• Journal of Bio-Environment Control
• /
• v.15 no.2
• /
• pp.196-203
• /
• 2006

Objective of this research was to determine the effect of application level of fused superphosphate (FSPP) in root media containing granular micronutrient fertilizers (MF) on growth of marigold 'Orange boy' in plug culture. To achieve this, three granular micronutrient mixes such as MF 1, MF 2, and MF 3 were produced and incorporated into three root media, peatmoss+composted pine bark (1:1, v/v, PB), peatmoss+composted rice-hull (1:1, v/v, PR), and peatmoss+composted saw-dust (1:1, v/v, PS), at a rate of $0.3g{\cdot}L^{-1}$. Elevated application level of FSPP in PS medium containing each of MF resulted in increase of plant growth such as plant height, plant width, stem diameter, fresh weight and dry weight at 35days after sowing. The dry weight in the treatment of MF 1, MF 2, MF 3, and control fertilized with $9.0g{\cdot}L^{-1}$ of FSPP were 0.066g, 0.103g, 0.077g, and 0.095g per plant, respectively. These results indicated that each of MF affected marigold plug seedlings differently. The application level of FSPP resulted in the heaviest fresh and dry weight in PR medium were $9.0g{\cdot}L^{-1}$ in MF 1, $3.0g{\cdot}L^{-1}$ in MF 2, $9.0g{\cdot}L^{-1}$ in MF 3, and $6.0g{\cdot}L^{-1}$ in control. Elevated application level of FSPP in PB medium containing each of the micronutrient mix increased fresh and dry weight. The general trends in response of plant growth to elevated FSPP were linear and quadratic. The dry weight in the treatment of MF 1, MF 2, MF 3, and control fertilized with $9.0g{\cdot}L^{-1}$ of FSPP in PB medium were 0.131g, 0.104g, 0.137g, and 0.111g per plant at 35days after sowing. These results indicated that MF 1 and MF 3 performed better than MF 2 and control treatments in growth of marigold plug seedlings.

• Journal of Mushroom
• /
• v.10 no.2
• /
• pp.63-67
• /
• 2012

This study of afterripening conditions during oyster mushroom (Suhanneutari 1ho) cultivation in bottles was investigated. Medium materials were used poplar-sawdust (68%), cotton seed peel (16%), Beet pulp (8%) and cotton seed cake (8%). Mix of materials was used as a percentage of the volume and to adjust moisture content (67%). Autoclaved mediums were placed in low temperature storage ($20^{\circ}C$) and then moved in inoculation room and conducted mechanical inoculation. Mycelial culture temperature was maintained at $20{\sim}21^{\circ}C$ and cultured during 18 days. The afterripening period were 6days, 9days, 12days and 15 days at $25{\sim}27^{\circ}C$. The yield of fruit body was higher for 9 days (163.1g/bottle) and 12 days (160.7g/bottle) than that of other afterripening period. Second, in the changes in moisture content of the medium according to the afterripening period, no significant changes were observed during mycelial grwoth. The longer afterripening period was showed slightly lower weight of media. The moisture content of media after harvest at afterripening for 9 days had the biggest reduction than any other treatments. In addition, weight of media and yield of afterripening for 9 days were the lowest and highest, respectively.

• Geomechanics and Engineering
• /
• v.8 no.6
• /
• pp.859-872
• /
• 2015

Pebble matrix filtration (PMF) is a water treatment technology that can remove suspended solids in highly turbid surface water during heavy storms. PMF typically uses sand and natural pebbles as filter media. Hand-made clay pebbles (balls) can be used as alternatives to natural pebbles in PMF treatment plants, where natural pebbles are not readily available. Since the high turbidity is a seasonal problem that occurs during heavy rains, the use of newly developed composite clay balls instead of pure clay balls have the advantage of removing other pollutants such as natural organic matter (NOM) during other times. Only the strength properties of composite clay balls are described here as the pollutant removal is beyond the scope of this paper. These new composite clay balls must be able to withstand dead and live loads under dry and saturated conditions in a filter assembly. Absence of a standard ball preparation process and expected strength properties of composite clay balls were the main reasons behind the present study. Five different raw materials from industry wastes: Red Mud (RM), Water Treatment Alum Sludge (S), Shredded Paper (SP), Saw Dust (SD), and Sugar Mulch (SM) were added to common clay brick mix (BM) in different proportions. In an effort to minimize costs, in this study clay balls were fired to $1100^{\circ}C$ at a local brick factory together with their bricks. A comprehensive experimental program was performed to evaluate crushing strength of composite hand-made clay balls, using uniaxial compression test to establish the best material combination on the basis of strength properties for designing sustainable filter media for water treatment plants. Performance at both construction and operating stages were considered by analyzing both strength properties under fully dry conditions and strength degradation after saturation in a water bath. The BM-75% as the main component produced optimum combination in terms of workability and strength. With the material combination of BM-75% and additives-25%, the use of Red Mud and water treatment sludge as additives produced the highest and lowest strength of composite clay balls, with a failure load of 5.4 kN and 1.4 kN respectively. However, this lower value of 1.4 kN is much higher than the effective load on each clay ball of 0.04 kN in a typical filter assembly (safety factor of 35), therefore, can still be used as a suitable filter material for enhanced pollutant removal.

