• ETRI Journal
• /
• v.25 no.5
• /
• pp.337-344
• /
• 2003

In this paper, we introduce a fully synthesizable 32-bit embedded microprocessor core called the AE32000B. The AE32000B core is based on the extendable instruction set computer architecture, so it has high code density and a low memory access rate. In order to improve the performance of the core, we developed and adopted various design options, including the load extension register instruction (LERI) folding unit, a high performance multiply and accumulate (MAC) unit, various DSP units, and an efficient coprocessor interface. The instructions per cycle count of the Dhrystone 2.1 benchmark for the designed core is about 0.86. We verified the synthesizability and the area and time performances of our design using two CMOS standard cell libraries: a 0.35-${\mu}m$ library and a 0.18-${\mu}m$ library. With the 0.35-${\mu}m$ library, the core can be synthesized with about 47,000 gates and operate at 70 MHz or higher, while it can be synthesized with about 53,000 gates and operate at 120 MHz or higher with the 0.18-${\mu}m$ library.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.7
• /
• pp.1-8
• /
• 2020

In this paper, we present an implementation of high speed image data transfer using XDMA for a video signal generation / acquisition device developed as a military test equipment. The technology proposed in this study obtains efficiency by replacing the method of copying data using the system buffer in the kernel area with the transmission and reception through the DMA engine in the FPGA. For this study, the device was developed as a PXIe platform in consideration of life cycle, and performance was maximized by using a low-cost FPGA considering mass productivity. The video I/O board implemented in this paper was tested by changing the AXI interface clock frequency and link speed through the existing memory copy method. In addition, the board was constructed using the DMA engine of the FPGA, and as a result, it was confirmed that the transfer speed was increased from 5~8Hz to 140Hz. The proposed method will contribute to strengthening defense capability by reducing the cost of device development using the PXIe platform and increasing the technology level.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.2
• /
• pp.26-36
• /
• 1999

In this paper, the novel scheme of OAM performance management function is proposed to supply the most of network resources and reliable services by processing data having various QoS(quality of service) in the view of cell loss and cell delay of ATM networks Also, the special fields of OAM cell are defined in order to improve correlate control, operation, and management technique between networks which is required to flexibility and precision control as detecting the performance information of the variable networks periodically. The proposed OAM function, the input/output function of cell, and the interface function of the accessory device which is likely to the memory/CPU are designed to ASIC. The designed chip is carried out the back-end simulation using Verilog-XL simulator of Cadence. In result, it is able to performs an accurate control in $2{\mu}s$.

• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.460-464
• /
• 2008

To improve and optimize user interfaces of the system, the accurate understanding of users' behavior is an essential prerequisite. Direct questions depend on user' s ambiguous memory and usability tests depend on the researchers' intention instead of users'. Furthermore, they do not provide with natural context of use. In this paper we described the work which examined users' behavior through log analysis in their own environment. 50 users were recruited by consumer segmentation and they were downloaded logging-software in their mobile phone. After two weeks, logged data were gathered and analyzed. The complementary methods such as a user diary and an interview were conducted. The result of the analysis showed the frequency of menu and key access, used time, data storage and several usage patterns. Also, it was found that users could be segmented into new groups by their usage patterns. The improvement of the mobile phone user interface was proposed based on the result of this study.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.8
• /
• pp.45-52
• /
• 2011

Flash memory is becoming widely prevalent in various area due to high performance, non-volatile features, low power, and robust durability. As price-per-bit is decreased, NAND flash based SSDs (Solid State Disk) have been attracting attention as the next generation storage device, which can replace HDDs (Hard Disk Drive) which have mechanical properties. Especially for the single package SSD, if channel number or FIFO buffer size per channel increases to improve performance, the size of a controller and I/O pin count will increase linearly with channel numbers and form factor will be affected. We propose a novel technique which can minimize form factor by optimizing the number of NAND flash channels and the size of interface FIFO buffer in the SSD. For SSD with 10 channel and double buffer, the experimental results show that buffer block size can be reduced about 73% without performance degradation and total size of a controller can be reduced about 40% because control block per channel and I/O pin count decrease according to decrease channel number.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.332-346
• /
• 2003

