• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.2
• /
• pp.450-457
• /
• 1998

The $Papillon-Lef\`{e}vre$ Syndrome(PLS), a disease with autosomal recessive inheritance, is characterized by diffuse hyperkeratosis of the palms and soles, mostly prepubertal periodontitis and premature loss of primary and permanent dentition. The etiology of the destruction of periodontal tissues has not been completely clarified. In recent years, two main factors are suggested to be responsible for tooth loss ; firstly, the presence of gram negative microorganisms in the periodontal pockets of the patients. The other factor suggested is cellular deficiency in chemotaxic and phagocytic function of neutrophylic granulocytes. Resent data suggestes that mechanical debridement in conjunction with antibiotic therapy may be successful in periodontal management of $Papillon-Lef\`{e}vre$ Syndrome, particularly if administered early. In this study, a $Papillon-Lef\`{e}vre$ Syndrome patient was studied clinically, radiologically, histopathologically and microbiologically. 5 years female patient with gingival swelling and destruction of periodontal structure on the whole dentition were examined and palmar and plantar hyperkeratosis were can be seen. On microbiological analysis, Actinobacillus actino-mycetemcomitans was performed. Concurrently, the children recieved extraction of maxillary anterior teeth and construction of removable prosthetis. The combination of professional oral hygiene care and antibiotic therapy improved the dermatologic and periodontal condition.

• Nuclear Engineering and Technology
• /
• v.38 no.4
• /
• pp.375-382
• /
• 2006

Characterization tests (load vs. displacement curve) are conducted for the springs of Zirconium alloy spacer grids for an advanced LWR fuel assembly. Twofold testing is employed: strap-based and assembly-based tests. The assembly-based test satisfies the in situ boundary conditions of the spring within the grid assembly. The aim of the characterization test via the aforementioned two methods is to establish an appropriate assembly-based test method that fulfills the actual boundary conditions. A characterization test under the spacer grid assembly boundary condition is also conducted to investigate the actual behavior of the spring in the core. The stiffness of the characteristic curve is smaller than that of the strap-wised boundary condition. This phenomenon may cause the strap slit condition. A spacer grid consists of horizontal and vertical straps. The strap slit positions are differentiated from each other. They affords examination of the variation of the external load distribution in the grid spring. Localized legions of high stress and their values are analyzed, as they may be affected by the spring shape. Through a comparison of the results of the test and FE analysis, it is concluded that the present assembly-based analysis model and procedure are reasonably well conducted and can be used for spring characterization in the core. Guidelines for improving the mechanical integrity of the spring are also discussed.

• Archives of Pharmacal Research
• /
• v.26 no.1
• /
• pp.76-82
• /
• 2003

Drug releasing porous poly($\varepsilon$-caprolactone) (PCL)-chitosan matrices were fabricated for bone regenerative therapy. Porous matrices made of biodegradable polymers have been playing a crucial role as bone substitutes and as tissue-engineered scaffolds in bone regenerative therapy. The matrices provided mechanical support for the developing tissue and enhanced tissue formation by releasing active agent in controlled manner. Chitosan was employed to enhance hydrophilicity and biocompatibility of the PCL matrices. PDGF-BB was incorporated into PCL-chitosan matrices to induce enhanced bone regeneration efficacy. PCL-chitosan matrices retained a porous structure with a 100-200 $\mu$m pore diameter that was suitable for cellular migration and osteoid ingrowth. $NaHCO_3$ as a porogen was incorporated 5% ratio to polymer weight to form highly porous scaffolds. PDGF-BB was released from PCL-chitosan matrices maintaining therapeutic concentration for 4 week. High osteoblasts attachment level and proliferation was observed from PCL-chitosan matrices. Scanning electron microscopic examination indicated that cultured osteoblasts showed round form and spread pseudopods after 1 day and showed broad cytoplasmic extension after 14 days. PCL-chitosan matrices promoted bone regeneration and PDGF-BB loaded matrices obtained enhanced bone formation in rat calvarial defect. These results suggested that the PDGF-BB releasing PCL-chitosan porous matrices may be potentially used as tissue engineering scaffolds or bone substitutes with high bone regenerative efficacy.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.68-74
• /
• 2017

