• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.171-178
• /
• 2009

A comparative analysis of the hindered amine light stabilizers (HALS) and UV abosrber (UVA) and their respective photostabilizing effect on wood plastic composites (WPCs) are reported in this study. The influence of accelerated weathering on the mechanical properties of the composites and the microscopic morphology of a degraded layer on the cross section and the surface were studied. UV absorbers were more efficient at preventing composite lightening than was UV stabilizer. The amount of whitening decreased with the increase of photostabilizers. With the addition of a UV absorber (Tinuvin360), the tensile modulus and strength of the composites increased slightly. However, the addition of a light stabilizer (Tinuvin770) and a UV absorber decreased the tensile modulus and strength of the composites. After 250 and 500 hr exposure, tensile modulus and strength of the un stabilized and stabilized composites decreased. The tensile strength of UV absorber (Chimassorb81)-stabilized composites was significantly greater than that of control and light stabilizer (Tinuvin770)- and UV absorber (Tinuvin360)-stabilized composites. UV absorber-stabilized samples showed less whitening and photodegradation than control and light stabilizer-stabilized samples.

• Elastomers and Composites
• /
• 제33권3호
• /
• pp.193-200
• /
• 1998

고무소재는 다양한 종류별로 구조에 따라 다른 물성을 갖는 것으로 알려져 있다. 일반적으로 EPDM 고무는 내후성과 내오존성이 뛰어나고 열이나 냉기, 습기의 노출에도 잘 견디는 것으로 밝혀진 바 있다. 한편 crosslinked IIR은 물과 기체투과에 대한 저항성이 큰 것으로 알려져 두가지 성분의 장점을 갖도록 EPDM/crosslinked IIR의 블렌드를 새로운 형태의 소재로 추천할 수 있다. 따라서 본 실험에서는 EPDM과 crosslinked IIR의 블렌드비를 변화시키면서 가교시간과 블렌드후 물리/화학적 특성의 개선을 목표로 하였다. 결과적으로 30wt.%의 crosslinked IIR 조성을 갖는 블렌드소재가 내후성, 내오존성 및 내기체투과 특성이 뛰어나, O-링이나 전기관련 제품에 상업적으로 응용가능한 것으로 판단되었다.

• 폴리머
• /
• 제32권3호
• /
• pp.213-218
• /
• 2008

우리나라 전체 문화재중 약 17%에 해당하는 석조문화재는 대부분 옥외에 있고 시간이 지남에 따라 물리적, 화학적, 기계적, 생물학적인 풍화가 진행되고 있어 표면의 색변화, 균열, 부서짐 등이 발생하게 된다. 이러한 풍화현상을 저지하고 지속적인 형태 유지를 위해 적절한 보존처리가 요구된다. 가압과 감압이 가능한 가압용기를 이용하여 저점도의 아크릴계 단량체인 MMA를 암석에 함침시키고 중합하면 암석의 내부 깊숙이 고분자물질을 충진시킬 수 있다. 그에 따라 암석 구성 물질간의 치밀한 결합이 유지되고 발수성 및 내후성 향상이 기대된다. 본 연구에서는 국내산 화강암 2종을 이용하여 처리 후 수분흡수성, 내화학성, 기계적 성질 등의 변화를 통해 석조문화재에 대한 보존처리 방법으로써 의 가능성을 확인하였다.

