• 품질경영학회지
• /
• 제27권2호
• /
• pp.201-217
• /
• 1999

Industrial Measuring Instrument is a general name of equipments or tools for measuring and weighing. Inaccurate measuring instruments produce inferior goods in spite of excellent experts, good materials and wonderful equipments. Three characteristics are important for measuring instruments: choosing the proper instruments for measuring, using them properly and managing them to keep accuracy and precision. The purpose of this thesis is to develope the management standard for effective control of measuring instruments by analysing the problems and the management conditions of 100 PPM certified companies out of the domestic small and medium manufacturing industry, which steadily carry out quality control.

• 한국콘텐츠학회논문지
• /
• 제17권3호
• /
• pp.666-674
• /
• 2017

오늘날 기술융합과 산업융합과 같은 융합이라는 용어는 우리사회에서 중요한 화두중의 하나로 떠오르고 있다. 그러나 이를 체계적으로 정량적인 지표로 측정하려는 시도는 많이 부족한 실정이다. 이에 본 연구에서는 특허자료를 이용하여 산업별융합계수를 측정하고, 융합계수에 기반 하여 어떠한 산업에서 융합이 심화되고 있는지를 분석하는 것을 그 목적으로 한다. 이를 위해 먼저 2011년부터 2015년까지 한국특허청에 출원된 국내특허를 대상으로 하여 산업별융합계수를 측정하였다. 연구결과 연구기간동안 특허가 가장 많이 출원된 산업은 사무용기기 및 컴퓨터제조업, 전기제품제조업, 신호전송 및 통신업 등의 범 ICT산업군 이었으며, 동기간 전체산업의 융합계수는 0.316(239,664/758,446)로 나타났다. 또한 산업융합계수가 가장 높은 산업 순으로는 인조섬유(0.918), 도장(0.597), 석유제품(0.588), 기타화합물(0.567), 섬유제품(0.555), 기타운송장비(0.549), 생산관리(0.532) 등으로 나타났다. 추가로 특허출원건수가 많은 산업중심으로 같은 분석을 실시한 결과 광학기기제조업, 기초화합물제조업, 조립금속산업, 정밀/측정기기제조업, 특수목적용기계제조업분야에서 융합이 활발하게 이루어지고 있으며, 이들 산업들은 주로 사무용기기 및 컴퓨터제조업, 특수목적용기계제조업, 정밀/측정기기제조업과 서로 융합이 이루어지고 있는 것으로 나타나고 있다.

• Physical Therapy Rehabilitation Science
• /
• 제11권2호
• /
• pp.215-223
• /
• 2022

Objective: This study was to resolve the limitations of the experimental environment and to solve the shortcomings of the method of measuring human gait characteristics using optical measuring instruments. Design: A cross-sectional study. Methods: Fifteen healthy adults without a history of orthopedic surgery on the lower extremities for the past 6 months were participated. They were analyzed gait variables using the smart guide and the 3D image analysis at the same time, and their results were compared. Visual-3D was used to calculate the analysis variables. Results: The reliability and validity of the data according to the two measuring instruments were found to be very high; gait speed(0.85), cycle time(0.99), stride time of both feet(0.98, 0.97) stride legnth of both feet(0.86, 0.88) stride per minute of both feet(0.99, 0.96), foot speed of both feet(0.90, 0.91), step time of both feet(0.77, 0.71), step per minute(0.72, 0.74), stance time of both feet(0.96, 0.97), swing time of both feet(0.93, 0.79), double step time(0.81), initial double step time(0.84) and terminal step time(0.76). Conclusions: In the case of the smart insole, which measures human gait variables using the pressure sensor and inertial sensor inserted in the insole, the reliability and validity of the measured data were found to be very high. It can be used as a device to replace 3D image analysis when measuring pathological gait.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2000년도 춘계학술발표논문집
• /
• pp.118-125
• /
• 2000

Gloss uniformity on unprinted coated papers is oftenly called as 'Surface Feeling' in market and roles as a very important criteria when a customer choose a paper. However, there is few researches on this quality so far and even there isn't much knowledge on the characteristics of gloss variation, ie what it is, where it comes from etc. Therefore, there should be a pre-research on its characteristics, factors, measuring method or tools prior to the following development activities. In this paper, we obtained about a dozen of papers including foreign products and measured not only basic properties of them, but also various characteristics related to ununiformity. Our experiments went further to printing, but that area is excluded in this paper. Also, we investigated several instruments for measuring gloss variation by an objective way all over the world and tested with our own samples so that we tried to find out which one is best-correlated with visual appreciation and suggest its results as possible. We found out several things from these experiments including what is difference between good and bad gloss uniformity, the factors of gloss variation, and the results of measurement for gloss variation with instruments.

• 디지털산업정보학회논문지
• /
• 제14권1호
• /
• pp.87-101
• /
• 2018

The purpose of this study is to develop the measuring instruments for evaluation criteria for Malcolm Baldrige National Quality Award(MBNQA), suitable for ICT Industries, and to analyze the cause-effect relationship between those criteria through aforementioned instruments. MBNQA is formed with seven categories: Leadership, Strategic planning, Focus on patients, other customers and markets, Measurement, analysis and knowledge management, Human resource focus, Process management and Results. As excluding the Human Resource Focus category, this study empirically examined the cause-effect relationship among six categories. In order to empirically examine the research model, this study calculated Cronbach's alpha and reliability index, thus examined the reliability and executed Exploratory Factor Analysis. