• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.164-170
• /
• 2011

In this study, silicone rubber filled with environmentally-friendly perlite was prepared by mechanical mixing in order to improve thermal properties, such as heat and fire resistances. We found that the properties of silicone rubber composites depended on perlite concentration by various characterization methods. Thermogravimetric analysis(TGA) indicated that the initial degradation temperature of silicone/perlite composite was higher than that of pristine silicone rubber. The gas torch test showed that the opposite side temperature of composite materials was remarkably low as compared to that of pristine silicone rubber. In addition, the composites containing 5 wt% and 10 wt% of perlite showed remarkable thermal stability at elevated temperatures according to the results of both fireproof furnace tests under the RABT condition and carbonization furnace tests. The images from a scanning electron microscope(SEM) showed the degree of dispersion of perlite in silicone rubber. Finally, it was confirmed that limited oxygen index(LOI) was increased with perlite concentration.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.24-30
• /
• 2014

3-Amino-1,2,4-triazole (ATA) (2.5 and 5.0 phr) was incorporated into a immiscible maleated ethylene propylene diene rubber(mEPDM)/maleated high density polyethylene(mHDPE) (50 wt%/50 wt%) blend by melt mixing. Effects of the ATA on structure, mechanical and rheological properties of the blend was investigated. FT-IR and DMA results revealed that supramolecular hydrogen bonding interactions between the polymer chains occur by reaction of ATA with maleic anhydride grafted onto the component polymers in the blend, which induces the physical crosslinks in the blend. FE-SEM analysis showed that mEPDM forms a dispersed phase in continuous mHDPE matrix, and the blend with the ATA has finer phase morphology as compared to the blend without the ATA. By the addition of ATA in the blend, there were significant increases in tensile strength, modulus and elongation-at-break as well as elastic recoverability. Melt rheology studies revealed that ATA induced substantial increase in storage modulus and complex viscosity of the blend at the melt state.

• Polymer(Korea)
• /
• v.25 no.3
• /
• pp.359-366
• /
• 2001

Isothermal physical aging of a glass fiber/epoxy composite was examined at different aging temperatures ($T_a$) and degrees of conversion (monitored by the glass transition temperature, $T_g$) by means of the TBA torsion pendulum technique. The range of aging temperature was from 10 to $130^{\circ}C$ : the conversion was systematically changed from $T_g$=$76^{\circ}C$ to $T_g$=$177^{\circ}C$ (fully crosslinked). The effect of isothermal physical aging was manifested as perturbations of the modulus and mechanical loss vs. temperature in the vicinity of $T_a$ for all conversions. The rate of isothermal physical aging determined from the change of modulus with aging time at fixed aging temperature decreased and then increased with increasing conversion below T$_{a}$=9$0^{\circ}C$. There exists a superposition in aging rate vs. ($T_g$ -$T_a$) by shifting horizontally and vertically. This implies that the physical aging process is independent of the change of chemical structure as conversion proceeds. It has been found that water absorbed at the aging temperature below $70^{\circ}C$ during isothermal physical aging lowers the apparent aging rate. It is due to the absorbed water molecules forming strong polar interactions with hydroxyl group on network chain and reducing the segmental mobility during the physical aging.g.

