• 복식문화연구
• /
• 제19권6호
• /
• pp.1150-1162
• /
• 2011

Considering the fact that the fit for men's clothes is important for the sizing system modern ready-made pants, an analysis of obese middle-aged men is required at this period of time to determine the appropriate fit for obese men. The following research focused on 635 middle-aged obese men who had a BMI index of at least 25 and a waist circumference from the belly-button level of 34 inches or more. This research deals with the articles of circumference, thickness and other major physical changes that happen during the 30s, 40s, and 50s. According to the analysis of these body measurement articles with specific regard to age, men's height and the height of their waist seemed to decrease as their age increased. This demonstrates that as these men grow older, the waist and stomach slowly curved into a circular and flat body type due to their obesity. In this study, the first factor figure was the height and leg length. The second factor figure was the waist form. The third factor figure was the center thigh circumference. The fourth and fifth factor figures were the hip length and shape. Lastly, the sixth factor figure was the calf circumference. These 6 factor figures construct 80.57% of the volume explanation and showed 3 patterns through a cluster analysis that showed different patterns of obesity forms for waist circumferences in key figure 1, waist and thigh circumferences in key figure 2, and waist and buttocks circumferences. Therefore, it was worthwhile to consider the circumferences of the waist, buttocks and thigh according to the body type category to enhance the drafting of well-fitting pants.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.357-366
• /
• 2004

The purpose of this study is to classify the types of men's back and chest through the criteria which represent the characteristic of men's back and chest. We have the following conclusions based on our sample size of 291 men's back and chest. The result of factor analysis concerned with men's back indicates that six factors are extracted and they are consist of 80.6% of total variance. We divide the shape of back into three categories: bent, protrusion of the scapula, and breadth. Each category is divided into subcategories. According to the frequency based on our data entries of 291 men's back, we introduce five new types of men's back. 83.8% of examined men's back belong to one of these five types: (i) 15.5% of protrudent and lordotic type; (ii) 6.5% of flat and lordotic type; (iii) 22.7% of protrudent and normal type; (iv) 34.4% of flat and normal type; (v) 4.8% of flat and bent type. The result of factor analysis related to with men's chest shows that six factors are extracted and they are consist of 76.0% of total variance. We divide the shape of chest into three categories: thickness, breadth, and protrusion of the breast. Each category is divided into subcategories. According to the frequency based on our data entries of 291 men's chest, we introduce four new types of men's chest. 65.0% of examined men's chest belong to one of these four types: (i) 7.2% of full and well-developed type; (ii) 24.1% of full and developed type; (iii) 25.8% of flat and developed type; (iv) 7.9% of flat and under-developed type. In order to consider the shape of the upper body as a whole, the back and the chest types should be corresponded.

• 대한인간공학회지
• /
• 제35권6호
• /
• pp.581-594
• /
• 2016

Objective: The purpose of this study is to develop an all- in-one collar shirt with excellent appearance which is well suited to the body shape of the male adults. Background: As men's casual wear has recently become more casual and the number of cool biz wearing in the summer has increased, a variety of shirt colors have been preferred in addition to shirt collar. However, studies on the design and pattern development of men's casual shirt collars are very rare. So we have identified the necessity of various development and research of men's shirts. Method: We collected 8 all-in-one collar patterns for shirts from professional pattern books and men's shirt brands. Also, based on anthropometric data from the 6th Size Korea, we selected 5 subjects with measurements similar to the average adult men, manufactured shirts based on them and conducted a wearing test by 5 experts. Results: After selecting shirts with good fit and appearance, we developed a prototype of all-in-one collar. As for front appearance evaluation, E1 pattern had the most outstanding shape and size, and C1 pattern had the most natural creases and front adjustment curves. As for side appearance evaluation, C1 had the highest overall scores, and E1 pattern on outer line. As for back appearance evaluation, C1 pattern had the highest score. Conclusion: We suggested new all-in-one collar and shirt patterns. In addition, the prototype of the all-in-one collar shirt design was presented by reflecting results of the wearing test and preference survey. Application: The shirt's design and patterns could be manufactured using the developed patterns. It will fit well with the body shape of adult males and will be highly satisfied by them.

