• 분석과학
• /
• 제12권5호
• /
• pp.370-374
• /
• 1999

추출 크로마토그래피를 이용하여 고순도 테르븀의 선택적 분리를 시도하였다. 고정상으로 2-ethylhexyl-2-ethylhexyl phosphonic acid(HEH[EHP]) 추출수지(-100~+150 mesh), 컬럼은 ${\Phi}20{\times}530mm$를 사용하고 온도는 $50^{\circ}C$로 유지하고, 흡착 유속은 $0.2mL/cm^2{\cdot}min$, 용출유속은 $1.0mL/cm^2{\cdot}min$, 컬럼의 높이와 직경의 비는 1:15로 하였다. 용리액의 산도, 시료의 부하량 및 시료의 조성을 변화시켜 테르븀의 분리의 최적조건을 설정하였다. 그 결과, 산도는 0.6 N HCl, 부하량은 약 5%, 시료의 조성은 $Gd_2O_3(20%)+Tb_4O_7(60%)+Dy_2O_3(20%)$이었다. 그리고, ICP-AES로 테르븀의 분리수율을 구한 결과 99.99% 이었고 순도는 99.98%이었다.

• 환경생물
• /
• 제21권1호
• /
• pp.31-35
• /
• 2003

유자의 착즙방법별 품질특성과 관능검사특성을 알아보기 위하여 원심분리식과 압착식 및 효소처리하여 압착한 방법으로 나뉘었다. 수율을 높이기 위하여 펙틴분해효소를 첨가한 방법이 수율이 68%로 가장 높고 압착식이 26.3%로 낮게 나타났다. PH는 큰 차이가 없었으나 당도는 압착한 방법이 6.0$^{\circ}$brix로 가장 높았고, 원심분리식이 4.5$^{\circ}$brix로 가장 낮았으며, 유리당은 모든 추출방법에서 fructose가 높은 함량을 보였다. 전체적인 유리당은 압착식이 높게 나타났다. 유자의 전처리에 따라 착즙액의 특성은 현저하게 달라지므로 유자의 전처리에 따라 음료제조시 당과 산 첨가량을 달리할 필요가 있을것으로 보인다. 원심분리식은 산이 강하고 당이 적으면 수율이 작고, 100 mesh체에 거른 추출 방법식은 수율은 너무 작고 작업의 용이성 면에서도 부적당하고 당도도 비교적 높고 수율이 높은 펙틴분해효소로 처리한 방법이 보다 적당한 가공방법으로 생각되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.600-605
• /
• 2009

A general purpose viscous flow solver Ansys CFX is used to study a Savonius type wave energy converter in a 3D numerical viscous wave tank. This paper presents the results of a computational fluid dynamics (CFD) analysis of the effect of blade configuration on the performance of 3 bladed Savonius rotors for wave energy extraction. A piston-type wave generator was incorporated in the computational domain to generate the desired incident waves. A complete OWC system with a 3-bladed Savonius rotor was modeled in a three dimensional numerical wave tank and the hydrodynamic conversion efficiency was estimated. The flow over the rotors is assumed to be two-dimensional (2D), viscous, turbulent and unsteady. The CFX code is used with a solver of the coupled conservation equations of mass, momentum and energy, with an implicit time scheme and with the adoption of the hexahedral mesh and the moving mesh techniques in areas of moving surfaces. Turbulence is modeled with the k.e model. Simulations were carried out simultaneously for the rotor angle and the helical twist. The results indicate that the developed models are suitable to analyze the water flows both in the chamber and in the turbine. For the turbine, the numerical results of torque were compared for all the cases.

• 대한조선학회논문집
• /
• 제30권3호
• /
• pp.90-99
• /
• 1993

선체 구조해석에서 유한요소의 활용에 따라 3차원적인 모델이 필요하게 되었으나 선체구조는 매우 복잡하고 주문생산에 따른 선체규격의 상이함에 의해 유한요소 모델링에 어려움이 많다고 할 수 있다. 유한요소 소프트웨어에서 제공하는 pre-processor나 geometric modeler를 활용하여 모델링을 짧은 시간내 편리하게 하기 위해서는 DB에 저장된 설계 데이타로 부터 요소형성에 긴요한 데이타들을 추출하여 사용할 필요가 있게 된다. 본문에는 engineering database의 부분적인 구현 예로서, 설계-해석 자동화의 한 분야인 유한요소 모델링에 필요한 내용들이 설계 데이터로 부터 추출되어 관계형 데이타 테이블로 정형화되는 과정이 개념적으로 나타나 있다.

• 한국환경농학회지
• /
• 제28권4호
• /
• pp.378-385
• /
• 2009

Arsenic (As) is known to be very toxic and carcinogenic to human beings. Arsenic contaminated soil was collected from a timber mill site at Busan Metropolitan City, Korea, where chromated copper arsenate (CCA) had been used to protect wood from rotting caused by insects and microbial agents. The soil was stabilized using both natural oyster shells (NOS) and calcinated oyster shells (POS). The calcination of natural oyster shells was accomplished at a high temperature in order to activate quicklime from calcite. Two different oyster shell particle sizes (-#10 mesh and -#20 mesh) and curing periods of up to 28 days were investigated. The stabilization effectiveness was evaluated based on the Korean Standard Test (KST) method (1N HCl extraction). The stabilization results showed that the POS treatment was more effective than the NOS treatment at immobilizing the As in the contaminated soils. A significant As reduction (96%) was attained upon a POS treatment at 20 wt% and passed the Korean warning standard of 20 mg/kg ('Na' area). However, an As reduction of only 47% (169 mg/kg) was achieved upon a NOS treatment at 20 wt%. The -#20 mesh oyster shells seem to perform better than the -#10 materials. The scanning electron microscopy (SEM)-energy dispersive X-ray spectroscopy (EDX) results showed that As immobilization was strongly associated with Ca and O in the presence of Al and Si.