• Journal of Chest Surgery
• /
• v.26 no.3
• /
• pp.163-169
• /
• 1993

This is the result of the annual statistic analysis of thoracic and cardiovascular surgical cases in 1992 Korea. Overall 17, 520 cases of surgery [11, 732 cases of thoracic surgery by 54 institutes / 5, 788 cases of cardiovascular surgery by 48 institutes] were done. 1. Tumor [N=2, 532] : Lung was the most frequently involved organ by tumor [54.9%],and the remainders were mediastinum [16.2%] / esophagus [14.8%] / chest wall [11.7%] / tracheobronchus [1.3%] / pleura [1.1%] in order. Of 1, 082 cases of primary lung cancer surgery,the frequency of cell type was squamous [62.6%] / adeno [21.6%] / small cell [7.1%] / large cell [2.7%]. Of 411 cases of mediastinal tumor surgery,the frequency of cell type was neurogenic [28.8%] / thymoma [27.6%] / teratoma [17.7%] / congenital cystic [17.2%]. Of 376 cases of esophageal tumor surgery,primary cancer were the most [85.4%]. 2. Infection [N=3, 157] : Pleura was the most frequently involved organ [59.0%],and the remainders were lung [31.3%] / chest wall [8.6%] / mediastinum [1.1%] in order. 3. Miscellaneous [N=6, 043] : Lung and pleural disease esp. pneumothorax [85.1%] was the most frequent surgical indication. The remainders were chest wall anomaly [3.4%] / benign esophageal disease [3.4%] / diaphragmatic pathology [2.4%] / myasthenia [1.4%] in order. Of 85 cases of thymectomy for myasthenia gravis,thymoma was noted in 58.8%. 1. Congenital heart disease [N=3, 363] : The ratio of noncyanotic to cyanotic heart disease was 3:1. Of 2, 516 cases of noncyanotic heart disease,the frequency of disease entity was VSD [44.1%] / ASD [26.0%] / PDA [19.4%] / PS [3.3%],and that of 847 cases of cyanotic heart disease was TOF [29.4%] / ECD [15.6%] / TGA [9.7%] / DORV [7.6%]. Overall mortalities were 2.1% in noncyanotic and 12.2% in cyanotic heart surgery. 2. Acquired heart disease [N=1, 929] : Of 1, 422 cases of valvular surgery,single mitral pathology was the most frequent candidate [48.0%],and total 1, 574 prosthetic valves which were mainly mechanical [95.6%] were used. Of 376 cases of coronary surgery,triple vessel was the most [35.9%],and the frequency of bypassing grafts was great saphenous vein [52.9%] / internal mammary artery [44.7%] / artificial vessel [2.4%]. Overall mortalities were 3.4% in valvular and 4.5% in coronary surgery. 3. Pericardium,Cardiac tumor,Arrhythmia,Aortic aneurysm,Assist device,and Pacemaker : There were no specific changes compared to previous survey1]. This nation-wide inquiry will be continued and reported annually by KTCS Society.

• Journal of Chest Surgery
• /
• v.31 no.12
• /
• pp.1165-1171
• /
• 1998

Background: All currently available mechanical and bioprosthetic valves are associated with various types of deterioration leading to dysfunction and/or valvular complications. Reoperation on prosthetic heart valves is increasingly under consideration for both clinical and prophylactic indications. This review was conducted to determine the factors affecting the risk of reoperation for prosthetic valve replacement. Material and method: From January 1985 to July 1996, 124 patients underwent reoperation on prosthetic heart valves, and 3 patients had a second valve reoperation. The causes of reoperation were prosthetic valve failure(96 cases, 77.4%), prosthetic valve thrombosis(16 cases, 12.9%), prosthetic valve endocarditis(7 cases, 5.6%) and paravalvular leak(5 cases, 4.1%). This article is based on the analysis of the experience with particular emphasis on the preoperative risks affecting the outcome of the reoperation. Result: Overall hospital mortality rate was 8.9%(11/124). Low cardiac output was the most common cause of death(70.6%). Left ventricular systolic dimension(p=0.001), New York Heart Association functional class IV(p=0.003) and serum creatinine level(p=0.007) were the independent risk factors, but age, sex and cardiothoracic ratio did not have any influence on the operative mortality. Follow-up period was ranged from 3 to 141 months (mean, 50.6 months). A late mortality rate was 1.8%. Conclusion: The surgical risk of reoperation on heart valve prostheses in the advanced NYHA class patients is higher, therefore reoperation is recommended before the hemodynamic impairment become severe.

• Journal of Chest Surgery
• /
• v.51 no.4
• /
• pp.247-253
• /
• 2018

Background: Early extubation after cardiovascular surgery has some clinical advantages, including reduced hospitalization costs. Herein, we review the results of ultra-fast-track (UFT) extubation, which refers to extubation performed on the operating table just after the operation, or within 1-2 hours after surgery, in patients with congenital cardiac disease. Methods: We performed UFT extubation in patients (n=72) with a relatively simple congenital cardiac defect or who underwent a simple operation starting in September 2016. To evaluate the feasibility and effectiveness of our recently introduced UFT extubation strategy, we retrospectively reviewed 195 patients who underwent similar operations for similar diseases from September 2015 to September 2017, including the 1-year periods immediately before and after the introduction of the UFT extubation protocol. Propensity scores were used to assess the effects of UFT extubation on length of stay (LOS) in the intensive care unit (ICU), hospital LOS, and medical costs. Results: After propensity-score matching using logistic regression analysis, 47 patients were matched in each group. The mean ICU LOS ($16.3{\pm}28.6$ [UFT] vs. $28.0{\pm}16.8$ [non-UFT] hours, p=0.018) was significantly shorter in the UFT group. The total medical costs ($182.6{\pm}3.5$ [UFT] vs. $187.1{\pm}55.6$ [non-UFT] ${\times}100,000$ Korean won [KRW], p=0.639) and hospital stay expenses ($48.3{\pm}13.6$ [UFT] vs. $54.8{\pm}29.0$ [non-UFT] ${\times}100,000KRW$, p=0.164) did not significantly differ between the groups. Conclusion: UFT extubation decreased the ICU LOS and mechanical ventilation time, but was not associated with postoperative hospital LOS or medical expenses in patients with simple congenital cardiac disease.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.259-265
• /
• 2006