• 대한가정학회지
• /
• 제48권4호
• /
• pp.43-55
• /
• 2010

With the sex role changes in the post-modern society, men are becoming increasingly interested in appearance and their bodies. Male muscles in particular, which also is a visual manifestation of masculine strengths, has become the focal interest for those men who care about appearance management. The purpose of this study was to identify the extent to which Korean culture emphasizes muscles in defining masculine body, and to understand Korean men's perception of muscle building and their bodies. For this purpose, a content analysis and a survey were conducted. The content analysis aimed at identifying the ideal masculine image represented in the ads featured in male fashion magazines. For the purpose of comparison, U.S. magazines were also examined. The result showed that male models' images shown in Korean magazines were not significantly different from the male images in American magazines in terms of the body size, muscularity, and the nudity of the models. A survey to 339 men aged between 20 to 50 living in Seoul area was conducted to explore the motives of muscle building, the criteria men use to evaluate muscled bodies, and the influence of muscle building on body satisfaction. Factor analysis and analyses of variances followed by Scheffe multiple comparisons were conducted for data analysis. The results showed that physical appearance improvement is one of the motives of muscle building especially for younger men. Muscle building in general is found to contribute positively to men's body satisfaction.

• 한국의류학회지
• /
• 제31권3호
• /
• pp.463-474
• /
• 2007

With rapid expansion in e-retailing of apparel business, personalized fitting model service shows the possibility as the differentiated marketing strategy in cyber shopping. According as necessity of personalized fitting model construction rises, it is tried personalized fitting model creation in several fields such as computer engineering, mechanical engineering, information engineering. But, because existent study was concentrated only on human body modeling, it does not reflect average morphological characteristics of human body properly. In this study, we wish to examine if morphing is fit for expressing characteristic of average human body shape and suggest desirable morphing. We used 3-D scan data of 254 Korean middle aged men collected by Size Korea 2004. The result of this study are as follows: Lower body types were categorized by height hip girth and lower drop(hip girth-navel girth) which were main factors of lower body shape. Then each factor was divided into 3 groups respectively, 30% in the middle, over 30%, under 30%. In 27 groups, the group which belonged to 30% in the middle of height, 30% in the middle of hip girth, 30% in the middle of lower drop was selected as a representative group. We tested geometrical figure by differ volume, tilt, position of point. And we created a representative type of men's lower bodies by morphing the representative group and analyzed it's horizontal, vertical sections. A representative type which was created by morphing reflected a real body and changed realistically at the part of hip, crotch, calf muscle and so on. A cross sections of a representative type were similar to average cross sections of the representative group in size and shape. So it was proved that morphing was successful.

• 한국의류학회지
• /
• 제26권10호
• /
• pp.1443-1454
• /
• 2002

The purposes of this study were to classify body type of adult males into several kind of shape and to provide the characteristics of size of each group which has same shape. As the sample, subjects were 1290 males of 20 to 54 year-old. The procedure and results were follows; 1. As the result of the previous reserch, the front line of body was classified in X, H, Y and A types. 2. The principal component analysis was used to obtain the shape factor of the side line of the trunk. 9 factors in the side were extracted. As the result of the cluster analysis of factor scores, the side line of body was classified in 5 types. It was named X, A, Y and H type in the front and S, D1, d, I and D2 type in the side. 3. In order to consider the shape of body as a whole, the body shape of the front and side were compounded. The whole body shapes of adult male were very various, and 6 body shapes, XS, YS, Yd, YI, AD2 and HD1 were selected as the basic types. In each type of body, several groups were classified by size factor, height and chest girth and master size was selected considering appearance frequency.

