• 비파괴검사학회지
• /
• 제20권1호
• /
• pp.18-26
• /
• 2000

화력발전소 보일러 고온배관인 주증기관, 헤드 및 증기드럼 등의 설비들은 장시간동안 고온고압의 가혹한 조건으로 운전됨에 따라 크리프손상에 의해 열화되고 있다. 이들 설비의 크리프손상측정에 적용되는 종래의 비파괴기법인 레프리카법, 전기저항법 및 경도법 등은 복잡한 측정절차 및 접근성, 검사결과의 신뢰도 및 측정정도 등 여러가지면에서 단점이 많다. 따라서 본 논문에서는 화력발전소 주요 고온배관에서 발생되는 경년열화인 크리프손상에 대한초음파 측정연구를 수행한 결과로서, 고온배관재료인 Cr-Mo강의 크리프 인공열화재를 대상으로 이들에 대한 크리프손상 상태별 초음과 음속(sound velocity) 및 감쇠(attenuation)의 초음파 신호특성을 평가하였다.

• 한국약용작물학회지
• /
• 제19권6호
• /
• pp.441-445
• /
• 2011

This research was conducted to investigate the influence of variouis organic substrates on growth and yield of organically grown ginseng seedlings in a shaded plastic house. In the investigation of optimal substrate, the eight substrate were formulated by adjusting blending rate of peatmoss, perlite, coir dust(coco peat), and vermiculite. Then, the changes in physico chemical properties of root substrates as well as their influences on the growth characteristics and yield were determined at six months after sowing. The elevation of the blending rate of peatmoss from 50% to 70% with decrease in the rate of inorganic component (mixture of perlite and vermiculite) from 50 to 30% resulted in the increase in container capacities and decrease in total porosities and air-filled capacities. The concentrations of $NH_4-N$, $P_2O_5$ and K increased as the incorporation rate of castor seed meal, phosphate ore, and langbenite, respectively, were elevated during the root medium formulations. The PPV-1 and PPV-4 substrates produced high stem length, stem diameter, shoot fresh weight, leaf area and root length among eight substrate. Root fresh weight was heaviest in PPV-4 compound nursery media. The results of this experiment will be utilized in the new substrate application for ginseng organic culture in shaded vinyl house.

• Journal of Microbiology
• /
• 제40권4호
• /
• pp.305-312
• /
• 2002

The effects of two natural polyamines (putrescine and spermidine) on the synthesis of ArcA, a response regulator of the Arc two-component signal transduction system, were studied using an E. coli mutant deficient in polyamine biosynthesis. Endogenous polyamine deficiency of the mutant resulted in marked reduction in the ArcA level determined by Western blot analysis. Putrescine supplement to the growth medium effectively increased the ArcA level of the mutant in a concentration-dependent manner. Spermidine also stimulated the ArcA level in the mutant to a greater degree than putrescine. Expression of arcA'::lacZ operon fusion in the mutant was stimulated 6-fold and 10-fold by putrescine and spermidine at a 1mM concentration, respectively, indicating that the stimulatory effect of the polyamines on ArcA synthesis is due to transcriptional induction, and that spermidine is a more potent arcA inducer than putrescine. The polyamine-dependent arcA'::lacZ induction was growth-phase-dependent and independent of either arcA or fnr which are two regulators involved in anaerobic stimulation of the Arch level. These results suggested that putrescine and spermidine polyamines may be potential intracellular signal molecules in the control of arcA expression, and thereby may play an important role in cellular metabolism.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1627-1627
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M^{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima t and the variation of full width at half maximum w were strongly dependent on the detection position and the wavelength of the laser beam. At, t and w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1626-1626
• /
• 2001

