• 상하수도학회지
• /
• 제20권1호
• /
• pp.27-34
• /
• 2006

This study was conducted to evaluate the performance of a membrane bioreactor filled with high concentration of powdered activated carbon (HCPAC-MBR) to reduce DBPs at the drinking water treatment. The pilot system was installed after the rapid sand filtration process whose plant was the conventional treatment process. The removal efficiencies of DBPs were measured during pilot operation period of 2 years. HAA and THM removal rates could be maintained around 80~90% without any troubles and then tremendous reduction of HAA and THM reactivity were observed more than 52%. The average removal rate of HAA formation potential (FP) and THM formation potential (FP) were 70.5% and 67.6% respectively. It is clear that the PAC membrane bioreactor is highly applicable for advanced water treatment to control DBPs.

• Journal of Periodontal and Implant Science
• /
• 제34권1호
• /
• pp.149-162
• /
• 2004

This study was performed to evaluate the effect of freeze-dried bone graft on space-making capacity and bone formation in the procedure of guided bone regeneration with titanium reinforced ePTFE membrane. After decortication in the calvaria, GBR procedure was performed on 8 rabbits with titanium reinforced ePTFE membrane filled with human FDBA(Rocky Mountain Tissue Bank,Aurora Co., USA). Decortication was performed to induce the effect of bone forming factor from bone marrow. The animals were sacrificed at 2 weeks, 4 weeks, 8 weeks and 12 weeks after the surgery. Non-decalcified specimens were processed for histologic analysis. πle results of this study were as follows: 1. Titanium reinforced-ePTFE membrane was biocompatable and capable of maintaining the space-making. 2. FDBA particle was surrounded with connective tissues but there was no evidence on new bone formation. 3. FDBA particle resorbed continuously but it remained until 12weeks after the surgery. Within the above results, TR-ePTFE membrane could be used effectively for Guided bone regeneration but It was assumed that FDBA does not appear to contribute to bone formation.

• Journal of Microbiology and Biotechnology
• /
• 제17권2호
• /
• pp.373-377
• /
• 2007

No phosphatidylcholine (PC) was detected in the membrane of Rhodobacter sphaeroides pmtA mutant (PmtAl) lacking phosphatidylethanolamine (PE) N-methyltransferase, whereas PE in the mutant was increased up to the mole % comparable to the combined level of PE and PC of wild type. Neither the fatty acid composition nor the fluidity of membrane was altered by pmtA mutation. Consistently, aerobic and photoheterotrophic growth of PmtAl were not different from wild type. However, PmtAl showed an extended lag phase (15 h) after the growth transition from aerobic to photoheterotrophic conditions, indicating the PC requirement for the efficient formation of intracytoplasmic membrane (ICM). Interestingly, the B800-850 complex of PmtAl was decreased more than twofold in comparison with wild type, whereas the level of the B875 complex comprising the fixed photosynthetic unit was not changed. Since puc expression is not affected by pmtA mutation, PC appears to be required for the proper formation of the B800-850 complex in the ICM of R. sphaeroides.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.237-240
• /
• 2001

In this paper, we have presented processing technique about wet etching for silicon membrane construction formation. In order to make selective etching of backside silicon wafer, we used Si$_3$N$_4$ layer by PECVD(Plasma Enhanced Chemical Vapor Deposition). We have measured the surface thickness in backside silicon wafer after anisortropic wet etching with KOH:distilled water solutions. Through this experiment, we acquired the etching rate for 1.29${\mu}{\textrm}{m}$/min. The average rough of Si-membrane frontside and backside was 0.26${\mu}{\textrm}{m}$, 0.90${\mu}{\textrm}{m}$, respectively.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1991년도 추계 총회 및 학술발표회
• /
• pp.34-35
• /
• 1991

비대칭 다공막은 표피와 다공층으로 되어 있는 것으로 알려져 왔으나 (그림 1-a), 최근에 두 층 사이에 nodule층의 존재가 여러 연구자들에 의하여 알려졌다. (그림 1-b). 그런데 표피층은 겔화에 의해 그리고 다공층은 binodal에 의한 nucleation and growth 기구로 생성된다는 것이 일반화된 이론이나, nodule 층의 생성에 대한 연구는 없었다. Nodule층의 생성기구를 밝히기 위해서 고분자용액을 편의상 세개의 층으로 나누었으며 (그림 2), 알려진 생성 기구에 의하면 첫째 층은 표피 그리고 셋째는 다공층으로 된다. 그런데 둘째층은 상분리 순간의 고분자 농도에 따라 nodule층 혹은 다공층이 되며, 만일 이 순간의 고분자농도가 임계농도 보다 낮으면 nodule층 그리고 높으면 다공층이 생성된다는 새로운 비대칭 다공막의 생성기구를 제안하였다. (그림 3).

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 춘계 총회 및 학술발표회
• /
• pp.34-35
• /
• 1997

The phase inversion is a significant phenomena in the preparation of membranes and wet spinning. In both these processes, a viscous dope solution is precipitated in a nonsolvent bath and a porous structure is formed under certain conditions. Such structure could have been considered as a diffusion controlled process. The membrane formation of the polymer solution includes both phase separation and gelation. We have studied the influence of variables on the final structure and tried to control the porosity and ultrafiltration(UF) performance of the polyacrylonitrile(PAN) and its copolymer.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1991년도 추계 총회 및 학술발표회
• /
• pp.4-8
• /
• 1991

The characterization of pore properties (mean pore size and pore size distribution) of the active layer in a UF membrane is important not only in order to obtain information about the factors affecting pore formation during membrane manufacturing but also to understand deeply the mechanism of solute and solvent transport through pores. Many methods of characterizing quantitatively the pore properties of UF membranes have been suggested in the literature: solvent and gas flow measurement, bubble point determination, electron microscopy, gas adsorption/desorption measurement, rejection measurement etc. But most of these methods involve time-consuming procedures and involve some wellknown problems and uncertainties.

