• Nuclear Engineering and Technology
• /
• v.52 no.7
• /
• pp.1347-1354
• /
• 2020

To improve the efficiency of MC criticality calculation, an acceleration method of fission source convergence which gives an improved initial fission source is proposed. In this method, the MC global homogenization is carried out to obtain the macroscopic cross section of each material mesh, and then the nonlinear iterative solution of the SP3 equations is used to determine the fission source distribution. The calculated fission source is very close to the real fission source, which describes its space and energy distribution. This method is an automatic computation process and is tested by the C5G7 benchmark, the results show that this acceleration method is helpful to reduce the inactive cycles and overall running time.

• Nuclear Engineering and Technology
• /
• v.41 no.3
• /
• pp.295-306
• /
• 2009

The subchannel grade void distributions in the NUPEC (Nuclear Power Engineering Corporation) BFBT (BWR Full-Size Fine-Mesh Bundle Tests) facility were evaluated with the subchannel analysis code MATRA and the system code MARS. Fifteen test series from five different test bundles were selected for an analysis of the steady-state subchannel void distributions. Two transient cases, a turbine trip without a bypass as a typical power transient and a re-circulation pump trip as a flow transient, were also chosen for this analysis. It was found that the steady-state void distributions calculated by both the MATRA and MARS codes coincided well with the measured data in the range of thermodynamic qualities from 5% to 25%. The results of the transient calculations were also similar and were highly feasible. However, the computational aspects of the two codes were clearly different.

• Ocean and Polar Research
• /
• v.40 no.1
• /
• pp.23-35
• /
• 2018

A small cyclopoid copepod M. subtilis (Giesbrecht, 1893 ["1892"]) belonging to the genus Monothula $B{\ddot{o}}ttger-Schnack$ and Huys, 2001 was collected by using $60{\mu}m$ mesh net and firstly recorded in the epipelagic layer of the equatorial Pacific Ocean. We redescribed its morphological characteristics for both female and male, comparing with those of previous studies. Specimens of M. subtilis from the equatorial Pacific Ocean differ from those previously reported by others in terms of the length of the seta G on antenna, being much shorter than setae E and F; in the distal spine on the swimming leg 4, being longer than the length of the third segment on P4. The outer spine of the P3 enp-3 in male is slightly over the tip of conical process. The spine lengths of the distal endopods of P2-P4 for both sexes showed variations among individuals, and the proportions of spine lengths in female are higher than those in male.

• Fisheries and Aquatic Sciences
• /
• v.8 no.3
• /
• pp.177-181
• /
• 2005

Fishing selectivity is determined by the level of voluntary escaping behavior in accordance with decision-making based on the relationship between fish size and mesh size. This study examined movement during the swimming behavior of black porgy in a trawl's towing cod-end and analyzed the movement components such as swimming speed, angular velocity of turning, and distance to the net over time. Most of the observed fish exhibited an optomotor response, maintaining position and swimming speed without changing direction. Others exhibited erratic or 'panic' behavior with sudden changes in swimming speed and direction. The latter behavior involved very irregular and aperiodic variations in swimming speed and angular velocity, termed 'chaotic behavior.' Thus, the results of this study can be applied to a chaotic behavior model as a time series of swimming movements in the towing cod-end for the fishing selectivity.

• Nuclear Engineering and Technology
• /
• v.51 no.5
• /
• pp.1436-1443
• /
• 2019

A fast gamma-ray dose rate assessment method for complex geometries based on stylized model reconstruction and point-kernel method is proposed in this paper. The complex three-dimensional (3D) geometries are imported as a 3DS format file from 3dsMax software with material and radiometric attributes. Based on 3D stylized model reconstruction of solid mesh, the 3D-geometrical solids are automatically converted into stylized models. In point-kernel calculation, the stylized source models are divided into point kernels and the mean free paths (mfp) are calculated by the intersections between shield stylized models and tracing ray. Compared with MCNP, the proposed method can implement complex 3D geometries visually, and the dose rate calculation is accurate and fast.

• Ocean and Polar Research
• /
• v.42 no.4
• /
• pp.283-292
• /
• 2020

Oncaea prendeli Shmeleva, 1966 is redescribed here based on a specimen collected using a fine-mesh net in the epipelagic layer in the south sea of Jeju Island, Korea. The Korean specimen is generally similar to Mediterranean specimens in terms of morphological characteristics, but it shows a few minor differences in a slightly larger length-to-width ratio for the distal endopod segment of the antenna, a relatively shorter caudal seta IV, and additional ornamentation on the maxillule and maxilla. This species is distinguishable from the most similar congeneric species, O. tregoubovi Shmeleva, 1968, and three species of the genus Spinoncaea Böttger-Schnack, 2003 by the distal and lateral armature of the antenna, ornamentation on the female maxilliped, spine number on the endopod of leg 2, and proportional length of setae on the caudal ramus. Moreover, spine lengths on the exopods of legs 2-4 are proposed as new morphological characters for the identification of congeners. This is the first record of O. prendeli in Korean waters.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.631-640
• /
• 2022