• Environmental and Resource Economics Review
• /
• v.18 no.4
• /
• pp.653-693
• /
• 2009

Using the Korean environmental input output analysis, this paper provides the emission intensities of the chemicals, especially, the toxic and carcinogenic substances, by linking the structure of demand, and the policy mix to abate these substances emissions. Acording to the results, Industries with the highest total emission intensities(TEI) of toxic substances are ranked : Printing and reproduction of recorded media(21), Other transportation equipment(26), Pulp and paper(11), Leather and fur products(9), Fiber yarn and fabrics(7). And the highest TEI of carcinogenic substances are Wood and wooden products(10), Motor vehicles and parts(25), Plastic and rubber products(15), Audio, video and communications equipment(23), etc.. The economic factors of changing these emissions are emission intensities and final demands. The effective combinations of policy instruments to abate these emissions are varied by the industries and substances. For example, Government need to execute the effective TEI management in the Fiber yarn and fabrics(7) sector, and, in furniture(27) sector, the reduction of final demand is more effective.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.207-212
• /
• 2012

The objective of the present study is to identify the physico-chemical characteristics of used plug media (UPM) and its effect on growth response of tomato and cucumber seedlings. The UPM from commercial media Mix#5 (Sungro co., Ltd.) was used in this study. This media was sterilized by sterilizer at $120^{\circ}C$ in 30 minutes at 1.5 atm. Physicochemical properties of UPM was compared with new plug media (NPM). Physical properties such as air volume, particle density, solid volume, bulk density were investigated by three phase device (DIK-1130, Japan). And chemical characteristics such as $NO_3$-N, $P_2O_5$, K, Mg, Ca, $SiO_2$, CEC, OM were investigated by soil spectrophotometer (PTIZEN 1412SA, Mecasys Co., Ltd). The result indicates that air volume and water holding capacity of UPM are lower than NPM (25%, 15%, respectively). Bulk density and soil weight are more than two times higher than NPM per unit volume. Compared to NPM, there were no significant different for pH and EC. But CEC of UPM is lower than NPM 40%. In order to compare growth response and ability absorption of inorganic elements by plants, cucumber and tomato seedlings were used and chemical characteristics after growing of mediums were determined. The result indicated that seeding quality of tomato and cucumber in UPM is less than in NPM and almost inorganic ions of UPM are lower than NPM. So it is necessary to improve physicochemical properties of UPM.

• Korean Journal of Plant Resources
• /
• v.6 no.2
• /
• pp.171-179
• /
• 1993

This study was conducted to investigate the effect of growth regulators and medium composition on the growth of each stage in apical meristem culture for mass propagation of Zanthoxylum piperitum var. inerme Makino. The source material, shoot tip segments were taken from three-years old graft trees. Apical meristems were cultured in vitro on basal MS, GD, WS, half strength MS(1/2MS) and half strength GD(1/2GD) media supplemented with various concentrations for growth regulators(BA, IBA) and inorganic nutrients. The results summarized are as follows: 1. In culture establishment stage, ratio of culture establishment was 96.7% and the best resuit was obtained using MS medium supplemented with 1.0mg/l BA and 0.2mg/l IBA. 2. In shoot multitication stage, both shoot multiplication and growth were achieved in average 5.6cm. These results were obtained on in MS medium supplemented with 1.0mg/l BA and 0.2mg/l IBA. 3. In roothing stage, phloroglucinol(PG) acted as IBA synergist in root initiation. The most faverable combinations for root development was half-strength MS medium supplemented with 162mg/l PG and 0.2mg/l IBA, and ratio of rooting was 58.0%. 4. In Vitro formed plantlets were transplanted to paper pots in greenhouse with 85% of relative humidity. 96% of survival rate was obtained from artificial soil mix having same volume of sand, vermiculite, peat, and soil.

• Journal of the Korean Society of Costume
• /
• v.53 no.2
• /
• pp.101-118
• /
• 2003

This paper describes pop stars' fashion style by the changes of pop music from the 1950's of the formative Period of a rock-n-roll to the 1990's. The author could examine the features of pop music as follows : the 1950's rock-n-roll, the 1960's rock and Psychedelic rock. the 1970's punk rock, the 1980's new wave and the 1990's reggae·hip-hop. Based on the examination, the author could do sampling of the fashion style, on which current pop music had influence, by rock style, new wave style, and reggae hip-hop style. The rock style makes appearance again as a new style when it is recently accepted to be a fashion. The 1960's hippie, which contains long-cherished desire of antiwar and peace after September 11, 2001 Attack on America and the Afghan War. reappeared as luxurious hippie, and the hybrid punk has been made because barriers between cultures have been collapsed to mix items and combine contradicting components at fashion field. The new wave style destroys sex difference of clothes. and men's clothes style has introduced women's dress style, so that androgynous style, which has handsome boy image with womanlike hair style and makeup, and the lingerie style without distinction of underwear and outer garment has made appearance through new cloth wearing ways and overexposure. The reggae and hip-hop style makes appearance to overcome social strata, groups, ages, regions and gender, etc and become one of the 21s1 century culture codes. In conclusion, pop music have played very important roles until expansion and popularity of new fashion style, and has been quickly expanded by mass media development. When the pop music fashion styles are introduced to high fashion, fashion styles have become more polished and high-qualify to expand them at main fashion world again.

• Journal of Digital Contents Society
• /
• v.11 no.2
• /
• pp.235-242
• /
• 2010

Differently from instruments which synthesized sounds and tones in the past, voice synthesis engine for music production has reached to the level of creating music as if actual artists were singing. It uses the samples of human voices naturally connected to the different levels of phoneme within the frequency range. Voice synthesis engine is not simply limited to the music production but it is changing cultural paradigm through the second creations of new music type including character music concerts, media productions, albums, and mobile services. Currently, voice synthesis engine technology makes it possible that users input pitch, lyrics, and musical expression parameters through the score editor and they mix and connect voice samples brought from the database to sing. New music types derived from such a development of computer music has sparked a big impact culturally. Accordingly, this paper attempts to examine the specific case studies and the synthesis technologies for users to understand the voice synthesis engine more easily, and it will contribute to their variety of music production.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1145-1152
• /
• 2019

In this paper, a low power current mode 12-bit ADC(: Analog to Digital Converter) is proposed to mix digital circuits and analog circuits with the advantages of low power consumption and high speed operation. The proposed 12 bit ADC is implemented by using 4-bit ADC in a cascade structure, so its power consumption can be reduced, and the chip area can be reduced by using a conversion current mirror circuit. The proposed 12-bit ADC is SK Hynix 350nm process, and post-layout simulation is performed using Cadence MMSIM. It operates at a supply voltage of 3.3V and the area of the proposed circuit is 318㎛ x 514㎛. In addition, the ADC shows the possibility of operating with low power consumption of 3.4mW average power consumption in this paper.

• Cartoon and Animation Studies
• /
• s.12
• /
• pp.27-43
• /
• 2007

The article concerns the continuity and transformation of the cartoon strip for the musical performance. Recently, the cartoon strip has been considered as a resource for creating the musical performance. However, There are a few articles on the relationship of the cartoon strip and the musical performance. In this respect, the article seeks to examine the characteristics of the cartoon strip and the musical performance in terms of planning system, storytelling structure, character formation and marketing strategies. The case on the musical entitled 'The Great Catsby', which is rooted in the cartoon strip entitled 'The Great Catsby', is examined. As a result, on the one hand, the characteristics of the cartoon strip has continuously affected the process of creating the musical performance in terms of storytelling, character formation, stage management and the marketing activities. On the other hand, the musical performance considers the music and sound, the moving image and stage management, performance of the actors as an essential part in comparison with the cartoon strip. In addition, the musical performance simplifies and recontructs the cartoon strip according to the principles of the musical performance.