• 한국가금학회지
• /
• 제21권4호
• /
• pp.277-284
• /
• 1994

The functional properties of mechanically deboned chicken meat(MDCM) from whole carcass, whole carcass without exsanguination, neck without skin, leg hone, and upper back and rib were studied. Also, the effects of adding different levels of gelatin and MDCM to the comminuted meats were investigated. Proximate composition values of MDCM ranged from 54.2 to 68.6% moisture, 14.5 to 19.7% protein, 12.3 to 30.1% fat, and 1.1 to 1.3% ash. The MDCM from leg hone had a higher content of fat, and a lower contents of moisture and protein. The MDCM from neck without skin tended to be opposite to the MDCM from leg hone. The total pigment and myoglobin levels were highest in MDCM from whole carcass without exsanguination such as 3.83 and 0.29 rng /g, and those from the other parts were 1.58~2.93 mg /g and 0. 17~0.31 mg /g, respectively. The emulsifying capacity and water holding capacity were highest in MDCM from neck without skin which contained lower levels of fat, collagen and hydroxyproline, but a higher level of salt soluble protein. The emulsifying capacity of comminuted meat decreased as gelatin content increased. The extractability of hydroxyproline from gelatin showed a higher solubility in acidic solution. The MDCM could he added up to 20% level without detrimentally affecting functional properties of comminuted meats although they had less water holding capacity and cooking loss as the proportion of MDCM increased.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권1호
• /
• pp.115-122
• /
• 2014

This study investigated on the effects of adding mechanically deboned chicken meat (MDCM) hydrolysates on the quality properties of imitation fish paste (IFP) during storage. IFP was prepared from Alaska Pollack, spent laying hens surimi and protein hydrolysates which were enzymatically extracted from MDCM. The study was designed as a $3{\times}4$ factorial design with three MDCM hydrolysate content groups (0%, 0.4%, and 0.8%) and four storage times (0, 2, 4, and 6 weeks). Addition of MDCM hydrolysates increased crude fat content but lowered water content (p<0.05). The breaking force of IFP, an indicator of gel formation, increased in treated groups compared to control (p<0.05). Angiotensin I-converting enzyme (ACE) activity was inhibited and free radical scavenging activity increased with increasing MDCM hydrolysate content (p<0.05). In conclusion, the addition of MDCM to IFP improves gel characteristics. Additionally, protein hydrolysates from MDCM serve as a potential source of ACE inhibiting peptides.

• 한국축산식품학회지
• /
• 제37권5호
• /
• pp.635-645
• /
• 2017

In this study, effect of transglutaminase (TGase) addition on physical, water barrier, optical and mechanical properties of mechanically deboned chicken meat protein (MDCM-P) films was investigated. When TGase was added to the films, the thickness increased, but the solubility decreased. Films treated with TGase exhibited higher water vapor permeability than control film (p<0.05). When TGase concentration increased, the $L^*$ values of films decreased, but $a^*$ and $b^*$ values increased. All films showed very good barrier properties against UV light. The highest tensile strength was obtained in MDCM-P films containing 3% TGase (p<0.05). The elongation at break values increased with the TGase concentration increasing from 1 to 3%, but decreased at higher enzyme concentration (p<0.05). The addition of TGase altered molecular organization and intermolecular interaction in the film matrix. TGase treated films showed smoother and ordered surface structure and homogeneous and compact microstructure. The results indicated that TGase use can be an effective approach in improving the solubility and mechanical properties of MDCM-P films.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권1호
• /
• pp.131-136
• /
• 2004

The effects of salt concentration and heating conditions on the thermal gelation properties of surimi produced from mechanically deboned chicken meat (MDCM) were investigated. Chicken surimi was manufactured by washing (MDCM: 0.5% NaCl=1:4), standing, straining and centrifuging. The fat, water-soluble protein and heme pigment in the MDCM were removed by increasing washing cycles. The compressive force of the chicken surimi increased as the concentration of salt was increased from 0% to 5%. Total gel strength of the surimi measured by texture profile analysis showed a maximum in the range 3-5% NaCl. Microstructural analysis showed that the unfolding network structure of the surimi gel began to appear at NaCl concentrations>2%. The optimum heating condition for gelation was $90^{\circ}C$ for 40 min as this resulted in maximum values for measures of gel strength including compressive force, hardness, fracturability, adhesiveness, springiness, gumminess, chewiness and resilience. Chicken surimi gel formed by cooking at a heating rate of $1^{\circ}C/min$ to $90^{\circ}C$ showed better a texture than gels produced at $1.85^{\circ}C/min$. Our result show that a lower rate of heating improves chicken surimi gelation.

