• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.555-581
• /
• 2015

Triangular pyramid and Quadrangular pyramid elements for partial double-layer spherical reticulated shells of pyramidal system are investigated in the present study. Macro programs for six typical partial double-layer spherical reticulated shells of pyramidal system are compiled by using the ANSYS Parametric Design Language (APDL). Internal force analysis of six spherical reticulated shells is carried out. Distribution regularity of the stress and displacement are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of partial double-layer spherical reticulated shells of pyramidal system and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization of six spherical reticulated shells is calculated with the span of 30m~120m and rise to span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise to span ratio are discussed with contrast to the results of shape optimization. The optimal combination of main design parameters for six spherical reticulated shells is investigated, i.e., the number of the optimal grids. The results show that: (1) The Kiewitt and Geodesic partial double-layer spherical reticulated shells of triangular pyramidal system should be preferentially adopted in large and medium-span structures. The range of rise to span ratio is from 1/6 to 1/5. (2) The Ribbed and Schwedler partial double-layer spherical reticulated shells of quadrangular pyramidal system should be preferentially adopted in small-span structures. The rise to span ratio should be 1/4. (3) Grids of the six spherical reticulated shells can be optimized after shape optimization and the total steel consumption is optimized to be the least.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.379-387
• /
• 2011

Research and development of LP EGR system for the performance improvement and emission reduction on diesel engine is proceeding at a good pace. LP EGR system seems to be helpful method to further reduce$NO_x$ emissions while maintaining PM emissions at a low level because the boost pressure is unchanged while varying EGR rate. This study is experimentally conducted on a 2.0L common rail DI engine at the medium load condition (2000 rpm, BMEP 1.0 MPa, boost pressure 181.3 kPa) that difficult to use large amount of EGR gas because of deteriorations of performance and fuel consumption. And we investigated the characteristics of performance and fuel consumption while varying EGR systems. The overall results using LP EGR system equipped with ETC identified benefits on reduction of PM and improvement of fuel consumption and thermal efficiency while keep the $NO_x$ level compared to HP EGR and LP EGR with back pressure valve.

• The Korean Journal of Physiology and Pharmacology
• /
• 제3권6호
• /
• pp.571-578
• /
• 1999

This study evaluated the effects of PKC activation using phorbol 12-myristate 13-acetate (PMA) and PKC inhibition using the isoquinoline sulfomide derivative H-7 on hemodynamics and glucoregulation in the isolated perfused rat liver. Livers were isolated from fed male Holtzman rats and perfused with Krebs Ringer bicarbonate solution under a constant flow of 50 ml/min at $35^{\circ}C.$ Portal vein pressure, glucose and lactate concentrations in the medium and oxygen consumption rates were continuously monitored by a Grass polygraph, YSI glucose and lactate monitors, and a YSI oxygen monitor, respectively. PMA at concentration of 2 to 200 nM increased the portal vein pressure, glucose and lactate production, but decreased oxygen consumption rate in a dose-dependent fashion. H-7 $(200\;{\mu}M)$ attenuated PMA (50 nM)-induced vasoconstriction $(15.1{\pm}1.36\;vs\;10.56{\pm}1.17\;mmHg),$ glucose production rate $(91.3{\pm}6.15\;vs\;71.8{\pm}2.50\;{\mu}moles/g/hr),$ lactate production rate $(72.4{\pm}6.82\;vs\;53.6{\pm}4.82\;{\mu}moles/g/hr)$ and oxygen consumption rate $(33.7{\pm}1.41\;vs\;27.9{\pm}1.75\;{\mu}l/g/min).$ The effects of PMA were blocked either by addition of verapamil $(9\;{\mu}M)$ or perfusion with $Ca^{2+}-free$ KRB. These results suggest that the hemodynamic and glucoregulatory changes in the perfused rat liver are mediated by protein kinase C activation and require $Ca^{2+}$ influx from the extracellular fluid.

• Journal of Advanced Navigation Technology
• /
• 제15권1호
• /
• pp.54-60
• /
• 2011

The development of wireless sensor networks (WSN) can be motivated by several types of applications. However, these applications demand an energy-efficient WSN that can prolong the network lifetime and can provide high throughput, low latency and delay. Designing wireless sensor networks with the capability of prolonging network lifetime catch the attention of many researchers in wireless system and network field. Contrasts with Mobile Ad Hoc Network system, Wireless Sensor Networks designs focused more on survivability of each node in the network instead of maximizing data throughput or minimizing end-to-end delay. In this paper, we will study part of data link layer in Open Systems Interconnection (OSI) model, called medium access control (MAC) layer. Since the MAC development of energy aware MAC Protocol for wireless sensor layer controls the physical radio part, it has a large impact on the overall energy consumption and the lifetime of a node. This paper proposes a analytical approach that tries to reduce idle energy consumption, and shows the increasement of network end-to-end arrival rate due to efficiency in energy consumption from time slot management.

• International Journal of Costume and Fashion
• /
• 제7권2호
• /
• pp.1-17
• /
• 2007

The purpose of this study was to identify appearance management behavior related to well-being lifestyle of women. The results of the study were as follows: 1. The factors relating to a well-being lifestyle were personality and value, fashionable appearance, leisure activity, healthy food, brands, social activities, reasonable consumption, environmental protection, and individuality. The factors of appearance management behavior were weight management and skin care, apparel and accessory management, dietary treatment, bathing, make-up and hair styling, underwear management, using hospitals, beauty salons, and identity kits. 2. Women were classified into 4 kinds of groups: well-being, reasonable value pursuit, ostensible consumption, and bad-being. 3. The members of the well-being group were generally married, highly educated, had a high income, and spent a lot of money for their appearance management. They had a high level of appearance management in terms of weight and skincare, apparel and fashion accessories management, dietary treatment, bathing, make-up and hairstyling, underwear management, and in the use of hospitals and beauty salons. The members of the reasonable value pursuit group were generally married, less educated, with a medium income, and spent little for their appearance management. Members of the ostensible consumption group were generally unmarried, with a low income but spent lot of money for sundries and appearance management. They also had a high level of appearance management with regard to weight training and skin care, apparel and fashion accessory management, underwear management, the use of hospitals and beauty salons, and using identity kits. Members of the bad-being group were generally unmarried, had low incomes, little disposable income, spent little on appearance management, and didn't manage their appearance as a whole.

• Korean Journal of Community Nutrition
• /
• 제13권1호
• /
• pp.100-110
• /
• 2008

Recently, a lot of epidemiological studies revealed that low HDL-cholesterol level was a better predictor of risk for coronary heart disease than total cholesterol. This study investigated the anthropometric parameters, clinical blood indices, and dietary factors influencing serum HDL-cholesterol level by using a cross-sectional study for Korean female college students. The subjects were 94 female college students. They were divided into three groups according to their serum HDL-cholesterol levels, low HDL-cholesterol (<50 mg/dL, n=20), medium HDL-cholesterol (50 $\leq$, < 60 mg/dL, n=39) high serum HDL-cholesterol groups (60 $\leq$ mg/dL, n = 35). This study examined their demographic data and dietary intake throughout a questionnaire. Clinical blood indices were measured using an automatic blood chemistry analyzer (Selectra E), after 12 hours of fasting. BMI, body weight, fat mass, and waist circumferences were significantly increased according to low serum HDL-cholesterol levels. Serum lipid analysis showed a significantly higher level of TG, LDL-/HDL-Ratio, atherogenic index in the low HDL-cholesterol group. Serum levels of GPT, uric acid and alkaline phosphatase in the low HDL-cholesterol group were significantly higher than in the other group. The average consumption of energy was 1627 kcal and 77.76% of estimated energy requirement (EER). The mean ratio of calories from carbohydrate: protein: fat was 57:15:28. The low HDL-cholesterol group was significantly higher than the other groups in eggs, fat and oils consumption. Interestingly, milk and diary products consumption of low HDL-cholesterol group was half (p < 0.05) of those of the other groups. In conclusion, serum HDL-cholesterol levels appeared to be decreased by increasing BMI, fat mass, waist circumference, and serum TG level. In addition, some dietary factors seemed to be related to serum HDL-cholesterol levels. However, further research is needed to elucidate the exact relationship between serum HDL-cholesterol level and dietary factors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제33권3B호
• /
• pp.135-143
• /
• 2008