We measured sputtering yield of RF $O_2-plasma$ treated MgO protective layer for AC-PDP(plasma display panel) using a Focused ion Beam System(FIB). A 10 kV acceleration voltage was applied. The sputtering yield of the untreated sample and the treated sample were 0.33 atoms/ion and 0.20 atoms/ion, respectively. The influence of the plasma-treatment of MgO thin film was characterized by XPS and AFM analysis. We observed that the binding energy of the O 1s spectra, the FWHM of O 1s spectra and the RMS(root-mean-square) of surface roughness decreased to 2.36 eV, 0.6167 eV and 0.32 nm, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.3
• /
• pp.277-288
• /
• 2004

Alkali-silica reaction (ASR) is a chemical reaction between alkalies in cement and chemically unstable aggregates and causes expansion and cracking of concrete. In the Present study, we studied the effects of metakaolin, which is a newly introduced mineral admixture showing excellent pozzolainc reaction property, on the inhibition of ASR. We prepared mortar-bars of various replacement ratios of metakaolin and conducted alkali-silica reactivity test (ASTM C 1260), compressive strength test and flow test. We also carefully analyzed the mineralogical changes in hydrate cement paste by XRD qualitative analysis. The admixing of metakaolin caused quick pozzolanic reaction and hydration reaction that resulted in a rapid decrease in portlandite content of hydrated cement paste. The expansion by ASR was reduced effectively as metakaolin replaced cement greater than 15%. This resulted in that the amounts of available portlandite decreased to less than 10% in cement paste. It is considered that the inhibition of ASR expansion by admixing of metakaolin was resulted by the combined processes that the formation of deleterious alkali-calcium-silicate gel was inhibited and the penetration of alkali solution into concrete was retarded due to the formation of denser, more homogeneous cement paste caused by pozzolanic effect. Higher early strength (7 days) than normal concrete was developed when the replacement ratios of metakaolin were greater than 15%. And also, late strength (28 days) was far higher than normal concrete for the all the replacement ratios of metakaolin. The development patterns of mechanical strength for metakaolin admixed concretes reflect the rapid pozzolanic reaction and hydration properties of metakaolin.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.1
• /
• pp.10-19
• /
• 1992

Mn - Zn Ferrite has physical properties of the high initial permeability, saturation magnetic flux density, and low loss factor as a representative magnetic material of soft ferrites, in addition the mechanical property is excellent as a single crystal. Therefore it is important electronic components and used for VTR Head. Mn - Zn Ferrite single crystals with the diameter 8mm were grown in atmosphere mixed with $O_2$ and Ar gas by the Floating Zone(FZ) method that impurities can not be incorporated to the crystals because of not-using the crucible to put in the melt, and the sharp temperature gradient results from making a focus at one point utilizing the infrared ray emitted from the halogen lamp as a heat source. During the crystal growing, the highest temperature of melting area was maintained to be $1650^{\circ}C$, growth rate and rotation rate were 10 mm/hr, 20 rpm respectively. The phases and the growth directions of crystals were determined from the analysis of X RD patterns, Laue, TEM diffraction patterns and etch pit shapes were observed by the optical microscope through the chemical etching. The corelation of optimum conditions for acquiring the better crystals was found out with the growth rate, the length and diameter of melt at the interface according to the diameter of feed rod, and the patterns of growing interface also studied.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.4
• /
• pp.1-8
• /
• 2014

As cores in multi-core processors are integrated in a single chip, power density increased considerably, resulting in high temperature. For this reason, many research groups have focused on the techniques to solve thermal problems. In general, the approaches using mechanical cooling system or DTM(Dynamic Thermal Management) have been used to reduce the temperature in the microprocessors. However, existing approaches cannot solve thermal problems due to high cost and performance degradation. However, floorplan scheme does not require extra cooling cost and performance degradation. In this paper, we propose the diverse floorplan schemes in order to alleviate the thermal problem caused by the hottest unit in multi-core processors. Simulation results show that the peak temperature can be reduced efficiently when the hottest unit is located near to L2 cache. Compared to baseline floorplan, the peak temperature of core-central and core-edge are decreased by $8.04^{\circ}C$, $8.05^{\circ}C$ on average, respectively.