• 한국가금학회지
• /
• 제24권1호
• /
• pp.29-37
• /
• 1997

An experiment was conducted for 20 days( from July 21 to August 10, 1996) to investigate the differences in thickness of eggshell and eggshell membrane in Korean native chicken. All the eggs were purchased from a farm located in Chinju area. All eggs were categorized into Treatment I (34.89~51.39 g), H (53.32~60.70 g), and III (34.89~60.70 g) according to their weights. Eleven items were measured in all three treatments, i.e., egg weight, egg length, egg width, breaking strength, eggshell thickness of large end(STLE), eggshell membrane thickness of large end(SMTL), eggshell thickness of small end (STSE), eggshell membrane thickness of small end(SMTS), eggshell thickness of middle part(STMP), and eggshell membrane thickness of middle part(SMTM). Correlation coefficients between egg weight and eggshell weight, among eggshell thickness of large end, small end and middle end and eggshell weight were significant (P<0.01). Correlation coefficients between egg weight and large eggshell membrane were nega-tively significant(P<0.01). Breaking strengths were higher in Treatment I than in Treatment H. Correlation coefficients among thickness of eggshell and eggshell membrane at each point at 3 parts of large end, small end and middle end were not significant.

• Korean Chemical Engineering Research
• /
• 제55권4호
• /
• pp.473-477
• /
• 2017

고분자 전해질 연료전지(PEMFC)의 고분자 막은 PEMFC 성능과 내구성에 많은 영향을 준다. 본 연구에서는 고분자막의 두께가 성능과 내구성에 미치는 영향을 파악하기 위해 두께가 다른 Nafion 막의 수소투과도, 불소 유출 속도(FER), 수명, 성능을 측정했다. 막 두께에 따른 수소투과도, 수소투과도와 FER과의 관계, FER과 수명과의 관계로부터 막 두께와 수명의 관계를 얻었다. 막이 두꺼워지면 수소투과도와 FER이 작아지면서 수명이 증가하였다. 반면에 막이 두꺼워지면 막 저항이 증가하면서 성능은 감소하였다. 성능과 내구성을 동시에 만족시키는 막 두께 범위는 $25{\sim}28{\mu}m$였다.

• 멤브레인
• /
• 제24권3호
• /
• pp.240-248
• /
• 2014

열유도상분리법(TIPS) 및 연신의 복합공정을 적용하여 막증류(Membrane distillation, MD)용 다공성 PVDF 중공사 분리막을 제조하였다. 분리막의 투과도를 증가시키기 위하여 분리막 투과도를 향상시킬 수 있는 성능인자들 중 분리막의 벽두께를 감소시키고자 하였다. 분리막의 두께를 감소시키기 위하여 분리막 제조 시 토출량을 감소시키고 중공 형성 시 주입하는 bore fluid 주입량을 증대시켰다. 토출량의 감소 및 bore fluid의 증가에 따라 벽두께는 감소하였고, 공기투과도와 수투과도는 크게 증가하였으며, 결과적으로 막증류 공정에 적용 시 투과플럭스도 증가하는 경향을 보여 주었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.429-432
• /
• 2006

Characteristics of heat and water transfer in gas-to-gas membrane humidifiers have been experimentally investigated for various humidity rod flow rates of gas and for different thickness of Nafion membrane. The results emphasizes the importance of flow velocity for both water and heat transfer. Also, the effect of membrane thickness has been revealed to be significant to water transfer especially for unsaturated flows, while the significance of membrane thickness is minimal to heat transfer.

• 멤브레인
• /
• 제29권5호
• /
• pp.263-275
• /
• 2019

본 연구에서는 종결정 크기, 종결정 코팅양, 수열 용액 숙성시간을 조절함으로써 분리층 두께가 제어된 모데나이트 제올라이트 분리막을 제조하고, 분리층 두께가 투과증발 물 투과유속에 미치는 영향을 90 wt.% 에탄올 수용액에서 고찰하였다. 유성 밀을 이용해 종결정을 분쇄시켜 20~30 nm 크기의 종결정을 제조하였고, 진공여과코팅 중에 종결정 용액의 농도와 통과된 양을 바꿔주면서 코팅양을 조절하였다. 제조된 분리막은 분리층 두께가 얇을수록 더 높은 물 투과유속을 나타내었으며, 약 $4{\mu}m$ 두께를 갖는 분리막의 경우, 760의 높은 물/에탄올 선택도와 $1.0kg/m^2h$의 높은 물 투과유속을 나타내었다. 이는 나노크기 종결정을 사용하여 $4{\mu}m$ 두께로 분리층을 얇게 만들었기 때문으로 판단된다. 따라서 본 연구로부터 종결정의 크기와 진공여과 코팅양, 수열 용액 숙성시간을 조절하는 것은 분리 층의 두께를 효과적으로 조절할 수 있는 방법임을 알았다. 또한, 모데나이트 제올라이트 분리층의 두께를 얇게 하는 것이 분리막의 물 투과유속을 증진시키는 중요한 방법임을 확인하였다.