• 한국가금학회지
• /
• 제26권2호
• /
• pp.85-95
• /
• 1999

The mechanically deboned chicken meat(MDCM) has several limits in using for in using for in processed meat products as a main material because of poor color and textural properties, chance of microbial contamination and lipid oxidation. There has been a growing interest all over world in the application of MDCM to the surimi process. The surimi made from MDCM contains a high concentration of myofibrillar protein since this processing involves repeated washing processes with an aqueous solution in order to remove heme pigments, fat and other undesirable substances. The quality of the surimi made from MDCM is affected by various processing factors, such as kinds of wash solution, ion strength, washing cycle, temperature, pH changes, composition, part of muscle, particle size, and rigor state etc. A number of researchers havee investigated the effect of the various washing conditions on the properties of surimi gels. A fuller information of all the factors affecting surimi processing and gel formation by heat-induced gelation has not been known yet.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권12호
• /
• pp.1758-1763
• /
• 2004

This study was carried out to investigate gel forming and degradation properties (suwari and modori phenomena) of chicken surimi from mechanically deboned chicken meat (MDCM) at various setting temperatures and time. Chicken surimi was manufactured by a continuous process including chopping of MDCM, washing with 5% NaCl solution or pure water, standing, straining and centrifuging etc. Total process of washing for the MDCM from chopping to centrifuging was repeated over 3 cycles. Gel from prepared surimi were formed at $90^{\circ}C$ for 30 min after various setting treatments. The textural properties of gels were measured at the temperature ranges of low (10$^{\circ}C$), medium (25$^{\circ}C$ and $30^{\circ}C$) and high (45 to 70$^{\circ}C$). The compressive force (CF), hardness and fracturability of surimi gel at 10$^{\circ}C$ increased as setting time increased, and showed the highest value at 30 h of setting time. The CF and hardness of chicken surimi gel at 25$^{\circ}C$ and 30$^{\circ}C$ showed the highest values at 10 h of setting time. Most of gel strengths including CF, and texture profile analysis (TPA) values showed the highest levels in the range 47.5 to 52.5$^{\circ}C$ (p<0.05). The gel strength at 60$^{\circ}C$ increased slightly at 30 min, but then continued to decrease with longer setting times. There was no increase of gel strength at $70^{\circ}C$, but only a continuous decrease over setting time. In conclusion, suwari (gel setting) and modori (gel degradation) phenomena occur during the gel formation of surimi from MDCM. The temperature range in chicken surimi was 47.5 to 52.5$^{\circ}C$ for suwari and 60 to 70$^{\circ}C$ for modori.

• 한국식품과학회지
• /
• 제13권3호
• /
• pp.171-175
• /
• 1981

국내(國內) 산란(産卵)노계(老鷄)와 브로일러로부터 수동(手動) 및 기계발골(機械拔骨)을 할 때의 수율(收率), 발골육(拔骨肉)의 화학적(化學的) 조성(組性), 기계적(機械的) 특성(特性) 저장성(貯藏性), 미생물수(微生物數) 등을 조사하여 다음과 같은 결과를 얻었다. 1. 수동발골의 경우 35%, 기계발골의 경우 45%의 산육수율(産肉收率)을 보여 1차 수동발골을 거친 후 기계발골을 병행(竝行)할 경우 총 산육량(産肉量)은 도체중(屠體重)의 80%에 이르렀다. 2. 기계발골육(器械拔骨肉)은 수분(水分) 65%, 단백질(蛋白質) 12%, 지방(脂肪) 1.7%, Ca $0.2{\sim}0.4%$로서 수동(手動)발(拔)골육(骨肉)에 비해 수분(水分)과 단백질은 낮고 지방(脂肪), 회분(灰分) 및 Ca은 현저히 높았다. 또한 기계(器械)발(拔)골육(骨肉)의 총색소(色素)함량(含量)은 수동발골역(手動拔骨肉)의 2.5배로서 이는 주로 해모그로빈의 증가에 기인하였다. 3. 기계발골육(機械拔骨肉)의 고기 g당 유화능력(乳化能力)은 수동발골육(手動拔骨肉)의 70%에 불과하였으나 단백질 g당 유화능력은 오히려 더 높았는데 이는 기계발골육(機械拔骨肉)의 염용성(鹽溶性) 단백질(蛋白質)의 구성비(構成比)가 수동발골육(手動拔骨肉)보다 높았기 때문이었다. 4. $-20^{\circ}C$에서 냉동(冷凍)저장(貯藏)하는 동안 기계발골육(機械骨肉)의 TBA값은 4주(週)후부터 급격히 증가하였으며 유화능력(乳化能力)도 4주후부터는 낮아져 기계발골육(機械拔骨肉)의 저장(貯藏)은 4주(週) 이내가 권장되었다. 또한 저장 중의 미생물수(微生物數)는 큰 변화없이 $1.8{\times}10^{6}\;cells/g$으로서 수동발골육(手動拔骨肉)의 미생물수(微生物數)와 큰 차이가 없었다.