In this study, a newly constructed optical measurement system, whose main components were a parametric tunable laser and a near infrared photoelectric multiplier, was applied to detection of the information for the inside of Satsuma mandarin using time-of-flight near infrared spectroscopy (TOF-NIRS). The combined effects on the time resolved profile of sample diameter, sugar content, the wavelength of the laser beam, and the detection position of transmitted light were investigated in detail. The samples used were Satsuma mandarin (Citrus unshu $M_{ARC}$.) (location: Wakayama, Japan) having the diameters of 50-84 mm. The sugar content measured by a refractometer varied from 9.9 to 16.3 Brix%. Equator of sample was irradiated vertically with the pulsed laser, and transmitted output power was measured on the restricted position of the equator using the optical fiber cable. The sampling time and the number of averaging the output power were 100 ns and 100 times, respectively. The variation of the attenuance of peak maxima At, the time delay of peak maxima $\Delta$t and the variation of full width at half maximum Δw were strongly dependent on the detection position and the wavelength of the laser beam. At, $\Delta$t and $\Delta$w increased gradually as the sample diameter increased to be much absorbed and vigorously scattered. On the other hand, each optical parameter had a tendency to increase as the sugar content increased. Such behavior was remarkable when the transmitted light was detected at the side face of a sample. When we apply TOF-NIRS to detection of the information for the inside of fruit with high moisture content like Satsuma mandarin, it is very important to give attention to the difference in the scattered light within tissues and the semi-straightly propagated light. Furthermore, we tried to express the resulting phenomena by using a model samples composed of water, sucrose, and milk. The variation of the time resolved profile is strongly governed by the combination of the light absorption component, scattering medium, and refractive index.

• Industrial Engineering and Management Systems
• /
• 제10권2호
• /
• pp.104-108
• /
• 2011

Technology is one of the major competitive advantages for small and medium enterprises (SME), especially ones operating in the manufacturing sector. Increasing technological capabilities is the basis for SME's business performance improvement. The main problem of SME's is a limitation in the areas of production facilities, technology, and human resources. Some of these constraints cause a decline in business performance and competitiveness of SME's. In this case analysis of technology components has to be carried out to determine the effect of technology on SME's business performance improvement. This study aims to measure the components of technology and to analyze the influence of each technology component on business performance of rattan processing SME's in South Kalimantan. The assessment is carried out on the technoware, humanware, inforware, and orgaware components using the technometric method (UNESCAP). Business performance is measured through a combination of financial and non-financial aspects deducted from financial and marketing figures. Analysis of the influence of technology components on business performance of SME's is done using the Structural Equation Model (SEM) with Partial Least Square software (PLS). Data is collected through interviews and questionnaires from 21 rattan processing SME's in South Kalimantan that produce rattan furnitures. The results show that the value of the contribution of technology (TCC) to the performance of rattan processing SME's in South Kalimantan is still quite low. Analysis of the results shows a direct influence of technoware and humanware on business performance, while orgaware influences business performance indirectly through humanware.

• 보건교육건강증진학회지
• /
• 제15권2호
• /
• pp.1-21
• /
• 1998

The industrial health education is the most fundamental and active area in the industrial health. It has become increasingly recognized as an important component of preventive occupational health programs and is an essential service for improvement of productivity and employee's health. Evaluating the worker's health status is a part of the occupational health promotion policy and is very important to know the efficiency of the occupational health service. In this point, the purpose of this study was to clarify the effect of the industrial health education on worker's health status. This study included a survey of 625 workers at 28 factories in Puchon area form August Z7 to September 30, 1996. The research was carried out through the analysis of the self-administered questionnaires and health examination records. The results were as follows: 1. For demographic characteristics, 66.5% of the respondents were male. The most prevalent age group was 30 - 39years group(30.4%). Those who graduated from high school were 43.5%. The workers whose monthly income ranged from 600,000 to 100,000 won were 40.3%. As for the marital status, 69.4% of the respondents were married. 2. For occupational characteristics, 37.9% of the workers had worked 2 to 5 years in the factories, 69.4% of the respondents worked at the assembly line and the staffs were 27.0%. T26.4% of the respondents worked at hazardous workplace and 71.8% of the workers worked 9 to 10 hours a day. Those who worked during the night were 56.0%. Those who felt much for them workload were 29.9% and were dissatisfied with their working environment and job were 33.6%, 19.1%. 3. The 39.4% of the respondents received the industrial health education and most of them received on the safety and only few on family health. 70.7% out of those who had industrial health education reported it helped their health management.