• 한국멀티미디어학회논문지
• /
• 제16권1호
• /
• pp.108-118
• /
• 2013

최근 컴퓨터 비전, 컴퓨터 그래픽스 분야의 급속한 발전과 하드웨어의 우수한 성능으로 인해 3차원 모델링 기술 또한 급속히 발전 되었다. 그리고 다양한 3D 컨텐츠들의 등장으로 3차원 모델링 기술의 수요가 더욱 많아지고 그 질 또한 높아지고 있다. 3D 얼굴 모델은 이러한 컨텐츠들에 폭 넓게 적용될 수 있어 활용성이 높다. 본 논문에서는 주어진 한 장의 2D 정면 얼굴 영상으로부터 3D 얼굴을 모델링하는 방법을 제안한다. 이를 위해 다수의 정점으로 구성된 3D 일반 얼굴 모델을 입력 얼굴 영상과의 대응관계를 통해 변형하여 3D 얼굴을 모델링한다. 우선 AAM을 이용하여 입력된 얼굴 영상에서 특징점을 추출한다. 그리고 추출된 특징점만으로 직관적인 모델을 변형하기 위해 메쉬 워핑을 적용한다. 여기에 얼굴의 깊이 정보를 유도하기 위하여 한 장의 정면 얼굴 영상을 활용한 명도 변화 기반의 깊이 값의 추출을 시도한다. 이러한 과정을 통해 경제적으로 부담되지 않으며 사용 환경에 대한 제한이 적어 보편적으로 활용될 수 있는 3D 얼굴 모델링 방법을 구현하고 그 타당성을 실험으로 보인다.

• 방송공학회논문지
• /
• 제17권5호
• /
• pp.838-850
• /
• 2012

본 논문에서는 스테레오 영상에서 얻은 다양한 특징들을 이용하여 다시점 영상을 생성하는 방법을 제안한다. 제안된 기법에서는 먼저 주어진 스테레오 영상에서 명암변화 주목도 지도(intensity gradient saliency map)를 생성한다. 다음으로 좌우 영상 간에 블럭 단위의 움직임을 나타내는 광류(optical flow)를 계산하고 scale-invariant feature transform(SIFT) 기법을 통해 사물의 크기와 회전에 변하지 않는 영상의 특징 점을 구하여 이 특징점 간의 변이를 구한 다음, 이 두 변이 정보들을 결합하여 변이 주목도 지도(disparity saliency map)를 생성 한다. 생성된 변이 주목도 지도는 가려짐 영역 검출을 통해 오류 변이가 제거된다. 세 번째로 영상 워핑시에 직선의 왜곡을 최소화하기 위해 직선 세그먼트를 얻는다. 마지막으로 다시점 영상은 이렇게 추출된 영상 특징들을 제한 조건으로 사용하여 그리드 메쉬(grid-mesh) 기반 영상 워핑(warping) 기법에 의해 생성된다. 실험 결과를 통해 제안한 기법으로 생성된 다시점 영상의 화질이 기존 DIBR 기법보다 우수한 것을 확인할 수 있었다.

• International Journal of CAD/CAM
• /
• 제5권1호
• /
• pp.19-27
• /
• 2005

As three-dimensional range scanners make large point clouds a more common initial representation of real world objects, a need arises for algorithms that can efficiently process point sets. In this paper, we present a method for extracting smooth surfaces from dense point clouds. Given an unorganized set of points in space as input, our algorithm first uses principal component analysis to estimate the surface variation at each point. After defining conditions for determining the geometric compatibility of a point and a surface, we examine the points in order of increasing surface variation to find points whose neighborhoods can be closely approximated by a single surface. These neighborhoods become seed regions for region growing. The region growing step clusters points that are geometrically compatible with the approximating surface and refines the surface as the region grows to obtain the best approximation of the largest number of points. When no more points can be added to a region, the algorithm stores the extracted surface. Our algorithm works quickly with little user interaction and requires a fraction of the memory needed for a standard mesh data structure. To demonstrate its usefulness, we show results on large point clouds acquired from real-world objects.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권1호
• /
• pp.17-21
• /
• 2017

Vanadium slags is a kind of vanadiferous solid waste from steelmaking process. It not only occupies land, pollutes environment, but also leads to waste of resources. Based on the difference of magnetic susceptibility of different particles caused by their chemical and physical properties from vanadium slag, a new technology, superconducting high gradient magnetic separation was investigated for separation and extraction of valuable substances from vanadium slag. The magnetic concentrate was obtained under optimal parameters, i.e., a particle size -200 mesh, a magnetic flux density of 0.8 T, a slurry concentration of 5 g/L, an amount of steel wools of 25 g and a slurry flow velocity of 2 L/min. The content of $Fe_2O_3$ in concentrate could be increased from 39.6% to 55.0% and $V_2O_5$ from 2.5% to 4.0%, respectively. The recovery rate is up to 42.9%, and the vanadium slag has been effectively reused.