• 소성∙가공
• /
• 제20권6호
• /
• pp.409-419
• /
• 2011

Membrane structures are widely used for LNG(Liquefied Natural Gas) storage tanks. This study presents a membrane structure based on the Mark-III type. For its development, a series of numerical simulation was conducted using ABAQUS and experimental investigation was carried out. The manufacturing process of the membrane was simulated. The thickness distribution predicted by the numerical approach agreed well with the experimental results.

• 한국항공우주학회지
• /
• 제38권5호
• /
• pp.421-426
• /
• 2010

본 논문에서는 코너에서 대각선방향으로 인장하중을 받고 있는 접힌자국이 있는 사각형 멤브레인에서 두께가 주름 거동에 미치는 영향을 기하학적 비선형 후좌굴 유한요소해석을 통하여 연구하였다. 멤브레인은 쉘 요소로 모델링 하였고 좌굴을 발생시키기 위하여 면외방향으로 미소의 무작위성 기하학적 결함을 메쉬에 가하였다. 해석은 접히지 않은 원멤브레인과 수직방향으로 접힌 멤브레인에 대해 수행하였고 그 결과를 비교하였다. 해석결과 멤브레인의 두께가 감소함에 따라 주름의 발생과 성장을 크게 촉진함을 알 수 있었다. 또한 접힌 자국의 초기 전개각이 증가할수록 국부주름의 낮은 하중에서 발생하였으나 전역주름으로의 성장은 지연되는 경향을 보였다.

• 멤브레인
• /
• 제14권1호
• /
• pp.57-65
• /
• 2004

PDMS (polydimethylsiloxane) 복합막을 통한 기체분리 공정에서 다공성 지지체의 투과저항과 PDMS 코팅두께가 에틸렌/질소의 분리성능(투과도, 선택도)에 미치는 영향에 관하여 조사하였다. 이를 위해 Pinnau 등이 제시한 복합막 투과저항 모델이론식〔1〕이 사용되었다. 지지체의 투과도 또는 투과저항은 PES (polyethersulfone)/NMP(N-methyl-2-pyrrolidone) 고분자 용액의 농도를 변화시키면서 조절하였다. 복합막은 PES 지지체 위에 n-hexane에 녹인 2액형 PDMS 용액을 spin coater를 사용해 코팅하여 제조하였다. 선택층의 코팅 두께는 spin coater의 회전속도를 통해 조절하였다. 투과기체 분리특성은 단일기체 투과도 측정 장치를 통해 조사하였으며, 지지체 및 복합막의 단면구조 및 코팅두께는 SEM (scanning electron microscope)을 통하여 확인하였다 얻어진 실험결과는 복합막의 투과저항모델의 이론식과 매우 잘 일치함을 확인 할 수 있었다. 에틸렌/질소의 분리에 있어 PDMS 막 고유의 선택도를 얻기 위해서는 지지체의 투과저항과 코팅층의 최적화가 중요함을 확인하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.109-112
• /
• 1997

The Hydrodynamic performance of the trileaflet polymer prosthetic valves depends on the design of the leaflet and the physical properties of the leaflet membrane. In order to study the effect of leaflet membrane elasticity on the hemodynamic performance of trileaflet prosthetic valve, leaflet membranes are manufactured using two different polymers - Biospan and Tecoflex SG-93A. The hemodynamic performance parameters are measured under steady and physiological pulsatile flow, and compared with monoleaflet polymer valve(floating valve) and bileaflet mechanical valve(St. Jude Medical valve). Well designed trileaflet valve shows the lowest mean pressure drop among the tested valves. The trileaflet valves with Biospan membrane show lower pressure drop and back low comparing to those with Tecoflex membrane. More elastic membrane may provide wide opening area during systole and close membrane ree edge contact during diastole. Durability of trileaflet valves are also tested in vitro. Trileaflet valves with non-uniform membrane thickness ail within 17 days because of stress concentration. Trileaflet polymer valves with uniform membrane thickness perform well over 55 days without failure.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.67-74
• /
• 2002

New immunoprotecting membranes were prepared by spin coating the amphiphilic random multiblock copolymers of poly(ethylene glycol) (PEG) and poly(tetramethylene ether glycol) (PTMEG) or poly(dimethyl siloxane) (PDMS) on porous Durapore(R) membrane. The copolymer coating was intended to make a biocompatible, immunoprotecting diffusional barrier and the supporting porous substrate was for mechanical stability and processability. By filling Durapore(R) membrane pores with water, the penetration of coating solution into the pores was minimized during the spin coating process. A single coating process produced a completely covered thin surface layer (~1 ${\mu}{\textrm}{m}$ in thickness) on the porous substrate membrane. The permselectivity of the coated layer was influenced by PEG block length, polymer composition, and thickness of the coating layer. A composite membrane with the coating layer prepared with PEG 2 K/PTMEG 2 K block copolymer showed that its molecular weight cut-of fat any 40 based on dextran was close to the molecular size of IgG (Mw = 150 kDa). However, IgG permeation was detected from protein permeation test, while glucose oxidase (Mw = 186 kDa) was not permeable through the coated membrane.