• 한국정보통신학회논문지
• /
• 제20권5호
• /
• pp.1040-1048
• /
• 2016

최근 전투 시스템의 신뢰도를 분석하는 것에 대한 연구가 활발하게 진행되고 있으며, 특히 선행 연구의 한계점을 보완하기 위한 연구와 보다 통합적인 분석에 관한 연구의 필요성이 강조되고 있다. 본 논문에서는 선행 연구에서 분석된 전면과 측면의 피격 확률을 활용하여 시간-효율성을 향상시키기 위한 통합 피격 확률 도출 기법을 제안한다. 또한 도출된 통합 피격 확률을 기반으로 각 구성 요소의 신뢰도를 구하고, 전체 전투 시스템의 기능별 신뢰도를 분석하기 위하여 RBD 기법을 적용하는 방법을 제안한다. 전차 모델에 적용하여 신뢰도 분석을 수행하였으며, 이를 통해 제안하는 방법의 유용성을 검증하였다. 제안하는 방법은 선행 연구에서는 고려되지 않았던 승무원까지도 고려하며, 분석된 기능별 신뢰도는 선행 연구 대비 분석의 정확도 및 시간-효율성을 향상시킬 수 있을 것으로 기대된다.

• 한국군사과학기술학회지
• /
• 제23권6호
• /
• pp.554-564
• /
• 2020

In environment of torpedo firing, underwater acoustic signal is generated by target and noise. Sound wave which is generated from acoustic signal is propagated by seawater and it is received through the sonar(sound navigation and ranging) system mounted on torpedo. In the ocean, acoustic signal or sound wave from target that is generated by the spread of broadband can be attenuated by ambient noise and can be lost by medium and environment. This research is designed to support teamwork training in Naval operations by constructing a simulation system that is more similar to the real-world conditions. This paper attempts to research the modeling of target detection and to develop the simulation of torpedo sonar(TOSO). In order to develop the realistic simulation, we researched the broadband sound modeling of target and noise source, the modeling of acoustic transmission loss by chemical component of seawater, and the modeling of signal attenuation by ambient noise environment which is approximated by experimental measurements in seawater surrounding the Korea Peninsular and by experience of Navy's actual torpedo firing. This research contributed to constructing more practical simulation of torpedo firing in real time and the results of this research were used to develop a teamwork training system for the Navy and their education.

• Journal of Plant Biotechnology
• /
• 제31권3호
• /
• pp.191-195
• /
• 2004

복합스트레스 내성 유전자 NDP kinase 2 유전자를 도입시킨 형질전환 감자를 개발하기 위하여 이 유전자를 산화스트레스에 의해 발현이 강하게 유도되는 SWPA2 프로모터 또는 enhanced CaMV 35S 프로모터에 연결한 벡터를 제작한 후 각각 Agrobacterium 매개로 형질전환 하였다. 기관발생 경로에 의해 kanamycin 저항성 식물체를 재분화 시킨 후 Southern 분석으로 외래 유전자가 안정적으로 감자 게놈내로 삽입되었음을 확인하였다. 형질전환 감자 식물체의 잎 조직을 대상으로 10 $\mu$M methyl viologen에 대한 내성 검정을 조사하여 산화스트레스 내성 형질전환 감자 식물체를 2 개체씩 선발하였다. 선발된 식물체는 건조, 고온 등의 여러 가지 환경스트레스 내성 분석을 실시할 예정이며 이로부터 복합재해에 내성을 지닌 감자 품종을 개발할 수 있을 것으로 기대한다.