• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.61-69
• /
• 2005

In the global ship structure and vibration analysis, the FE(finite element) analysis model is required in the early design stage before the 3D CAD model is defined. And the analysis model generation process is a time-consuming job and takes much more time than the engineering work itself. In particular, ship structure has too many associated structural members such as stringers, stiffness and girders etc. These structural members should be satisfied as the constraints in analysis modeling. Therefore it is necessary to support generation of analysis model with satisfying these constraints as an automatic manner. For the effective support of the global ship analysis modeling, a method to generate analysis model using initial design information within ship design process, that hull form offset data and compartment data, is developed. In order to easily handle initial design information and FE model information, flexible data structure is proposed. An automatic quadrilateral mesh generation algorithm using initial design information to satisfy the constraints imposed on the ship structure is also proposed. The proposed data structure and mesh generation algorithm are applied for the various type of vessels for the usability test. Through this test, we have verified the stability and usefulness of this system including mesh generation algorithm.

• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.1-10
• /
• 2004

In the process of finite element analysis, mesh generation is tedious job which consumes tremendous time. Therefore, the automation of well shaped mesh generation from the minimal boundary input data is desirable to improve reliability and accuracy of the analysis and also to reduce the process time of the entire design process. The automation of triangular mesh generation has been relatively well treated due to its robustness and ease of handling when compared to rectangular element mesh generation. In this study, the offset method developed previously for generating plane rectangular element mesh has been corrected and modified to generate triangular element mesh on the B-spline surface having arbitrary holes. The result shows that the generated triangular mesh has the average aspect ratio over 0.9. The designed arbitrary surface shape has been interactively constructed by non-uniform B-spline theory for triangular mesh generation.

• ETRI Journal
• /
• 제36권6호
• /
• pp.1008-1015
• /
• 2014

In this paper, we present a method for reconstructing a surface mesh animation sequence from point cloud animation data. We mainly focus on the articulated body of a subject - the motion of which can be roughly described by its internal skeletal structure. The point cloud data is assumed to be captured independently without any inter-frame correspondence information. Using a template model that resembles the given subject, our basic idea for reconstructing the mesh animation is to deform the template model to fit to the point cloud (on a frame-by-frame basis) while maintaining inter-frame coherence. We first estimate the skeletal motion from the point cloud data. After applying the skeletal motion to the template surface, we refine it to fit to the point cloud data. We demonstrate the viability of the method by applying it to reconstruct a fast dancing motion.

• 한국CDE학회논문집
• /
• 제7권2호
• /
• pp.89-95
• /
• 2002

VRML data, which is mainly structural element, is frequently used for modeling and visualizing 3D objects. Although there can be variations, it is a usual practice to represent 3D shapes in VRML format. Ever since the advent of Internet, there have been strong needs to transfer shape data through Internet. Because of this need, it is necessary to transform a data file in VRML or similar format into a more convenient form to transfer through the network. In a VRML file, a model is sometimes divided into a set of triangle meshes due to several practical reasons. However, this causes various demerits for the fast transmission. Therefore, it is more efficient to merge the mesh sets into one mesh set for the transmission. In this paper, we present the problems in the merge process and the techniques to handle the situation.

• 융복합기술연구소 논문집
• /
• 제12권1호
• /
• pp.1-5
• /
• 2022

This paper describes an algorithm for generating a terrain using a noise function and a height map as one of the procedural terrain generation methods. The polygon mesh data structure to represent the generated terrain concisely and render it is also described. The Perlin noise function is used as the noise technique for terrain mesh, and the height data of the terrain is generated by combining the four noise waves. In addition, the terrain height information can be also obtained from actual image data taken from the satellite. The algorithm presented in this paper generates the geometry part of the polygon topography from the height data obtained, and generated a material for texture mapping with two textures, that is, a diffuse texture and a normal texture. The validity of the terrain method proposed in this paper is verified through application examples, and its possibility can be confirmed through performance verification.

