• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.476-483
• /
• 2003

A mathematical model is presented to predict the two-phase flow and heat transfer phenomena of the evaporating extended meniscus region in a micro-channel. The pressure difference at the liquid-vapor interface can be obtained by the augmented Laplace-Young equation. The correlative equations for film thickness, pressure, and velocity in the meniscus region are derived by applying the mass, momentum, and energy equations into the control volume. The results show that increasing the heat flux and the liquid inlet velocity cause the length and liquid film thickness of the extended meniscus region to decrease. The variation, however, of the heat flux and liquid inlet velocity has no effect on the profile of film thickness. The majority of heat is transferred through the thin film region that is a very small region in the extended meniscus region. It is also found that the vapor velocity increases gradually in the meniscus region. However, it increases sharply at the junction of the meniscus and thin film regions.

• Journal of Acupuncture Research
• /
• 제40권1호
• /
• pp.90-96
• /
• 2023

The discoid meniscus is an innate modified form of the meniscus, characterized by middle hypertrophy and a larger than the regular diameter, leading to an absence of the characteristic "C" arrangement. Previously, no study has reported the traditional Korean medicine treatment of knee pain mainly due to discoid meniscus. Here, we report two cases of a discoid meniscus of the knee as the cause of knee pain. Patients were diagnosed with magnetic resonance imaging for discoid meniscus and received traditional Korean medicine treatments, including pharmacopuncture, acupuncture, herbal medicine, and chuna. The pain was alleviated when assessed by patient-reported pain scale scores, and the general knee condition was improved. Thus, traditional Korean medicine treatments could be effective for patients who had discoid meniscus of the knee joint in this case report.

• 대한기계학회논문집B
• /
• 제31권4호
• /
• pp.313-319
• /
• 2007

The effect of capillary cross-section geometry on evaporation is investigated in terms of the meniscus shape, evaporation rate and evaporation-induced flow for circular, square and rectangular cross-sectional capillaries. The shapes of water and ethanol menisci are not much different from each other in square and rectangular capillaries even though the surface tension of water is much larger than that of ethanol. On the other hand, the shapes of water and ethanol menisci are very different from each other in circular capillary. The averaged evaporation fluxes in circular and rectangular capillaries are measured by tracking the meniscus position. At a given position, the averaged evaporation flux in rectangular capillaries is much larger than that in circular capillary with comparable hydraulic diameter. The flow near the evaporating meniscus is also measured using micro-PIV, so that the rotating vortex motion is observed near the evaporating ethanol and methanol menisci except for the case of methanol meniscus in rectangular capillary. This difference is considered to be due to the existence of corner menisci at the four comers.

• 한국주조공학회지
• /
• 제24권1호
• /
• pp.26-33
• /
• 2004

The pressure of the mold flux acting on the meniscus shell was investigated through the coupling analysis of heat transfer in the mold and fluid flow in the flux caused by the mold oscillation. Finite element method was employed to solve the conservation equation associated with appropriate boundary conditions. As reported by previous workers, the axial pressure is positive on the negative strip time and negative on the positive strip time. A maximum pressure is predicted toward the top of the meniscus shell which has the thin shell arid a maximum value is in proportion to the relative mold oscillation velocity. The relative mold oscillation velocity was changed by the effect of meniscus level fluctuation. Therefore the pressure of the mold flux acting on the meniscus shell was different each cycle of the mold oscillation due to the irregularity of relative mold oscillation velocity.

• 대한한의학회지
• /
• 제43권1호
• /
• pp.154-170
• /
• 2022

Objectives: The purpose of this study was review the current clinical studies about the effect of Korean traditional medicine treatment for meniscus injury. Methods: Clinical studies on Korean traditional medicine treatment of meniscus injury were searched through 11 online databases. We analyzed the authors, publication year, country, study design, subjects, treatment methods, treatment effects, evaluation tools and adverse events of the selected studies. Results: 23 studies which included 9 randomized controlled trials, 8 case reports, 4 retrospective observational studies, 2 non-randomized controlled trials were selected through the databases. A total of 9 Korean traditional medicine treatments were used, among them, acupuncture treatment was the most used. The most commonly used outcome was effective rate. Conclusions: Through this study, we could confirm that Korean traditional medicine is an effective treatment for meniscus injury. It was suggested that various clinical studies on the effects of Korean traditional medicine for meniscus injury are needed and it is necessary to establish more scientific evidence through studies with a high level of evidence.

• Journal of Acupuncture Research
• /
• 제19권6호
• /
• pp.221-233
• /
• 2002

Background and Purpose : MRI(Magnetic Resonance Imaging) has become one of the most sensitive diagnostic tool no evaluate problems of the knee, because it enables us to identify not only osseous tissue but also soft tissues including muscle, fascia, tendon, ligament, meniscus and fat around the knee joint. Objective : To compare between MRI reading and pain, duration, physical examination in patients with pain of knee joint. Methods : 20 patients with pain of knee joint included in this study. This study researched pain-degree, duration, physical examination with pain of knee joint. Using MRI(Horizon Lx 1.0T-GE), we obtained the results. Results : 1. In the distribution of sex; Female rate was 80.0% and male rate was 20.0%. In the distribution of age, above sixty group was the largest group by each 55.0%. 2. In the distribution of MRI reading; 'Meniscus horm tear' was 70.0%, 'Osteoarthritis' was 55.5%, 'ACL partial tear' was 15.0%, 'Bone bruise at tibia, femur' was 15.0%. 3. Correlation between duration of pain and MRI reading showed that acute and subacute stage related various MRI reading, that chronic stage related 'Osteoarthritis' and 'Meniscus horn tear' by each 69.2%, 92.3%. 4. Correlation between pain and MRI reading showed that severe pain(GVI) related 'ACL partial tear, PCL partial tear' by each 100%, that mild pain(GII) related 'Osteoarthritis, Meniscus horn tear' by each 70.0%, 80.0%. 5. Correlation between physical examination and MRI reading showed that Drawer test related ACL partial tear by each 60.0%, that McMurray test related 'Meniscus horn tear' by each 75.0%. 6. Correlation between effect of treatment and MRI reading showed that 'Osteoarthritis, Meniscus horn tear' related good effect, that ACL partial tear related poor effect. Conclusions : These results suggest that acute and sever pain relate 'ACL partial tear, PCL partial tear', that chronic and mild pain related 'Osteoarthritis, Meniscus horn tear'. So it is responsibility to use MRI as a sensitive diagnostic tool in the knee problems.