Labidocera pavo Giesbrecht, 1889 and L. sinilobata Shen and Lee, 1963, belonging to the detruncata group in the genus Labidocera were collected from the southwestern coastal waters of Korea, using a Norpac net (0.2 mm mesh size). Labidocera sinilobata, known to be endemic species in estuary of Chinese rivers, is the first record in Korean waters. In Chinese waters, this species has only been briefly documented and illustrated. In the study, their morphological characteristics were fully redescribed with careful examination of the fine epidermal structure using a SEM (Scanning Electron Microscope) in addition to their illustrations and compared with species of the detruncata species-group.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1210-1217
• /
• 2023

The assessment of radiation fields in the lithium loop pipes and dump tank during the operation were performed for International Fusion Materials Irradiation Facility - DEMO-Oriented NEutron Source (IFMIF-DONES) in order to obtain the radiation dose-rate maps in the component surroundings. Variance reduction techniques such as weight window mesh (produced with the ADVANTG code) were applied to bring the statistical uncertainty down to a reasonable level. The biological dose was given in the study, and potential shielding optimization is suggested and more thoroughly evaluated. The MCNP Monte Carlo was used to simulate a gamma particle transport for radiation shielding purposes for the current Li Systems' design. In addition, the shielding efficiency was identified for the Impurity Control System components and the dump tank. The analysis reported in this paper takes into account the radiation decay source from and activated corrosion products (ACPs), which is created by d-Li interaction. As a consequence, the radiation (resulting from ACPs and Be-7) shielding calculations have been carried out for safety considerations.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.2
• /
• pp.69-77
• /
• 2006

The aim of this study was to develope a fishing technology for fisheries management for improving the survival rate of young fishes escaped from trawl net. Sea experiments were carried out to investigate the survival rate of the fishes in off Geomun island and Korean southern sea. Cover-net fish cage was designed and manufactured to collect fishes escaped from COD(codend) and TED(trawl escapement device). Fish cage was installed in a shallow site where scuba diver can observe the surviving fishes after separating the cage from trawl net. Most of fishes except horse mackerel(Trachurus japonicus) and mackerel(Scomber japonicus) could escaped through TED(bar space 35mm) easier than COD(mesh size 54mm). Especially, escapement rate of redlip croaker(Pseudosciaena polyactis) escaped from TED was the highest as 73.9%. Survival rate of horse mackerel(Trachurus japonicus) escaped from TED was 85.5% at the point of 96 hours over, while the survival rate for COD showed a rapid decrease according to the time elapse as 85.0% at the point of 24 hours, 76.4% for 48 hours, 62.7% for 72 hours and 56.1% for 96 hours. Over 90% of red seabream(Pagrus major) and rock bream(Oplegnathus fasciatus) escaped from TED were survived 96 hours over and the survival rate of those fishes were excellent compared with the other fish species. All korean pomfret(Pampus echinogaster) escaped from both COD and TED were died within 48 hours. Most of redlip croaker(Pseudosciaena polyactis) were also died within 12 hours because of the weak physiological characteristics by water pressure change. Survival rate of fishes like as horse mackerel(Trachurus japonicus) having hard skin was high while it was low for the fishes like as squid(Todarodes pacificus) and hair-tail(Trichiurus lepturus) having soft skin. We could know that there were big differences in the survival rate offish species escaped from trawl net.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.4
• /
• pp.404-418
• /
• 2013

In this study, we conducted field surveys to investigate and analyze species and length composition of catch from gape net with wings being set in two areas - Masari, Supomri - located in southern part of Jin-do for understanding fishing characteristics of gape net with wings fishery from March to September of 2011. And with those results, we attempted to propose fishery management strategy to harvest fisheries resources continuously. Catch obtained from field surveys comprised total 78 species, which accounted for 53 species of fish, 20 species of crustacean, 4 species of cephalopod and one of polychaete. As to species composition in weight, it showed that there was 88.5% for pisces, 9.0% for cephalopoda and 2.5% for crustacea. As to catch specifics by area, there was 36 species (596,891 individual, 456,551g) of pisces, 17 species (35,815 individual, 12,909g) of crustacea and 3 species (2,876 individual, 3,004g) of cephalopoda in Masari area. In Supumri area, there was 41 species (396,898 individual, 281,457g) of pisces, 15 species (16,113 individual, 7,772g) of crustacea and 4 species (6,792 individual, 72,329g) of cephalopoda and one polychaeta (36 individual, 11g). Catch of anchovy by month recorded on high level on June, July, September in both areas. When considering size composition by month, it was found that new populations recruit to these fishing grounds on June and September. Most of bycatch species including hairtail (Trichiurus lepturus), dotted gizzard shad (Konosirus punctatus), conger eel (Leptocephalous), Pacific sandlance (Ammodytes personatus), horse mackerel (Trachurus japonicus) were juvenile, and grass puffer (Takifugu niphobles), Kammal thryssa (Thryssa kammalensis), Japanese sardinella (Sardinella zunasi) were also small in size. As a result, it is considered that gape net with wings fishery which is likely to catch juvenile needs to be set fishing prohibit period for conserving above stocks during the period excluding main fishing periods of anchovy or fisheries management such as expanding mesh size for preventing juvenile catch.