• Proceedings of the Korean Nuclear Society Conference
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.979-980
• /
• 2004

A multi-channel mechanical test machine for HANARO was designed and fabricated based on the design criteria of the multi-channel mechanical test machine sustained at the working conditions of $<400{\square}$, 3 W/g of gamma heating rate, $5{\times}10^{20}\;n/cm^2$, neutron flux and maximum load of 200 MPa. The multi-channel mechanical test machine made of 304 stainless steel consisted of four modules. Two of them locate upper part of the machine and the others locate lower part with 90 degree rotation. Each module was evaluated by determine load-displacement curve of zirconium specimen. Thermal insulators were also made by electron spark-machining of pure aluminum which was prepared in a domestic company.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.2049-2057
• /
• 2004

In this study, the combustion characteristics and durability of a diesel engine using emulsified fuel was investigated. Water was used in oil type emulsified fuel. In order to understand the effect of emulsified fuel in a wide range of engine running conditions, D-13 mode was selected as a test condition, and a durability test was included to understand the long-term effect of water. Combustion pressure in a cylinder, exhaust emissions, specific fuel consumption, sound level and maximum torque were measured. NOx and PM were simultaneously reduced and the specific fuel consumption was increased and decreased at low and high loads, respectively. There was no trouble and any damage on the parts of the cylinder during a 500 hour durability test.

• Proceedings of the KWS Conference
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.688-693
• /
• 2002

Adhesive bonding is becoming one of the popular joining techniques in metal industries, since it has some advantages over other techniques such as welding and diffusion bonding, e.g., any dissimilar metals are easily adhesive-bonded together. In this study, the experiments were carried out in order to provide the statistical data with strength evaluation methods: tension, shear and four-point bending tests for thermoplastic epoxy resin based adhesive-bonded metal joints. We should certificate on the probability of the adhesive strength that has the tendency of brittle fracture, the adhesive bonding strength between metals with thermoplastic adhesive has the best probability at four-point bending test. The strength testing method that has higher probability is four-point bending test, shear test and tensile test in order.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.391-396
• /
• 2005

Salt water spray test and salt water immersion test were experimentally conducted in order to investigate the durability of fiber reinforced composites under salt water environment. The specimens were made of glass fabric reinforcement and phenolic resin. Mechanical test was performed to obtain mechanical properties such as tensile properties, flexural properties, and shear properties by varying with exposure times. Also dynamic mechanical test and FTIR were conducted to investigate a change in chemical structure as well as thermal analysis properties such as storage shear modulus, loss shear moduls, and tan ${\delta}$. According to the results, salt water environment has effected on mechanical properties and thermal analysis properties and especially the durability of glass fabric/phenolic composites were severely affected on salt water immersion environment rather than salt water spray environment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제21권12호
• /
• pp.2187-2195
• /
• 1997

A semi-active suspension test system was designed and built for the experimental study. Vehicle parameters were estimated through tests and a quarter-car model was validated by comparing computer simulation results and laboratory test results. Alternative semi-active suspension control laws have been tested using the test system. Modulable damper used in this study is a "reverse" damper with 42 states which is controlled by a stepper motor. Experimental results have shown that semi-active suspensions have potential to improve ride quality of automobiles.tomobiles.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.104-104
• /
• 2000

Among durability tests, the accelerated durability test has been widely used to evaluate the durability of vehicle structure and chassis pans in a shon period of time on the designed road which has severe surface conditions. However it increases the drivers fatigue mainly caused by the severe driving conditions. The drivers difficulty of maintaining constant speed and controlling the steering wheel reduces the reliability of test results. The durability test includes the position and distance sensing system for the recognition of the absolute and relative driving position, the driving control system for the control of whole driving circumstance, the emergency system for responding to system errors. AGVDS (Autonomous Guided Vehicle Driving System) was Proved to facilitate the development of now car projects. Therefore the AGVDS we propose will help make the fundamentals for all future traffic systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제25권10호
• /
• pp.1644-1650
• /
• 2001

Mechanical properties of domestic 374 stainless steel have been evaluated fur membrane material used in LNG storage tank. LNG tank is operated around -162$^{\circ}C$. The temperature of membrane depends on LNG level. Accordingly, the membrane material is deteriorated by variation of liquid pressure and temperature. Tensile test and fatigue life test were performed at room temperature and -l62$^{\circ}C$ per code requirements. Especially the biaxial fatigue life test was conducted with shaped membrane sheet at a thermal strain of $\Delta$T=190$^{\circ}C$ The test results obtained with the domestic 304 stainless steel showed better properties compared to the values required by code.

• Transactions of Materials Processing
• /
• 제13권3호
• /
• pp.242-247
• /
• 2004

Literature review on reliability test method for developing high performance optical/thermofluidic components. Since the miniaturization by the conventional mechanical process is limited to milli-structure, i.e. $10^{-3}m$, new technology for fabricating of mechanical components is needed to match cost, reliability, and integrability criteria of micro-structure. Although numbers of various researches on MEMS/MOEMS devices and components, including material characterization, design and optimization, system validation, etc., the lack of standards and specifications make the researches and developments difficult. For that reason, this paper is intended to propose the methods of reliability test for measuring the mechanical property of optical/ thermofluidic components.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.143-145
• /
• 2005

This paper describes the transmission method of an information using communication networks between RTU(Remote Terminal Unit) and PCU(Protection and Control System) of the DC switchgear for Light Railway Vehicle. Also the test result carried out in the laboratory was represented. In this test, transmission signal waveform, polling time, response time and request/response frame between RTU and PCU were measured. The field test including the measurements of analog signal and status of the digital logic operation of PCU was conducted in Gyeongsan Test Track.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제26권10호
• /
• pp.2089-2095
• /
• 2002

Ceramic/metal composites have many attractive properties and great potential fur applications. Interfacial fracture properties of different layered composites are important in material integrity. Therefore, evaluation of fracture toughness at interface is required in essence. In this study, the mechanical characteristics for interface of ceramic/metal composites were investigated by indentation test of micro-hardness method. Apparent interfacial toughness of TBC system could be determined with a relation between the applied load and the length of the crack formed at the interface by indentation test.