• 한국안전학회지
• /
• 제9권1호
• /
• pp.68-75
• /
• 1994

The cetylpyridium ion-selective electrode were developed by dibenzo-18-crown-6 for auto control of the chemical plants. The effect of content of active material and the membrane thickness on the response characteristics of electrode such as the linear reponse range, the detection limit, and Nemstian slope of the electrod, were studied. The electrode characteristics was better with decreasing the content of active material above the optimum content, but became worse below these. DBP was best as a plasticizer, The effect of the membrane thickness on the electrode characteristics was improved with decreasing the membrane thickness, but below the optimum membrane thickness the electrode exhibited an inverse trend.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.858-864
• /
• 2018

Graphene oxide (GO) laminate is a new promising material for water purification system, which has extraordinary permeability only for water molecule. It consists of numerous nano-channels, in which water molecules could be nano-confined, resulting in slip of the molecules for very fast transportation speed. In this study, water penetration rate via different thickness of GO membrane according to driven pressures are measured experimentally, so that speed of water molecules and permeability are evaluated. Generally, water penetration rate via a membrane with macroscopic-sized channel increases linearly with pressure difference between up and bottom side of the membrane, but that via GO membrane approaches asymptotic value (i.e. saturation) as like a log function. Moreover, the permeability of GO membrane was observed in inverse proportion to its thickness. Based on the experimental observations, a correlation for volume flux via GO membrane was suggested with respect to its thickness and external pressure difference.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.487-493
• /
• 2004

본 연구는 고효율 비접촉 초음파 송수신이 가능한 미세가공 정전용량형 초음파 탐촉자(cMUT)를 개발하기 위한 기초연구로 수행되었다. cMUT의 주요 구성요소인 미세 진동 막의 거동-총진 주파수, 막 변위, 막 붕괴 변위, 막 붕괴전압-을 이론적인 해석과 유한요소해석을 이용하여 분석하였다. 진동 막의 두께와 크기, 희생층 두께, 전극의 두께와 크기 등과 같은 cMUT의 설계인자를 검토하였다. 분석결과 진동 막의 공진주파수는 진동 막의 두께가 증가함에 따라 증가하였으며 직경에 따라서는 감소하였다. 직류 바이어스 전압이 증가함에 따라 진동 막의 변위는 증가하였으며 진동 막의 붕괴전압을 분석하였다.

• 한국표면공학회지
• /
• 제42권5호
• /
• pp.232-239
• /
• 2009

This study presented the effect of membrane thickness on hydrogen permeability. Microvoids on the surface of the membrane should not exist for the exact values of hydrogen permeability. Pd-Cu-Ni hydrogen alloy membranes were fabricated by Ni powder sintering, substrate plasma pretreatment, sputtering and Cu reflow process. And this leaded to void-free surface and dense film of Pd-Cu-Ni hydrogen alloy membrane. Hydrogen permeation test showed that hydrogen permeability increased from 2.7 to $15.2ml/cm^2{\cdot}min{\cdot}atm^{0.5}$ as membrane thickness decreased from 12 to $4{\mu}m$. This represented the similar trend as a hydrogen permeability of pure palladium membrane based on solution-diffusion mechanism.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1738-1750
• /
• 1994

Both cylindrical cup drawing and square cup drawing are analyzed using membrane analysis as well as shell analysis by the elastic-plastic finite element method. An incremental formulation incorporating the effect of large deformation and normal anisotropy is used for the analysis of elastic-plastic non-steady deformation. The computed results are compared with the existing experimental results to show the validity of the analysis. Comparisons are made in the punch load and distribution of thickness strain between the membrane analysis and the shell analysis for both cylindrical and square cup drawing processes. In punch load, both analyses show very little difference and also show generally good agreement with the experiment. For the cylindrical cup deep drawing, the computed thickness strain of a membrane analysis, however, shows a wide difference with the experiment. In the shell analysis, the thickness strain shows good agrement with the experiment. For the square cup deep drawing, both membrane and shell analyses show a wide difference with experiment, this may be attributable to the ignorance of the shear deformation. Concludingly, it has been shown that the membrane approach shows a limitation for the deep drawing process in which the effect of bending is not negligible and more exact information on the thickness strain distribution is required.