• 대한인간공학회지
• /
• 제26권4호
• /
• pp.103-111
• /
• 2007

The purpose of this study is to categorize and analyze the body shape of obese Korean men that are needed for industrial design. Using the anthropometric data that were surveyed through the 5^th Size Korea project, this study was conducted in four steps mostly through the multivariate statistical analysis. In the first step, Broca, BMI, WHR indices are used to define obesity and select obese men from Korean adults and teens. After 34 human anthropometric variables are supposed to be related to obesity were extracted through an expect survey. In the second step, a factor analysis was executed for those human anthropometric variables. Through this analysis, we obtained the human body factors that are related to the representation of obesity. Then the third step, we used a cluster analysis from the result of the factor analysis. And ANOVA analysis was also conducted to obtain the critical obese human anthropometric variables. In the final step, we found the characteristics of the body types of obese men according to clusters and ages. The body types of obese men classified in the study are expected to be applied to product design for clothing, furniture, automobile packaging, etc.

• 복식문화연구
• /
• 제26권6호
• /
• pp.934-950
• /
• 2018

This study suggests a new perspective for designing men's tailored jackets by more carefully considering human muscle structure. For this study, we examined research regarding the construction of the tailored jacket that is based on costume history references, as well as research regarding human muscle structure that is based on human anatomy references and the analysis of recent fashion designs illustrating the human body image. Based on this research, we developed various tailored constructions that account for human muscle structure. These constructions are applied primarily to the backs of four tailored jackets, as the back of the jacket needs a mechanism to accommodate the wearer's movement. The following conclusions have been derived from the study: First, by developing the tailored garment structure that accounts for the muscle structure of the human body, we suggest a new design direction for tailored garments. Second, we propose a new type of tailored jacket structure for the back of the jacket that incorporates an artificial muscle structure to accommodate the wearer's activities. This new type of jacket indicates the potential for designs that use structure, particularly the structure of the human body. Finally, by using the embroidery technique, we changed the texture of the material into the shape of human muscle. Thus, we propose a design that uses three-dimensional volume to accounts for the shape of human body tissue.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.113-122
• /
• 2019

In this study, I analyzed the measurement data of the early 20s male who are emphasizing the importance of good clothes in the fashion of body-contact clothes. Through this, I tried to provide basic data necessary for making clothing for early 20s male. Using data from Size Korea's 7th Human Body Survey, 588 people aged 20-25 years were analyzed and classified into four types. Type 1 have a thick and short body, narrow ankle and calf, thin legs. And the hip is not sagged, and height is a little short. So I named it 'short & thick body with bird legs'. Type 2 have a broad shoulder, slim and long body, and no sagging shoulders. So I named it 'slim inverted triangular figure'. Type 3 have a small height, thin and short body, and a thick ankle and calf. So I named it 'short & thin body with thick legs'. Type 4 have a tall height, narrow shoulder, and sagging hip and shoulders. So I named it 'Long triangle'. In order to improve fit of body-contact clothes reflecting the trend of men's wear in recent years, it is necessary to develop clothing prototypes by body type. 20s have the most ideal body shape after completion of growth, but differences in the length, thickness, and thickness of the trunk. This is reflected in the apparel pattern system, and it can be expected to increase consumers' satisfaction if they are used to make excellent ready-to-wear patterns.

• 한국의류산업학회지
• /
• 제17권2호
• /
• pp.227-236
• /
• 2015

This study analyzed the lower body type of 30's Korean men to develop a slim-fit pants pattern. As the analysis data, direct measurement data of anthropometric measured value in the 6th Size Korea(KATS, 2010) was used as basic data with 481 men in 30's as analysis objects. The result are as follows. First, the result of analyzing factors for the lower body type classification indicated five factors. Second, the result of executing group analysis (with the independent variable of 5 clusters extracted from the factor analysis)classified the following three types. Type 1(36.8%) displayed a medium height of lower body type, small waist and hip, slim and fit body type with a slim shape between the knee and ankle. The shape between the waist and hip had characteristics of a slight curve and short length. Type 2(35.6%) displayed lowest height of a lower body type that was large and thick between the waist and the hip. The drop value of the waist and the hip was small; therefore, the body type was flat with a minimal curve. The underpart type (below the knee) was the thickest and the length was short. Type 3(27.7%) displayed the highest lower body type, a medium level waist size, flat and narrow waist and belly. This body type had a curve with big drop value of the waist and the hip, lower part from the hip to the ankle (including the knee) and a thick calf with along leg.