• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.183-187
• /
• 1996

On the machine measuring system composed of touch trigger probes, a DNC module, a CMM module, an analysis module and a man-machine interface unit was developed. Measuring accuracy is affected by working accuracy of the on the machine measuring system. The working accuracy of the system is due to geometric errors of th machine tool, servo errors of feed drives and positioning errors of probes. In order to compensate for the measuring errors due to the working accuracy, a calibration module was developed. The measuring automation system was realized with the on the machine measuring system and an IBM-PC on the machine center through a RS-232C. It turns the machining machine (CMM). The system is used for dimensional checking of machined components. initial job setup, part identification, identification of machining errors due to deflection and wear of tools. cutter run out, and calibration of machine tools. A horizontal machining center equipped with FANUC OMC wre used for verification of the system. The validity and reliability of the system. The validity and reliability of the system were confirmed through a series of experiments with gage blocks, ring gages, comparison measurement with a commercial CMM, and so on.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.199-200
• /
• 2016

Accurate fire diagnoses are needed to properly repair and strengthen buildings affected by fire. The current diagnosis method of fire takes time and is ineffective. In previous research, Melting point temperature of each sequence to grasp easily the temperature of the concrete up to 200 ~ 600 ℃ was to estimate the temperature by utilizing a different sequence representing material.But In the form of conventional hydrothermal temperature prediction simple measuring device, it is difficult in the future buried in application to the construction site, there is a problem of damage when concrete pouring, and only the extension of life measured by the zinc has a problem does not distinguish between 400 ℃ and 500 ℃. Therefore this study is conducted by utilizing a titanium metal changes the color depending on the temperature to check for the applicability of the simple apparatus for measuring the temperature prediction sequence.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.792-795
• /
• 2005

The guide-ways of precision machine tools are one of important element of machine tools. It has usually a pair of surfaces for constraint of one direction with bearing. In the case of precision machine tools, non-contact bearing such as hydrostatic bearing and aerostatic bearing is adopted usually. In this case, profiles of rails has effect on straightness and the clearance of bearing has effect on stiffness of guide way, which changes to higher if clearance changes to smaller. The clearance is varied along moving table according to relative distance of pair of rails. The relative distance of pair of rail can be divided by three properties. First and second properties are straightness of each pair of rail and bearing pad. And, third is parallelism about pair of rails and pairs of bearing pad. There are several methods for measuring straightness of each surface such as reversal method, sequential two point method, and way straightness. These straightness measuring methods are always acquiring deviation of profile from eliminating linear fitted inclined line and don't have the information of parallelism. Therefore, to get the small clearance for high stiffness, the straightness of rail and bearing pad and parallelism about pair of rails and pair of bearing pads are measured for correction such as regrinding, reassembling and lapping. In this research, new and easy method for measuring parallelism of pair of rails is suggested. Two displacement probe and sensor stage, which is carry on the displacement sensor, are needed. The simulation and experiment was accomplished about pair of horizontal guide way to confirm the measurement of parallelism. And, the third probe is added to measure the straightness of each rails by sequential two point method. From the estimation of combined these two methods, it is confirmed that the profiles of a pairs of rails can be measured.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.1-7
• /
• 2006

A method of the volumetric error measurement and calibration of NC machine tools is studied using an artifact method. In this study, a hole-pate is designed and machined using stainless steel. We tested and applied the hole-plate artifact in a commercial CMM(Coordinate Measuring Machine), after calibration of the hole-plate using a precise CMM. It has been shown that not only the measurement of geometric error components but also the 2D length error calculation in a working volume is available using the hole-pate artifact method. The results of study can also be used in NC machine with touch probe as the same method in CMM.

• 한국컴퓨터정보학회논문지
• /
• 제21권9호
• /
• pp.149-156
• /
• 2016

This paper is concerned with education courses operating practices for basic computer literacy training. In this study, we propose an example for students to effectively measure and evaluate the achievement of defined ability in the performance measurement and analysis, learning objectives and learning outcomes set in operation throughout the course. Through research and development use case presents the tools for teaching method and effective and objective measurement of the related subjects. And based on the results, we propose the possibility of utilizing NCS-based course operation and education certification. In this study, the measurement process is based on the association with the objective of the development and operation, and measurement tools, measuring tools for measuring learning outcomes associated with the curriculum design methods for the measurement and evaluation of the case of the operation of the course units of learning outcomes and the method proposed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.378-381
• /
• 2003

Efficient development of method on a performance evaluation for machine tools has been regarded as the most important work for accuracy and quality enhancement to every user and manufacturer. A evaluation method of accuracy for machine tools has been studied recently according to the rapid increase of interest in precision machine tools. To this point of view, the circular interpolation test of machine tools is recognized as the most useful method to distinguish a dynamic accuracy of NC machine tools by ISO and ANSI/ASME, etc. In this paper, we have studied and developed the form measurement system with grid encoder to analyse the final accuracy of NC machine tools. we have analyzed the servo system error and geometric error of NC machine tools through measuring a dynamic error signal by this system. and then we verified the experimental result and enhanced the reliability by means of comparing the characteristics of the developed system with the kinematic ball-bar system.

• 복식문화연구
• /
• 제21권4호
• /
• pp.535-545
• /
• 2013

The aim of this study was comparing measuring tools for detecting physical comfortness with variation of garment pressure. The measuring tools for detecting physical comfortness were EEG and survey questionnaire. Two low-pressure compressionwears and a commercial compressionwear (girdle) were tested. Results showed that the questionnaire survey well detected suffocation or motion comfortness. But it did not discrete the appropriate tightness of the compressionwears. The results of EEG analysis show that the absolute power of ${\alpha}$-wave value was elevated with the low-pressure compressionwears. It also showed lower stress value. The high-pressure compressionwear presented decreased absolute power of ${\alpha}$-wave value. It showed higher stress value. These results implicate that EEG can appropriatly indicate the change of physical comfortness of compressionwear. The appropriate tightness of compressionwear can be measured with EEG analysis rather than survey questionnaire.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.260-265
• /
• 1994

Efforts have been devoted to developing rapid and accurate methods for measuring the errors of machine tools. The method os measurement and calibration of machine tool errors should be general and efficient. The objective of this study is to show in detail the full sequence from the measurement of errors factors to the verification of the positioning accuracy after compensation for the volumetric error. In this paper, we described the steps in measuring the volumetric error parameters, a general error model composed of error parameters, temperature, and the desired position. The validity of the error calibration methods proposed in this paper was tested using a vertical 3-axis CNC machine with a laser interferometer and a ball bar.

• Child Health Nursing Research
• /
• 제24권1호
• /
• pp.78-90
• /
• 2018

Purpose: The purpose of this study was to evaluate measurement properties of self-report questionnaires measuring the social adjustment for youth after treatment of childhood cancer. Methods: Social adjustment measurement tools were identified through a two-stage systematic review. First, we searched for articles using self-report questionnaires to measure the social adjustment of youth after the treatment of childhood cancer. The appropriate tools were listed and categorized. Second, using methodological filters, we searched 5 electronic databases for articles examining the measurement properties of the tools when used with youth after the treatment of childhood cancer. The quality of these papers was then evaluated using the COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN) checklist. Results: Eight tools were frequently used to measure social adjustment. Eight studies investigated the measurement properties of 4 of these tools. The PedsQL 4.0 and MMQL-AF had moderate to strong evidence in some domains, but the rest of the domains had a lack of evidence. The SF-36 and KIDSCREEN-27 were validated for only a few areas. Conclusion: We found a lack of evidence regarding the measurement properties of these tools. More research is required on the measurement properties of tools for use in this population.

• 한국의상디자인학회지
• /
• 제4권1호
• /
• pp.131-141
• /
• 2002

The present study, first, reviews theoretically previous studies about the concept and quality of services as well as tools to measure the quality. Second, it reviews theoretically previous studies about the concept and quality of special services as well as tools to measure the quality. According to the results of reviewing previous studies on service quality, it is considered that the variance among several researchers concerning the measurements of service quality is affected significantly by factors such as the procedures of data collection and analyses utilized in the studies. In addition, the fact that dimensions are different, or some dimensions are not independent, is highly likely to be based on the unique characteristics of business categories, in addition to research procedures. Accordingly, when measuring service quality in future studies, it may be desirable to adapt measuring tools partially for the characteristics of each service category, and to generalize the adjusted tools over the specific category. Especially studies on the quality of special service have been carried out in limited scope so far. Thus, it is required to develop and refine comprehensive and appropriate criteria and detailed questions to measure the quality of fashion education service. Furthermore, studies are necessary with regard to relations among relevant factors such as customers' satisfaction and perception on education service quality after they experience the services.