• 폴리머
• /
• 제24권6호
• /
• pp.802-809
• /
• 2000

Poly(L-glutamic acid) (PLGA)와 PVA 블렌드막을 제조한 후, ethanol 수용액중에서 막증의 polypeptide 사슬의 2차구조 전이거동에 미치는 용매조성 및 대이온종의 영향과 알칼리 금속 이온 (Li, na, K, Cs)에 대한 투과특성을 조사하였다. 막중 PLG 알칼리 금속염의 helix 형성거동에 있어 대이온 선택성은 Li>Na>K>Cs의 순으로 관찰되었고, 이와 같은 특이성은 탈용매화 에너지와 정전에너지의 감소에 따른 고분자 하전기와 대이온과의 contact ion-pair 형성에 의한 것으로 설명하였다. 또한 PLGA/PVA 블렌드막의 ethanol 수용액 중에서의 알칼리 금속이온의 투과거동을 살펴보면, ethanol 농도가 점차 증가함에 따라 K, Cs의 경우는 투고도가 증가한, Li, Na의 경우에는 감소하였다. K, Cs 이온의 경우 대이온과 염소이온간의 ion-pair (M$^{+}{\cdot}$Cl$^{-}$)형성에 의한 Donnan배제효과의 감소와 중성염 형태로의 분배량 증가때문인 것으로, Li, Na 이온의 경우 막중의 coil-helix 구조전이에 따른 자유체적의 감소와 고분자 하전기와의 상호작용이 증가하여 확산성이 크게 감소하였기 때문인 것으로 생각된다.

• Journal of Periodontal and Implant Science
• /
• 제29권3호
• /
• pp.469-484
• /
• 1999

The purpose of this study was to evaluate new bone formation following guided bone regeneration by resorbable and nonresorbable membrane. Six adult mongrel dogs were used. The first, second, third, fourth premolars in the mandible of each dog were extracted. Two months after tooth extraction, a buccal dehiscence defect was surgically created on each edentulous area. The experimental sites were divided into three groups according to the treatment modalities ; Group I-a: surgical treatment only ; Group I -b: allogenic decalcified freezed dried bone grafting ; Group II-a : e- PTFE membrane placement only ; Group II-b : allogenic decalcified freezed dried bone grafting and e-PTFE membrane placement ; Group III-a : Vicryl(R) mesh placement only ; Group III-b : allogenic decalcified freezed dried bone grafting and Vicryl(R) mesh placement . The animals were sacrificed at 8 weeks after operation and the specimens were prepared for histologic and histometric examination. The results were as follows : Clinically, all defect sites were healed without exposure of barrier membrane after the eight weeks. In Group I-a, dense connective tissues were impinged in the bony defect area. Well vascularized and fibrous bone marrow indicated that bone formation was still taking place was found. In Group I-b, in areas closer to the periphery, lamellation of the newly formed bone would found. In Group II-a, beneath the e-PTFE membrane a dense layer of connective tissue covering the most external portions of the regenerated tissue was seen. The new bone surfaces were lined with osteoid and osteoblast. In Group II-b, a dense layer of connective tissue covering the most external portions of the regenerated tissue was observed beneath the e-PTFE membrane. A notable amount of alveolar ridge regeneration was seen with new rigdes with well-contoured form. In Group III-a, the new bone surface were lined with osteoid and osteoblast, indicating active bone formation. A clear demarcation could not be noted between the host bone and new bone. In Group III-b, a notable amount of alveolar ridge regeneration was seen with new ridges assuming wellcontoured form. In areas closer to the periphery, lamellation of the newly formed bone would found. As histometric examination, the amount of bone formation was gained from $12.8mm^2$ to $26.3mm^2$. It was significantly greater in group II-b and group III-b compared to other groups(p<0.05) . These results suggest that Vicryl(R) mesh after DFDB grafting used in guided bone regeneration could create and sustain sufficient space for new bone formation.

• Membrane and Water Treatment
• /
• 제8권6호
• /
• pp.543-551
• /
• 2017

Membrane fouling in membrane bioreactor (MBR) remains a primary challenge for its wider application. The focus of this study to investigate the influence of iron distribution in activated sludge on gel layer fouling in MBR. Significant reduction in the transmembrane pressure (TMP) rise rates was observed in the presence of iron as result of retarding the gel layer formation time. The spatial distribution of iron had a significant impact on the stratification structure of extracellular polymeric substances (EPS) fractions, such as proteins (PN) and polysaccharides (PS). A mitigation of PN or PS from the supernatant to the EPS inner layers was observed in the presence of iron. Compared with the control reactor, the reduction in PN and PS of the supernatant and lower PN/PS rates of the LB-EPS were beneficial to decrease the membrane fouling potential during the gel layer formation. Consequently, the iron addition managed to control gel layer fouling could be a useful strategy in MBR.