• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.665-667
• /
• 2004

In previous studies, charged mosaic membranes having two different fixed charges in the membrane matrix indicated unique transport behavior such as preferential material transport. In this study, the composite charged mosaic membrane endurable to mechanical pressure in practical application was investigated from the same aspect of solute and solvent transport as before. Lp and ${\omega}$ estimated by taking account of active layer thickness were satisfactorily consistent with those in mosaic membrane without reinforcement. On the other hand, the reflection coefficient s indicated the negative value that suggests preferential material transport.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.642-644
• /
• 1999

We have prepared the plasma-polymerized membrane for pervaporation of organic-liquid mixtures by the plasma polymerization technique. Plasma polymerization techniques were utilized in the development of hydrophilic composite membranes having high hydrogen ion permeability and excellent dimensional stability. To develop an organic liquid permselective Membrane, suppressing membrane swearing as well as enhancing the solubility difference is impotant. the objectives of the present study are to disign a suitable membrane for an organic-mixture system by the control of the plasma-polymer solubility.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1644-1650
• /
• 2001

Mechanical properties of domestic 374 stainless steel have been evaluated fur membrane material used in LNG storage tank. LNG tank is operated around -162$^{\circ}C$. The temperature of membrane depends on LNG level. Accordingly, the membrane material is deteriorated by variation of liquid pressure and temperature. Tensile test and fatigue life test were performed at room temperature and -l62$^{\circ}C$ per code requirements. Especially the biaxial fatigue life test was conducted with shaped membrane sheet at a thermal strain of $\Delta$T=190$^{\circ}C$ The test results obtained with the domestic 304 stainless steel showed better properties compared to the values required by code.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.103-106
• /
• 2005

The material properties of membrane for stratospheric airship is experimentally investigated. Mechanical tensile properties of the membrane material at room, high and low temperature are measured using instron with thermal chamber. Experimentaly, material non-linearity is observed at room and high temperature. In order to simulate material non-linearity caused by the uniaxial extension curve of a woven fabric, the nonlinear hyperelastic problem is considered with finite clement program of ABAQS. Numerical results are compared with experimental results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.197-204
• /
• 2001

The purpose of this paper is to develope the evaluation technique to find proper elastic constants that characterize the material nonlinearity of structural membrane. The stress-strain curves of membrane material show strong nonlinearity. But generally the analysis is carried out under the assumption on material linear and geometrical nonlinear method. Because, it is very difficult to evaluate proper tangential stiffness. This paper use multi-step-linear approximation method taking the concept of effective stress for the evaluation of stiffness of membrane material, and then compare the results between linear and nonlinear analysis. Also. it shows better results than linear method

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권6호
• /
• pp.239-246
• /
• 2014

Many kinds of membrane have been used for the guided bone regeneration (GBR) technique. However, most membranes do not fulfill all requirements for the ideal membrane for the GBR technique. Among them, collagen membrane has been most widely used. However, its high price and weak tensile strength in wet condition are limitations for wide clinical application. Synthetic polymers have also been used for the GBR technique. Recently, silk based membrane has been considered as a membrane for the GBR technique. Despite many promising preclinical data for use of a silk membrane, clinical data regarding the silk membrane has been limited. However, silk based material has been used clinically as vessel-tie material and an electrospun silk membrane was applied successfully to patients. No adverse effect related to the silk suture has been reported. Considering that silk membrane can be provided to patients at a cheap price, its clinical application should be encouraged.

• 한국공간구조학회논문집
• /
• 제20권3호
• /
• pp.91-98
• /
• 2020

For form stability of membrane structures, membrane material is required to be in tension. Therefore, in planning and maintenance management, the engineer should consider enough about introduction of stress during construction and re-introduction of stress after completion. Clamping part is an important portion with the function for introducing tension into membrane materials, and the function to transmit stress to boundary structures, such as steel frames. Then, the purpose of this research is to clarify stress condition and stress transfer mechanism including clamping part of membrane structures, and to grasp the changing tendency of membrane structures with the passage of time. In this research, following previous one, we perform well-balanced evaluation by conducting tensile fractured tests of clamping part's specimens, and by measuring individually the amount of displacement of not only overall specimen's length but membrane material and clamping part. Thereby, we consider the influence the difference in the hardness of edge rope and the difference in the direction of thread affect modification and fracture load.

• 한국세라믹학회지
• /
• 제38권10호
• /
• pp.876-880
• /
• 2001

The supported and unsupported boehmite ($\gamma$-AlOOH) membranes were prepared using a boehmite sol. The supported membrane was consisted of a porcelain support, two intermediate $\alpha-{Al_2}{O_3}$ layers, and a top boehmite membrane. XRD patterns showed that the supported top membrane had a higher $\theta-$ to $\alpha-{Al_2}{O_3}$ transformation temperature compared to the unsupported membrane. This result was also confirmed from microstructural study of the membrane. The shift in the phase transformation temperature should be explained by difference of a stress generated in the supported top membrane due to interaction between the support layers and the top membrane.

• 한국지반신소재학회논문집
• /
• 제17권4호
• /
• pp.93-102
• /
• 2018

차수용 박층 멤브레인은 폴리머로 구성된 재료로 기존 방수포(sheet membrane)를 대체할 수 있는 뿜어 붙이는 방식의 차수 재료이다. 시공에 있어서 뿜어 붙이는 방식을 사용하기 때문에 타설이 용이하고 상대적으로 높은 부착성능을 보인다. 차수용 박층 멤브레인의 배합은 영구 지보재로 쓰이는 TSL(Thin Spray-on Liner)와 매우 유사한 구성을 갖으나 적용 목적에 따라 차수와 지보재로 구분하고 있다. 본 연구에서는 차수용 박층 멤브레인의 차수 성능을 확보한 상태에서 구조적인 성능을 보강할 수 있도록 배합비를 조절하였다. 이를 검토하기 위해, 영구 지보재용 멤브레인 재료에 사용되는 성능 기준에 따라 시험을 수행하고 결과를 검토하였다. 시험결과 본 연구에서 고려한 차수용 박층 멤브레인의 구조적 성능은 영구 지보재로도 사용이 가능한 정도의 성능을 보였다.

• 한국전기전자재료학회논문지
• /
• 제11권4호
• /
• pp.298-305
• /
• 1998

The PVC membrane electrode for measuring perchlorate ion was developed by incorporating various quaternary ammonium sallts. The effect of chemical structure, the content of active material, the kind of plasticizers, and the membrane thickness on the electrode characteristic such as the linear response range and Nernstian slope of the electrode were studied. It was obtained that the effect of the chemical structure of an active material on the electrode characteristics was improved with increasing the alkyl chain length of the quarternary ammonium salts in the ascending order of Aliquat 336P, TOAP, TDAP, and TDDAP. The optimum membrane composition was 9.09wt% of TDDAP, 30.3wt% of PVC, and 60.6wt% of plasticizer(DBP). And the optimum membrane thickness was 0.45mm at this composition. Under the above condition, the linear response range was $10^{-1}~1.2\times10^{-6}$M, and the detection limit was $5.1\times10^{-7}$M with the Nernstian slope of 57mV/decade of activity of perchlorate ion. The electrode potential was stable within the pH range from 4 to 11. The selectivity coefficient was as shown below: $SCN^->I^-NO_3^->Br^->ClO_3^->F^->Cl^->SO_4^{2-}$