fibers. It is shown that with increase of volume content of fibers the effective bond strength and slip capacity of fibers decreases.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.2
• /
• pp.249-255
• /
• 2011

It is complicate problem to optimize removing natural organic matter (NOM) by activated carbon in drinking water treatment because the activated carbon has heterogeneous surface area and pore structure. Seven different coals based activated carbons which have different pore structures were used in the study. Sand filtered effluents which normally used as GAC adsorber influent were used. The molecular weight distribution showed that most of the NOM was bigger than 10,000Da. In this study, systematical approaches such as characteristics of surface area and pore volume were evaluated on NOM adsorption. Especially, the adsorption capacities for NOM were evaluated by effect of micro-pores and meso-pores in surface area and pore structure. The results show that the higher ratio of meso-pore compare to the micro-pore has not only the better adsorption capacities for NOM but also the higher strongly-adsorbable fraction. Therefore, the overall adsorption capacity is increased with higher meso-pore ratio with existing of reasonable micro-pore surface area and volume.

• Structural Engineering and Mechanics
• /
• v.43 no.5
• /
• pp.657-678
• /
• 2012

The mismatch of ply orientations in composite laminates can cause high interlaminar stress concentrations near the free edges. Evaluation of these interlaminar stresses and their role in the progressive damage analysis of laminates is desirable. Recently, the authors developed a new method to relate the physically based micromechanics approach with the meso-scale CDM considering matrix cracking and induced delamination. In this paper, the developed method is applied for the analysis of edge effects in various angle-ply laminates such as $[10/-10]_{2s}$, $[30/-30]_{2s}$ and $[45/-45]_{2s}$ and comparing the results with available traditional CDM and experimental results. It is shown that the obtained stress-strain behaviors of laminates are in good agreement with the available experimental results and even in better agreement than the traditional CDM results. Variations of the stresses and stiffness components through the laminate thickness and near the free edges are also computed and compared with the available CDM results.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1715-1718
• /
• 2009

A series of sitting-atop (SAT) complexes, [(ZrO)$H_2t(X)pp(NO_3)_2$], have been prepared via the reactions of free base meso-tetraarylporphyrins, $H_2$t(X)pp, with zirconyl nitrate hydrate, ZrO(N$O_3)_2{\cdot}xH_2$O. The products have been characterized by a variety of methods including $^1H\;NMR,\;^{13}C$ NMR, IR and UV-Vis spectroscopies, elemental analysis and conductance measurements. The data indicate that the meso-tetraarylporphyrins coordinate with two pyrrolenine nitrogen atoms to the zirconyl cation located above the distorted porphyrin plane and two protons remain on the pyrrole nitrogens. Such half sandwich-type sitting-atop complexes may be considered as models for the initial steps of the metallation of the macrocycles.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.377-382
• /
• 2005

This paper describes the design of micro machine tools system for mechanical machining of micro/meso scale mechanical parts. The micro machining systems such as $\mu-Late$, $\mu-milling/drilling$ machine and $\mu-grinding$ machine are the basic elements constructing $\mu-factory$ which gains more attention recently because of increasing needs of mico and nano-parts in various industrial and medical area. A miniaturized 3-axis milling machine with VCM stage and air spindle and palm-top size micro-late are designed, and air bearing stage and stepwise linear motion system with PZT are studied for motion system. The micro cutting characteristics are investigated experimentally, and reconfigurable machine structures are also considered.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.1
• /
• pp.59-64
• /
• 1992

The contrasting behaviour of meso-and d,l-$D_3$-trishomocubylidene-$D_3$-trishomocubane (1 and 2) in the electrophilic addition reaction, the former giving rearranged spiro compound (1a and 1b) and the latter giving 1,2-adduct (2a and 2b), has been explained as arising from the secondary steric effects based on computational evidence. As the degree of out-of-plane deformation of the olefinic carbon atoms increases with reaction progress, the resulting internal congestion in the region behind the double bond becomes unbearably large in meso-1. The absence of symmetry plane across the double bond of d,l-2 helps for the closing fragments to adjust themselves.

• Journal of Chest Surgery
• /
• v.56 no.2
• /
• pp.140-142
• /
• 2023

The azygos vein sometimes merges abnormally across the right upper lobe of the lung and it hangs at the lower edge of a membranous septum, called the meso-azygos. The septum invaginates the lobe and makes a fissure. The smaller medial part of the right upper lobe is called an azygos lobe. A 16-year-old male patient was diagnosed with right-sided pneumothorax, and a closed thoracostomy was done in the emergency room. During elective wedge resection including the bulla, the meso-azygos, abnormal azygos vein, and azygos lobe were detected. We reviewed the computed tomography images and found that the azygos lobe had re-expanded laterally, not medially, to the meso-azygos after the closed thoracostomy in the emergency room. The patient had been diagnosed with left-sided pneumothorax a year ago, and no one noticed the azygos lobe at that time. We report the intraoperative findings and comparative images of a migratory azygos lobe.