• 척추신경추나의학회지
• /
• 제17권2호
• /
• pp.17-25
• /
• 2022

Objectives This study aimed to evaluate the efficacy of manual therapy for knee meniscus injuries. Methods We searched seven electronic databases (MEDLINE, Cochrane Library, CAJ, Wanfang, RISS, ScienceON, and OASIS) to collect randomized controlled trials (RCTs) using the keywords "manual therapy OR chuna OR tuina" and "meniscus injury." Results Eleven RCTs were selected based on the inclusion criteria, and all studies were conducted in China. Five studies were meta-analyzed. The systematic review revealed a positive effect of manual therapy for knee meniscus injury. Low risk of selection, attrition, and reporting bias were demonstrated in all studies. Ten studies had a high risk of performance bias. Conclusions The systematic review reported favorable results using manual therapy for knee meniscus injury. However, this study has several limitations because of the high risk of bias. Further clinical studies and reviews with higher levels of evidence are warranted.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권4호
• /
• pp.351-357
• /
• 2013

플립칩 패키징에서 언더필 공정은 칩과 기판 사이를 에폭시로 채워서 본딩하는 공정으로 제품의 신뢰성 향상을 위해 수행되어 진다. 이 언더필 공정은 모세관 현상에 의해서 이루어지는데 유체의 계면과 범프의 배열이 계면 운동에 미치는 영향으로 인하여 공정 중 예기치 않은 공기층을 형성하게 된다. 본 연구에서는 모세관 언더필 유동에서 나타나는 비정상 계면 유동을 가시화하여 범프 배열에 따른 레이싱 효과와 계면의 병합 현상에 대하여 고찰하였다. 그 결과, 플립칩 내부의 범프가 고밀도일수록 유체의 흐름방향과 수직방향의 유동이 더욱 활발하게 진행되어 더 많은 공기층이 형성되었으며, 엇갈린 배열일 경우 직각 배열에 비해 이러한 현상이 더 지배적으로 나타난다.

• Journal of Acupuncture Research
• /
• 제34권3호
• /
• pp.109-119
• /
• 2017

Objectives : The purpose of this report was to show that oriental therapy, specifically Shinbaro pharmacopuncture is effective for improvement of symptoms and and range of motion (ROM) in patients diagnosed with meniscus tears in the knee. Methods : Three patients were treated with herbal medicine, acupuncture, cupping, Shinbaro pharmacopuncture. The efficacies of the treatments in the three cases were assessed and the progress of the three cases were measured Numerical Rating Scale (NRS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), European Quality of Life five dimensions dimensions (EQ-5D), and range of motion (ROM) measurements. Results : After all the treatments, NRS, WOMAC, and EQ-5D decreased. Active and passive ROM of the knee increased. Conclusion : These reports show the effect of Shinbaro pharmacopucture on a meniscus tear. Due to the small number of cases in this study, further case reports are needed.

• 한국주조공학회지
• /
• 제41권3호
• /
• pp.241-251
• /
• 2021

7000계 알루미늄 합금은 다른 Al 합금에 비해 강도가 우수하여 주목을 받고있으며, 7000계 알루미늄 빌렛은 일반적으로 Direct-Chill (DC) 주조 공정을 통해 제조된다. DC 주조 공정으로 제조된 알루미늄 빌렛의 표면 결함은 주로 Exudation과 Meniscus freezing 현상과 관련이 있으며, 이는 합금 성분, 주조 속도 및 주조 온도의 영향을 받는다. 특히, 7000계 알루미늄 합금은 응고 과정에서 응고 온도 범위가 넓어 주조 결함이 발생하기 쉽다. 본 연구에서는 DC 주조 공정에 의해 제조된 Al-8Zn-2Mg-2Cu 합금 빌렛에 대한 표면 결함 변화에 대하여 조사하였다. 빌렛의 표면은 "Wavy" 또는 "Dot" 표면으로 관찰되었다. Wavy 표면은 낮은 주조 속도(200mm/min)와 온도(655℃)에서 Meniscus freezing 현상에 의해 형성되었으며, Concave 영역에서 Meniscus freezing 현상으로 인한 조성작 과냉으로 인해 미세한 수지상 조직이 관찰되었다. 반면에, 주조 온도가 높은 조건(675℃)에서는 Dot 표면이 기공 형성에 의해 형성되었으며, 높은 주조 속도(230mm/min)에서 제조된 Dot 표면을 갖는 빌렛에서는 높은 금속 수두압에 의해 Exudation 층이 형성되었다. Exudation 층의 Dot 영역과 Smooth 영역은 각각 미세한 수지상 형태와 주상정 형태의 조직이 관찰되었으며 이는 Dot 영역에서 가스 기공의 형성에 의한 결과이다.