In this paper, a system which can compress and reconstruct the digital image was implemented using 2 dimensional DWT(Discrete Wavelet Transform). The proposed system consists of the FPGA board tocompress the image and the application software(S/W) to reconstruct it. First the FPGA receives the image from AID converter and compresses the image using wavelet transform. The compressed data is transferred into the PC using the PCI interface. The compressed image is reconstructed by an application S/W inside the PC. The image compressor can compress about 60 fields per second, in which the image format was NTSC YCbCr(4:2:2) and the image size was 640${\times}$240 pixels per field. The designed hardware mapped into one FPGA occupying 11,120 LAB (Logic Array Block) and 27,456 ESB(Embedded System Block) in APEX20KC EP20K1000B652-7. It globally uses 33MHz clock and the memory control part uses 100MHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.57-64
• /
• 2011

To adjust the difference of bandwidth between host interface and NAND flash memory, DRAM is adopted as the buffer management in SSD (Solid-state Disk). In this paper, we propose cost-effective techniques to enhance SSD performance instead of using expensive high bandwidth DRAM. The SSD data can be classified into three groups such as user data, meta data for handling user data, and FEC(Forward Error Correction) parity/ CRC(Cyclic Redundancy Check) for error control. In order to improve the performance by considering the features of each data, we devise a flexible burst control method through monitoring system and a page based FEC parity/CRC application. Experimental results show that proposed methods enhance the SSD performance up to 25.9% with a negligible 0.07% increase in chip size.

• The Korean Journal of Applied Statistics
• /
• v.29 no.6
• /
• pp.1077-1094
• /
• 2016

Apache Spark is a fast and general-purpose cluster computing package. It provides a new abstraction named resilient distributed dataset, which is capable of support for fault tolerance while keeping data in memory. This type of abstraction results in a significant speedup compared to legacy large-scale data framework, MapReduce. In particular, Spark framework is suitable for iterative machine learning applications such as logistic regression and K-means clustering, and interactive data querying. Spark also supports high level libraries for various applications such as machine learning, streaming data processing, database querying and graph data mining thanks to its versatility. In this work, we introduce the concept and programming model of Spark as well as show some implementations of simple statistical computing applications. We also review the machine learning package MLlib, and the R language interface SparkR.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.1
• /
• pp.19-24
• /
• 2000

To make stacked chip packages far high-density packaging of memory chips used in workstations or PC severs, several lead-frames are to be connected vertically. Fer this purpose. Sn or Sn/Ag were electrochemically deposited on Cu lead-frames and their microstructures were examined by XRD and SEM. Then, two specimens were annealed at $250^{\circ}C$ for 10 min. and pressed to be joined. The shear stresses of joined lead-frames were measured fur comparison. In the case of Sn only, $Cu_3Sn$ was formed by the reaction of Sn and Cu lead-frames. In the case of Sn/Ag, besides $Cu_3Sn$. $Ag_3Sn$ was formed by the reaction of Sn and Ag. Compared to joined specimens made from Sn only, those made from Sn/Ag showed 1.2 times higher shear stress. This was attributed to the $Ag_3Sn$ phase formed at the joined interface.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.33-44
• /
• 2010

This paper propose the structure of real-time face detection hardware architecture for robot vision processing applications. The proposed architecture is robust against illumination changes and operates at no less than 60 frames per second. It uses Modified Census Transform to obtain face characteristics robust against illumination changes. And the AdaBoost algorithm is adopted to learn and generate the characteristics of the face data, and finally detected the face using this data. This paper describes the face detection hardware structure composed of Memory Interface, Image Scaler, MCT Generator, Candidate Detector, Confidence Comparator, Position Resizer, Data Grouper, and Detected Result Display, and verification Result of Hardware Implementation with using Virtex5 LX330 FPGA of Xilinx. Verification result with using the images from a camera showed that maximum 32 faces per one frame can be detected at the speed of maximum 149 frame per second.