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.776-781
• /
• 2008

In this study, ubiquitous health care system attaching in chair to monitor ECG for health care was developed at the unconsciousness state. The system conveniently and simple measured ECG at non-consciousness. We measured the contact impedance to skin-electrode of metal mesh electrodes of the system. Contact impedance enable the electrode to use for ECG measurement. The results are that the impedance of the metal mesh electrodes according to sizes is low when the size is 4$cm^2$. As the result, when the size of the metal mesh electrode is 4$cm^2$, the electrode is fit for ECG measurement. We can acquired by positing the arm on the metal mesh electrode. The ECG signal was detected using a high-input-impedance bio-amplifier, and then passed filter circuitry. The measured signal transmitted to a PC through the bluetooth wireless communication and monitored. Data of the non-constrained ECG system attaching in chair is noise-data when comparing metal mesh electrode with the Ag/Agcl electrode but the data is significant to monitor ECG for check the body state.

• 대한임베디드공학회논문지
• /
• 제16권5호
• /
• pp.215-223
• /
• 2021

3D data can be categorized into two parts : Euclidean data and non-Euclidean data. In general, 3D data exists in the form of non-Euclidean data. Due to irregularities in non-Euclidean data such as mesh and point cloud, early 3D deep learning studies transformed these data into regular forms of Euclidean data to utilize them. This approach, however, cannot use memory efficiently and causes loses of essential information on objects. Thus, various approaches that can directly apply deep learning architecture to non-Euclidean 3D data have emerged. In this survey, we introduce various deep learning methods for mesh and point cloud data. After analyzing the operating principles of these methods designed for irregular data, we compare the performance of existing methods for shape classification and segmentation tasks.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.844-847
• /
• 2011

Wireless mesh network (WMN) is a type of mobile ad-hoc network consists of wireless router, mobile clients and gateway which connects the network with the Internet. To provide security in the network it is required to encrypt the message sent among the communicating nodes in such way so that only legitimate user can retrieve the original data. Several security mechanisms have been proposed so far to enhance the security of WMN. However, there still exists a need for a comprehensive mechanism to prevent attacks in data communication. Considering the characteristic of mesh network, in this paper we proposed a public key cryptography based security architecture to establish a secure key agreement among communicating nodes in mesh network. The proposed security architecture consists of two major sections: client data protection and network data protection. Client data protection deals with the mutual authentication between the client and the access router and provide client to access router encryption for data confidentiality using standard IEEE 802.11i protocol. On the other hand, network data protection ensures encrypted routing and data transfer in the multi hop backbone network. For the network data protection, we used the pre-distributed public key to form a secure backbone infrastructure.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.202-207
• /
• 2004

In the present study a mesh generation program has been developed by using DXF file. The program consists of DXF file reading and mapping algorithm, which projects the 2-D mesh point onto the triangular surface constructed by nearest three points. The present program has been tested for mesh generations for the road tunnel ventilation analysis and analysis of lava movement in mountain area.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.30-35
• /
• 2011

In this paper, our effort to apply 3-D Virtual Reality system for stereoscopic visualization of mesh data on the web is briefly described. This study is an extension of our previous and on-going research efforts to develop an automatic grid generation program specialized for wing mesh, named as eGWing. The program is developed by using JAVA programming language, and it can be used either as an application program on a local computer or as an applet in the network environment. In this research advancing layer method(ALM) augmented by elliptic smoothing method is used for the structured grid generation. And to achieve a stereoscopic viewing capability, two graphic windows are used to render its own viewing image for the left and right eye respectively. These two windows are merged into one image using 3D monitor and the viewers can see the mesh data visualization results with stereoscopic depth effects by using polarizing glasses. In this paper three dimensional mesh data visualization with stereoscopic technique combined with 3D monitor is demonstrated, and the current achievement would be a good start-up for further development of low-cost high-quality stereoscopic mesh data visualization system which can be shared by many users through the web.