Characteristics of dissimilar metal welds between alloy steel ASTM A387 Gr. 91 and carbon steel ASTM A516 Gr.70 made with Flux cored arc welding(FCAW) have been evaluated in terms of microstructure, mechanical strength, chemical analysis by EDS as well as corrosion test. Three heat inputs of 15.0, 22.5, 30.0kJ/cm were employed to make joints of dissimilar metals with E71T-1C wire. Post-weld heat treatment was carried out at $750^{\circ}C$ for 2.5 h. Based on microstructural examination, Intragranular polygonal ferrite and grainboundary ferrite were formed only in first layer of weld metal. Another layers consisted of acicular ferrite and $Widmannst{\ddot{a}}tten$ ferrite. The amount of acicular ferrite was increased with decreasing heat input and layer. Heat affected zone of alloy steel showed the highest hardness due to the formation of tempered martensite and lower bainite. Lower and upper bainite were formed in heat affected zone of carbon steel. Tensile strengths of dissimilar metal welds decreased with increasing heat inputs. Dissimilar metal welds showed a good hot cracking resistance due to the low HCS index below 4. The salt spray test of dissimilar metals welds showed that the weight loss rate by corrosion below 170 hours was decreased with increasing heat inputs due to the increase of the amount of acicular ferrite.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.477-480
• /
• 2008

With an increase of power consumption due to industrial development, the generation of coal ash has been growing tremendously and, accordingly, environmental concern over its disposal and insufficiency in disposal sites have been raised as other issues to be considered. In order to examine the usability of coal ash as an aggregate for concrete, such fundamental information as slump, air contents, mechanical properties and durability of concrete has been secured by way of setting 10, 20 or 30 wt. % of fine aggregate alternative rate of ash and identifying its basic properties at each pond-ash contents. The results of the study indicate that slump and air content heavily depend on the site of generation, and this might greatly influence on the content of fine particles of the ash. It is also shown that its freezing and thawing resistance tends to be relatively lower than that of Plain, which requires comprehensive examination over next few years on the absorptiveness and properties of mixed water of the ash collected from each disposal site.

• Transactions of the Korean hydrogen and new energy society
• /
• v.21 no.3
• /
• pp.193-200
• /
• 2010

Anode off-gas of high temperature fuel cell still contains combustible components such as hydrogen, carbon monoxide and hydrocarbon. In this study, a catalytic combustor has been applied to the high temperature fuel cell so that the combustion of anode-off gas can be boosted up. Since the performance of catalytic combustor directly depends on the combustion catalyst, this study is designed to perform the experimental investigation on the combustion characteristics of the three commercial catalysts with a different composition. Screening tests with three catalysts are preceded before the performance examination since it is necessary to determine the most suitable catalyst for design configuration of the catalytic combustor. The performance analysis shows that methane conversion rate strongly depends on gas hourly space velocity (GHSV) as well as inlet gas temperature. Additionally, the GSHV optimization results show that the optimum GHSV will be in the range between 18,000 $hr^{-1}$ and 36,000 $hr^{-1}$. It is also shown that the minimum inlet temperature of catalytic reaction of methane is from $100^{\circ}C$ to $150^{\circ}C$.

• The Korean Journal of Community Living Science
• /
• v.22 no.4
• /
• pp.615-621
• /
• 2011