• 지질공학
• /
• 제34권1호
• /
• pp.67-105
• /
• 2024

This study compares the quartzites of four quartzite units: The Fagfog Quartzite, Dunga Quartzite (member of the Robang Formation), Pandrang Quartzite (member of the Kalitar Formation) and the Chisapani Quartzite. The analysis shows variations in flakiness and elongation, as the Fagfog Quartzite displays low flakiness whereas the Pandrang and the Chisapani have moderate and the Dunga Quartzite has shown variations. The density values of the four quartzite units remain consistent, indicating uniform physical properties and porosity levels. However, bulk density values differ among the quartzites, suggesting variations in particle arrangement, porosity, and density. Regarding strength measures, the Pandrang and the Chisapani Quartzite have higher strength characteristics as compared to the Fagfog and the Dunga Quartzites. The Pandrang Quartzite has the highest average point load strength index, classifying it as "Extremely Strong". The resistance to impact and crushing forces varies among the quartzites, with lower Aggregate Impact Value (AIV) and Aggregate Crushing Value (ACV) indicating higher strength and durability. Durability tests show that the Fagfog Quartzite has high durability against slaking, with a slight decrease observed after the fifth cycle. The Dunga Quartzite shows varying degrees of weathering, while the Pandrang and the Chisapani Quartzite have minimal weight changes, indicating strong resistance to weathering. Magnesium sulfate soundness tests indicate high durability and resistance to degradation for all four units. The Los Angeles abrasion value (LAAV) tests indicate favorable resistance to abrasion for the majority of the Fagfog, Dunga, and the Pandrang Quartzites samples, while Chisapani Quartzite shows more variability in LAAV values. The Pandrang Quartzite shows a higher proportion of elongated particles but lower flakiness index values as compared to Fagfog and Dunga Quartzites while Chisapani Quartzite stands out with a significantly higher presence of flaky particles and lower elongation index values. Mechanically, the Fagfog and Dunga Quartzite show higher strength and better resistance to abrasion and freeze and thaw. The Pandrang Quartzite shows moderate resistance to crushing and sudden effect, while the Chisapani Quartzite has variable resistance to effect. This comparative study emphasizes the diversity and complexity of quartzite rock types, showing the need for comprehensive characterization and assessment to determine their suitability for specific applications.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2004년도 제20회 발표논문집
• /
• pp.92-100
• /
• 2004

The host rocks of brick-shaped stone pagoda in the Bunhwangsa temple are lots of kinds andesitic rocks, which has gone through mechanical and chemical weathering. As the overall observation, the pagoda is serious damages by air pollutants, and the northeast parts show the much advanced state of turning white, while the southeast parts are heavily cracked in the materials. The rocks of brick-shaped pagoda body are in a relatively stable condition of weathering and damage except for the abrasion and cracks of the corners. The rocks of the pagoda roof suffer from more symptoms including multiple peel-offs, exfoliation, cracks forming round lines, and falling off stone pieces. The pagoda roof rocks are dominated by the thriving leafy lichens and mosses, especially, there are higher plants (selaginella involvens, dandelions) taking root actively between the brick stones and content mortar. There are even light gray precipitates like stalactites between the rocks of the body, In particular, the 1st and 2nd floor in the east side and the body parts in the north side are the most serious. Their major minerals are calcite, gypsum and clay minerals. The rocks of the stylobate and the tabernacle in all the four directions are composed mainly of granitic rocks. The materials consisting of the tabernacles show the severe splits and distortion, which causes the structural instability. The stylobate rocks are heavily contaminated by some weeds with the often marks of inorganic contamination by secondary hydroxides. The central part of the east stylobate has been sinking, while that of the 1st floor west stylobate is protruded nesting a line of cracks. Accordingly, the inside of the tabernacle is always humid with the constant introduction of rainwater. The stone lion standing in the southeast and northeast side are alkali granite, while that in the southwest and northwest lithic tuff. Each of the stone lion also coated with various colored lichens, mosses, algae, bacteria and bryophyte. The external materials of the pagoda have deteriorated the functions of the rocks and made the loss, falling off, and biological contamination even worse due to the surface weathering. Thus it's urgent to come up with scientific restoration and conservation measures through clinical tests.