In this paper, we propose a QoS guaranteed and energy-efficient transmission scheme for Wireless Personal Area Networks (WPANs), which operate in conjunction with contention-based access protocols such as CSMA/CA. Energy consumption is one of the most important issues in WPAN systems, because WPAN devices are often required to operate under limited battery capacity. Furthermore, if the WPAN adopts a contention-based medium access protocol, the energy consumption problem becomes even more critical due to the collisions caused by independent channel access trials. Therefore, in this paper, we propose an algorithm that selects the optimum fragment size, modulation level, and transmission power, in order to minimize the energy consumption and guaranteethe QoS (Quality of Service) requirements, simultaneously. Our simulation results show that the proposed algorithm has better performance than the previous ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제34권10A호
• /
• pp.760-768
• /
• 2009

In this paper, we propose the energy efficient transmission parameter selection method for Wireless Personal Area Network (WPAN) system which is applied to e-Navigation system considering various ship models environment. An appropriate selection of transmission parameters of HR-WPAN system is very essential to be considered for saving WPAN devices' energy consumption, when HR-WPAN system is applied to ship area network (SAN). Therefore, we propose an energy consumption model for a ship area network employing IEEE 802.15.3 based CSMA/CA HR-WPAN model and analyze the effect of transmission parameter selection on the performance of energy consumption. In particular, the path loss is the major performance decision parameter for the SAN employing HR-WPAN system, since it varies according to the material of shipbuilding such as steel(for large ship), FRP(for medium size ship) and compound wood(for small ship). Thus, we analyze and demonstrate that the proper transmission parameter selection of transmit power, PHY data rate and fragment size for each ship model could guarantee energy efficiency.

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.389-396
• /
• 2019

The electrical energy consumption (EEC) in removal of NO by a $UV/H_2O_2$ oxidation process was introduced and related to removal efficiency of this gas. The absorption-reaction of NO was conducted in a bubble column reactor in the presence of $SO_2$. The variation in NO removal efficiency was investigated for various process parameters including NO and $SO_2$ inlet concentrations, initial concentration of $H_2O_2$ solution and gas flow rate. EEC values were obtained in these different conditions. The removal efficiency was increased from about 22% to 54.7% when $H_2O_2$ concentration increased from 0.1 to 1.5 M, while EEC decreased by about 70%. However, further increase in $H_2O_2$ concentration, from 1.5 to 2, had no significant effect on NO absorption and EEC. An increase in NO inlet concentration, from 200 to 500 ppm, decreased its removal efficiency by about 10%. However, EEC increased from $2.9{\times}10^{-2}$ to $3.9{\times}10^{-2}kWh/m^3$. Results also revealed that the presence of $SO_2$ had negative effect on NO removal percentage and EEC values. Some experiments were conducted to investigate the effect of $H_2O_2$ solution pH. The changing of pH of oxidation-absorption medium in the ranges between 3 to 10, had positive and negative effects on removal efficiency depending on pH value.

• Journal of computational fluids engineering
• /
• 제19권3호
• /
• pp.24-28
• /
• 2014

With ever rising concerns about saving of fossil fuel resource, there have been an increasing demand for use of energy more efficiently. The electric motor driven inverters can be a great help to improve energy efficiency. They are also used to control the motor speed to the actual need. Therefore the use of them can lead to reduce energy consumption. In particular, the medium voltage(MV) drive systems used for pumps, fans, steel rolling mills and tractions have widespread applications in the industry. They cover power ratings from 0.4MW to 40MW at the MV level of 2.3kV to 13.8kV. The majority of the installed MV drive systems however, are in the 1MW to 4MW range with voltage rating from 3.3kV to 6.6kV. But they are required to reduce size and weight like other power electronic equipments. In this paper, we studied on the 3.3kV(105A) compact rack type inverter system for improving the cooling efficiency. At first, we confirmed the tendency of temperature with computational simulation using ANSYS ICEPAK and actual experimental tests. And then we researched thermal performance improvement designs in order to reduce temperature of the transformer for the safe operation. It can reduce temperature of transformer that using pipe type flow guide in the system. As a result, we found out more efficient solution by thermal-fluid analysis.