This study was conducted to evaluate of the protection efficiency in each part of developed pesticide-proof clothes by repeated washings. We investigated the effect of repeated laundering on mechanical properties of pesticide-proof clothes (not washed vs 5 times washed). We also examined pesticide infiltration rate into the pesticide-proof clothes by repeated laundering. The patches(TCL paper, surface area 50cm2)were attached to the inside of pesticide-proof clothes(head, chest, right upper-arm, right forearm, left thigh, left calf, back) which subjects had dressed in during pesticide spraying. The patches were detached from working clothes after work. For the extraction of pesticide in pesticide-proof clothes, sonication was applied for 30 min with methanol. The gas chromatography/mass spectrometry (GC/MS) was applied to identify the pesticide component. The results of this study are as follows: The force strength, water-vapour resistance and surface wetting resistance of pesticide-proof clothes decreased 5 times more in washed clothes. The concentration of pesticide was the highest in the head area of pesticide-proof clothes. In seven parts of TLC paper attached to the pesticide proof clothes, the concentration of pesticide was higher in the left thigh. The penetration part and concentration of pesticide increased as washing was repeated. Therefore the conclusion which can be drawn from this study is this: protection efficiency of pesticide-proof clothes decrease by repeated washings.

• Corrosion Science and Technology
• /
• v.13 no.1
• /
• pp.15-19
• /
• 2014

Recently, anti-fouling paints which does not include the poison components such as tin(Sn), copper(Cu) have been increasingly developed in order to inhibit the environmental contamination of the sea water. Moreover, the wear ratios of these anti-fouling paints are very important problem to prolong their life time in economical point of view. In this study, five types of anti-fouling paints as self polishing type were investigated on the relationship between their polarization characteristics and wear ratios. It was verified that there was apparently a good relationship between the wear ratio and polarization characteristics, for example, the wear ratio increased with increasing the impedance ratio, and increased or decreased with the corrosion potential shifting in the negative or positive direction respectively. In addition, the wear ratio decreased with decreasing the corrosion current density. Consequently, it is suggested that we can qualitatively expect the wear ratio by only measuring the polarization characteristics. Therefore, before the examination of the wear ratio was actually carried out in the field, the evaluation of polarization property in the laboratory may give a available reference data for their developments.

• Polymer(Korea)
• /
• v.33 no.6
• /
• pp.620-624
• /
• 2009

Biomedical metal implants have been used clinically for replacement, restoration, or improvement of injury bodies based on high mechanical properties, but it has some risks such as the inflammatory, late thrombosis, or restenosis due to the low biocompatibility and toxicity. In various techniques of surface treatment developed to preserve these drawbacks, this study examined the electrospray coating technology with biodegradable poly (lactic-co-glycoic acid) (PLGA) on metal surface. Based on fundamental examination of electrospraying and solution parameters, the surface morphology of coated film was closely related to the boiling point of solvent, in-flight distance, and droplet size. The thickness of polymer film was linearly proportional to the emerged volume. This result exhibits that the polymeric droplets were continuously deposited on the polymer film. Therefore, the electrospray coating technology might be applied into the fabrication of single/multi-layered polymer film in nano-/micro-thickness and the control of the topology for biomedical metal implants including stents.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.1-13
• /
• 2014

Hundertwasser's paintings have the characteristics in his works continue to emerge organical spirals, geometric pattern of squares, mysterious and gorgeous colors. This study by applying them, it has been purposed of expansion of representation outstanding artistic formative knitwear by using yarn of various textured fabrics and leather, felt, beads of the materials. The methods of this study are through the analysis of literature of Hundertwasser's paintings and art world and formative traits. It has been studied the literature of the theoretical background on general examination of knitwear and knit, felting, needle punching techniques. Conclusions from this study are as follows: The first, It could know the organic spirals and geometric square patterns and gorgeous colors of Hundertwasser's paintings are suitable as a decorative and rich motif of knitwear design. The second, It was possible unique and various texture expression of decorative patterns of Hundertwasser's paintings by expressing variety of materials of knit, felt and fabric, leather, beads. The third, It was expressed knitwear of unique texture to express Hundertwasser's image of the painting by using hand knitting, felting, needle punching, patchwork, beading of complex techniques. The forth, It was reflected well Hundertwasser's idea which was affected nature and art nouveau that all production processes are composed of handcraft techniques. It was suitable to express the naturalness of hand knit and not mechanical or artificial image. The fifth, It was analyzed lines and patterns of Hundertwasser's painting. The spiral is simultaneously constituted curve shape and area that square patterns also have devided area.