• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.544-552
• /
• 2009

This paper presents a novel spring pressure contact interconnect technique for medium power integrated power electronics modules (IPEMs). The key technology of this interconnection is a spring which is made from Be-Cu alloy. By means of the string pressure contact, sufficient press-contact force and good electrical interconnection can be achieved. Another important advantage is that the spring exhibits excellent performance in enduring thermo-mechanical stress. In terms of manufacture procedure, it is also comparatively simple. A 4 kW half-bridge power inverter module is fabricated to demonstrate the performance of the proposed pressure contact technique. Electrical, thermal and mechanical test results of the packaged device are reported. The results of both the simulation and experiment have proven that a good performance can be achieved by the proposed pressure contact technique for the medium power IPEMs.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2076-2084
• /
• 2016

In this paper, a novel scheme to eliminate common-mode voltage (CMV) is proposed for three-level neutral-point clamped (NPC) inverters. In the proposed scheme, a low-power full-bridge converter is utilized to produce compensatory voltage for CMV, which is injected into an NPC inverter through a single-phase four-winding transformer. With the proposed circuit, the power range for applications is not limited, and the maximum modulation index of the inverter is not reduced. These features are suitable for high-power medium-voltage machine drives. The effectiveness of the proposed method is verified by simulation and experimental results.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.750-759
• /
• 2011

This paper focuses on the control of bidirectional power flow in the electric shipboard power systems, especially in the Medium-Voltage Direct Current (MVDC) shipboard power system. Bidirectional power control between the main MVDC bus and the local zones can improve the energy efficiency and control flexibility of electric ship systems. However, since the MVDC system contains various nonlinear loads such as pulsed power load and radar in various subsystems, the voltage of the MVDC and the local zones varies significantly. This voltage variation affects the control performance of the bidirectional DC-DC converters as exogenous disturbances. To improve the control performance regardless of uncertainties and disturbances, this paper proposes a novel controller design method of the bidirectional DC-DC converters using $L_1$ control theory and intelligent optimization algorithm. The performance of the proposed method is verified via large-scale real-time digital simulation of a notional shipboard MVDC power system.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.573-588
• /
• 2009

In this era of knowledge and information of the 21st century, the source of a nation's competitive power consists of human resources and material resources and the importance of human resources appreciates highly. The number of small and medium enterprises which are the core of national economy covers over 98% among whole domestic enterprises of Korea. Competitive power of small and medium enterprises comes from human resources development. For the development of human resources, small and medium enterprises are trying to expand their learning organizations in the company. The analysis of outcomes of administering the existing learning organizations shows that learning organizations contribute highly to the improvement of the productivity of small and medium enterprises. And the analysis also shows that the participants of learning organizations and middle management and executives who support and encourage them recognize the necessity of learning organizations and that it should be disseminated throughout other enterprises. Therefore government's supports to establish learning organizations in a company are required to expand.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.167-179
• /
• 2009

In this era of knowledge and information of the 21st century, the source of a nation's competitive power consists of human resources and material resources and the importance of human resources appreciates highly. The number of small and medium enterprises which are the core of national economy covers over 98% among whole domestic enterprises of Korea. Competitive power of small and medium enterprises comes from human resources development. For the development of human resources, small and medium enterprises are trying to expand their learning organizations in the company. The analysis of outcomes of administering the existing learning organizations shows that learning organizations contribute highly to the improvement of the productivity of small and medium enterprises. And the analysis also shows that the participants of learning organizations and middle management and executives who support and encourage them recognize the necessity of learning organizations and that it should be disseminated throughout other enterprises. Therefore government's supports to establish learning organizations in a company are required to expand.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.6
• /
• pp.409-416
• /
• 2005

For broadband high-data-rate power line communication with the allocated frequency bandwidth from 2 to 30 MHz on medium voltage (MV) distribution power lines, a signal coupling unit is developed. The coupling unit is composed of a coupling capacitor for coupling communication signal, a drain coil, and an impedance matching part. The coupling capacitor made of ceramic capacitor is designed for transmission property of better than 1 dB in the frequency range. The drain coil is used for preventing low frequency high voltage from junction of medium voltage power line in case that a coupling capacitor is not working properly any more. Also, using ferrite core, a novel broadband impedance matching transformer is developed. A complete coupling unit with a coupling capacitor, a drain coil, and a matching transformer is housed by polymer for good isolation and distinguishing from high voltage electric facilities. Each is fabricated and its frequency behavior is tested. Finally, complete signal couplers are equipped in a MV PLC test bed and their performance are measured. The measurement shows that the coupling capacitor works excellently.

• Advances in nano research
• /
• v.15 no.3
• /
• pp.191-201
• /
• 2023

In order to develop better method to enhance and control the flow and heat transfer inside the radiator of electronic device, the synergistic effect of MHD nanofluids and porous medium on the flow and heat transfer in rectangular opened channel is simulated using Lattice Boltzmann method. Three nanofluids of CuO-water, Al₂O₃-water and Fe₃O₄-water are studied to analyze the influence of the type of nanofluid on the synergistic effect. The simulation results show that the porous medium can increase the flow velocity in fluid zone adjacent to the porous medium and enhance the heat transfer on the surface of the channel. Under no magnetic field, when the porosity of porous medium is 0.8, the Nusselt number is 4.46% higher than when the porosity is 0.9. Al₂O₃-water has the best heat transfer effect among the three nanofluids. At Ф=0.06, Ha=100, θ=90°, ε=0.9, Nu of Al₂O₃-water is 6.51% larger than that of CuO-water and 5.05% larger than that of Fe₃O₄-water. Magnetic field enhances seepage in porous medium and inhibits heat transfer in the bottom wall. When Ha=30 and 60, the inhibiting effect is the most significant as the magnetic field angle is 90°. And when Ha=100, the inhibiting effect is the most significant as the magnetic field angle is 120°.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2345-2347
• /
• 2005

In this paper, impedance characteristics of overhead medium-voltage (MV) power lines is reported for power line communication (PLC) over an MV power line network. For analysis, a two-port equivalent network model of MV power lines is derived. By applying the transmission line theory, reflection behavior and impedance of power lines are investigated. For verification, impedance of power lines is measured at a test field for an MV PLC. The results show that impedance of MV power lines is between $200{\Omega}$ and $300{\Omega}$ and converges to a half of their characteristic impedance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.67-78
• /
• 2005

In this paper, impedance characteristics of overhead medium-voltage (MV) power line for power line communication (PLC) is analyzed. For analysis, a two-port equivalent network model of MV power lines is derived. By applying the equivalent model and basic transmission line theory, input impedance at the signal induction part is calculated. And also calculated input impedance of power line itself that the medium voltage coupler and coaxial cable effect are removed. For verification, impedance of power lines is measured at a test field for an MV PLC. The results show that impedance of MV power line itself is between $200\;{\Omega}\;and\;300\;{\Omega}$ and converges to a half of their characteristic impedance with increasing frequency. And also measured data is very similar to calculated data.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2399-2401
• /
• 1998

For a medium/small scale DAS, which using the PCS network as the system communication network, we developed the scheme of communication protocol of DAS between master and remote terminal. This paper presents advanced protocol which has basic frame format and data flow for the medium/small scale DAS, and the procedure of the developing sequence.