• 폴리머
• /
• 제28권4호
• /
• pp.352-359
• /
• 2004

트립토판, 타이로신, 페닐알라닌과 같은 라세미 화합물의 광학 분할을 위해 광학 선택성 분리막을 이용한 막 분리법을 이용하였으며, 사용된 분리막 제조를 위해서 막 재료로 알진산나트륨 (sodium alginate)을, 가교제로 글루타르알데하이드 (glutaraldehyde)를 사용하였다. 제조된 막의 구조는 FT-IR을 이용하여 관찰하였고 라세미화합물의 광학 분할 메카니즘을 확인하기 위해서 모델링을 실시하였다. 막의 가교정도, 공급액의 농도, 조작압력, 그리고 공급액의 증류에 따른 막의 투과 특성을 알아보기 위해 여러 가지 변수를 통한 실험을 실시하였으며, 그 결과 막의 가교도와 두께가 증가할수록, 공급액의 농도와 용질의 크기가 감소할수록 즘 더 높은 광학 분할 능을 나타낸다는 것을 발견하였으며 이때의 enantiomeric excess (%ee) 값은 약 77%로 나타났다.

• Journal of Korean Neurosurgical Society
• /
• 제55권5호
• /
• pp.244-247
• /
• 2014

Objective : The aim of this study was to evaluate the microanatomy and histological features of the central myelin in the root exit zone of facial nerve. Methods : Forty facial nerves with brain stem were obtained from 20 formalin fixed cadavers. Among them 17 facial nerves were ruined during preparation and 23 root entry zone (REZ) of facial nerves could be examined. The length of medial REZ, from detach point of facial nerve at the brain stem to transitional area, and the thickness of glial membrane of central myelin was measured. We cut brain stem along the facial nerve and made a tissue block of facial nerve REZ. Each tissue block was embedded with paraffin and serially sectioned. Slices were stained with hematoxylin and eosin (H&E), periodic acid-Schiff, and glial fibrillary acid protein. Microscopy was used to measure the extent of central myelin and thickness of outer glial membrane of central myelin. Thickness of glial membrane was examined at two different points, the thickest area of proximal and distal REZ. Results : Special stain with PAS and GFAP could be differentiated the central and peripheral myelin of facial nerve. The length of medial REZ was mean 2.6 mm (1.6-3.5 mm). The glial limiting membrane of brain stem is continued to the end of central myelin. We called it glial sheath of REZ. The thickness of glial sheath was mean $66.5{\mu}m(40-110{\mu}m$) at proximal REZ and $7.4{\mu}m(5-10{\mu}m$) at distal REZ. Conclusion : Medial REZ of facial nerve is mean 2.6 mm in length and covered by glial sheath continued from glial limiting membrane of brain stem. Glial sheath of central myelin tends to become thin toward transitional zone.

• 한국안전학회지
• /
• 제10권4호
• /
• pp.47-59
• /
• 1995

The perchlorate, thiocyanate, and nitrate ion-selective PVC membrance electrode for measuring hazardous anion in waste water were developed by incorporating the quaternary ammonium salts as active material. Ion-selective characteristics in waste water were studied by the useful pH range, the selective coefficients to various interfering anions, and the stability of electrode potential. DBP was best as a plasticizer. The effect of the membrane thickness on the electrode characteristics was improved with decreasing the membrane thickness, but below the optimum membrane thickness the electrode exhibited an inverse trend. The electrode potential of perchlorate, thiocyanate, and nitrate electrode with TDDA, as active material, was stable within the pH range 4-11, 3-12, and 4-10 repectively. And the long-term potential stability of these electrodes were 3.0, 3.5, and 3.5 months respectively. The order of the selectivity coefficients was as shown below ; $ClO_4{^-}$ > $SCN^-$ > $I^-$ > $NO_3{^-}$ > $Br^-$ > $CN^-$ > $F^-$ > $Cl^-$ > $Ac^-$ > $H_2PO_4{^-}$, $SO_4{^-}$.

• 센서학회지
• /
• 제15권1호
• /
• pp.65-70
• /
• 2006

Characteristics of thin-film NTC thermal sensors fabricated by micromachining technology were studied as a function of the thickness of membrane. The overall-structure of thermal sensor has a form of Au/Ti/NTC/$SiO_{X}$/(100)Si. NTC film of $Mn_{1.5}CoNi_{0.5}O_{4}$ with 0.5 mm in thickness was deposited on $SiO_{X}$ layer (1.2 mm) by PLD (pulsed laser deposition) and annealed at 873-1073 K in air for 1 hour. Au(200 nm)/Ti(100 nm) electrode was coated on NTC film by dc sputtering. By the results of microstructure, X-ray and NTC analysis, post-annealed NTC films at 973 K for 1 hour showed the best characteristics as NTC thermal sensing film. In order to reduce the thermal mass and thermal time constant of sensor, the sensing element was built-up on a thin membrane with the thickness of 20-65 mm. Sensors with thin sensing membrane showed the good detecting characteristics.

• 공업화학
• /
• 제9권2호
• /
• pp.200-206
• /
• 1998

수면전개법에 의해 제조된 박막의 두께에 대한 고분자용액의 표면장력과 점도의 영향을 검토하였다. 수면에서 고분자용액의 전개는 고분자용액의 표면장력과 점도에 의해 지배되며, 수면전개 박막의 두께도 이들 인자의 영향을 받는다. 고분자의 농도가 증가함에 따라 고분자용액의 표면장력과 점도는 증가하였으며, 표면장력의 크기는 PVC>PS>CA이었고, 점도의 크기는 CA>PS>PVC 였다. 고분자용액의 수면전개시 물과 고분자용액의 표면장력의 차는 전개구동력으로 작용하나 고분자용액의 표면장력과 점도는 전개저항으로 작용하였다. 수면전개 박막의 두께에 대한 고분자용액의 점도영향이 표면장력에 의한 영향 보다도 더 컸으며, 수면 전개 박막의 두께는 PS>CA>PVC 순으로 두꺼웠다.