• 한국지형학회지
• /
• 제19권3호
• /
• pp.23-36
• /
• 2012

본 연구는 그동안 고고학이나 역사학의 관점으로만 바라보았던 지석묘(支石墓)의 입지와 축조방식에 대한 문제를 지형학적 관점으로 고찰하여 지석묘가 입지하게 된 이유 및 특성과 지석묘를 축조하는 방식에 대한 문제를 생각해 보고자 하였다. 이를 위하여 전라남도 화순군 도곡면 효산리와 춘양면 대신리 일대의 유네스코 세계문화유산으로 지정되어 있는 지석묘군(群)을 연구대상으로 선정하였다. 효산리 대신리는 지석묘 상석의 장축방향 및 주변의 자연 암괴와 암편 들의 장축방향이 사면의 방향과 일치하고, tor나 block stream 등을 쉽게 관찰할 수 있다. 토양의 성분은 silt >sand >clay의 순으로 분포하며 silt질이 높은 토양과 angular, sub-angular 수준의 원마도 및 illite를 중심으로 하는 1차 점토광물의 높은 피크와 빈도를 보인다. 사면의 상부에는 단애가 위치하고 사면의 중 하부에 지석묘가 분포하는 바, 상석 및 주변 암석과 토양시료의 규반비, 규철반비, CIA등의 풍화지수를 구하여 살펴본 결과 한랭습윤한 환경에서 동결융해의 반복으로 기계적 풍화가 우세하였으며 화학적 풍화가 진전되지 못한 환경이었음을 파악하였다. 지석묘 축조에 사용된 암석은 solifluction과 같은 mass movement에 의해 사면의 아래로 이동하여 제 위치에 놓여 진 것을 청동기인들이 이용한 것으로 보이며, 지석묘를 축조하는 과정도 사면의 상부에 놓여 진 암괴를 이동하지 않고 암괴의 하부를 파내고 굄돌을 돌려가며 먼저 받친 후, 남은 흙을 파내어 유구를 넣고 막음돌로 막은 후 흙으로 덮은 것으로 추정하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.846-851
• /
• 2003

This study was performed to develop the lightweight polymer concrete using expanded clay and perlite to improve workability, durability and chemical resistance for bottom draining structure under severe condition. This paper was composed of two parts. One is to invest the physical and mechanical properties of lightweight polymer concrete using synthetic lightweight aggregate, the other is to the develop products for bottom draining structure. Physical and mechanical test for lightweight polymer concrete was performed unit weight, compressive and flexural strength, chemical resistance, accelerated weathering test, absorption ratio and optimum mix for lightweight polymer concrete was designed. Also, products for bottom draining structures by optimum mix of lightweight polymer concrete was made draining trench of small size.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.76-78
• /
• 2001

In this paper insulation cover that being used in distribution line have been evaluated for aging characteristics. For evaluating its aging properties, we dismounted a variety of samples, like insulation covers for termination of deadend clamp, bushing, LA, COS and sleeve, in the fields. we performed mechanical properties test, electrical test, weathering test, etc. of these samples. And these samples are compared with virgin sample. Test results shows the bad mechanical strength in some part of samples. Especially, Insulation covers for the bushing terminations have cracks in the surface of samples.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2007년도 춘계학술발표회 논문집
• /
• pp.130-139
• /
• 2007

We have carried out numerical compression experiments to estimate the mechanical properties (Mohr-Coulomb and elastic) of corestone-bearing saprolites in Beolgyo area. The studied saprolite, consisting of mechanically much stronger corestone and weaker matrix, is a weathering product of the Precambrian granitic gneiss in the Youngnam massif. Since the saprolite consists of larger corestones with diameter up to 2m, it is impossible to directly measure the mechanical properties by physical experiments. We have measured the mechanical properties of corestone and matrix from naturally occurring saprolite and have used them as a reference for our numerical model. Then, we mixed each material and carried out biaxial compression tests while varying the volume percentage of corestones from 0 to 57%. We found that both cohesion and internal friction angle increase with the volume percentage of corestones while elastic modulus remains constant. We found the results from numerical experiments are in contradiction to what is known from physical experiments using artificial saprolites. This may be due to a possibility that the sharp and discrete nature of interface between corestone and matrix in physical experiments differs from the gradual interfacial nature in numerical modelling and natural saprolites.

• 한국구조물진단유지관리공학회 논문집
• /
• 제7권3호
• /
• pp.115-124
• /
• 2003

본 연구에서는 공사중 계측 결과와 유지관리 계측 결과를 토대로 다양한 분석방법을 통하여 터널의 변위와 응력 등을 분석하였으며, 지반조건이 비교적 연약한 풍화대를 통과하는 지하철 터널의 거동을 분석하여 터널 라이닝의 역학적 특성을 분석하였다. 공사중 계측결과 상부 및 하부 반단면 굴착 완료시의 계측결과를 단순화하여 터널 굴착시 천단침하가 지표침하와 내공변위보다 크다는 것을 확인하였으며, 천단침하와 천단숏크리트 라이닝응력이 역해석 시에 가장 많이 사용되는 계측항목임을 알 수 있었다. 그리고, 간극수압 분석결과를 통해 배수형 터널에 설계시 적용되고 있는 잔류수압의 타당성을 분석하였다.