• 한국축산식품학회지
• /
• 제41권1호
• /
• pp.16-33
• /
• 2021

To stop hunger, reducing food losses is a potential movement towards saving food. A large portion of these losses could be avoided and reduced through the improved food chain in many countries. Raising awareness on how and where food losses occur will help recovering foods such as meat by identifying solutions and convincing people to implement those solutions. This, in turn, will lead to private and public efforts to recover meat that might be otherwise wasted. After highlighting the importance of food saving benefits and relevant statistics, this paper explains the possible ways to reduce meat loss and waste in abattoirs and presents a framework for prevention according to the estimates of meat losses in Iran meat supply. The current article answers the questions of where do we have the meat loss in Iran and what approaches are most successful in reducing losses in the meat industry. The national average loss and waste in meat production are about 300,000 metric tonnes (about 15%). Many segments and players are involved with this huge amount of losses in the meat value chain, a large portion of these losses could be avoided and reduced by about 25% through using by-products with the mechanization of design and manufacturing. The production amount of mechanically deboned meat (MDM) is 105,091,000 kg, concluding the major waste (88.33%) of total poultry losses. Ensuring appropriate actions by exploiting the full potential of engaged Iranian associations and institutes is considered to reduce the losses.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권12호
• /
• pp.1774-1781
• /
• 2016

The purpose of this study was to evaluate the antioxidative activities of Crab meat analogue prepared with protein hydrolysates obtained from mechanically deboned chicken meat (MDCM) from spent laying hens. 2,2-diphenyl-1-picrylhydrazyl hydrate (DPPH) radical-scavenging activity was increased by adding MDCM hydrolysates during storage, and activity correlated with the concentration of DPPH added up to 6 weeks of storage. Hydroxyl radical-scavenging activity was increased in all analogues containing MDCM hydrolysates. At 0 days of storage, angiotensin I-converting enzyme (ACE)-inhibitory activity was increased by the addition of MDCM hydrolysates. Activity did not correlate after 6 weeks of storage, in which ACE-inhibitory activity was increased with low concentrations of MDCM hydrolysates, but no ACE-inhibitory activity was observed at higher concentrations. The liver-protecting activity of crab meat analogue was shown to be around 60% of the positive control; however, it was not significantly different among the samples during storage. These results support the use of MDCM as a source of health-promoting constituents in crab meat analogue.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권4호
• /
• pp.576-584
• /
• 2018

Objective: This study aimed to develop a value-added product concerning technological and sensory characteristics changes of the use of mechanically deboned poultry meat (MDPM) as meat replacer in lamb and mutton emulsion-type sausages (mortadella). Methods: Sausages were produced with lamb and mutton and with different contents of MDPM. Six treatments, using lamb or mutton and 0%, 30%, and 60% of MDPM in relation to the meat batter, were produced and analyzed for pH, proximal composition, calcium and residual nitrite content, water activity, 2-thiobarbituric acid reactive substances (TBARS), instrumental color and texture profile. The sensory profile of the mortadella's was also evaluated by acceptance test and check-all-that-applies (CATA) analysis. Results: The MDPM addition increased (p<0.05) fat, residual nitrite and calcium content in the all sausage formulations, but mutton sausage had (p<0.05) higher fat and lower moisture content than lamb sausage. The pH, water activity, TBARS index and color was not affected by MDPM additions, while the mutton sausages were significantly redder (higher $a^*$, $C^*$, and lower $h^{\circ}$) and darker (lower $L^*$) than lamb sausages. Adding up to 60% of MDPM reduced (p<0.05) sausages hardness and chewiness. Overall, the meat replacement by MDPM increased the sausages acceptance, but the mutton sausage with 30% of MDPM replacer were the most preferred. Consumers related that pink color, glossy appearance, poultry meat-like taste, soft texture, juicy and greasy mouth feel to all sausages contain MDPM according to CATA analysis. Conclusion: Mutton from culled ewes can be utilized for mortadella production with 30% replacement of lean mutton and fat by MDPM.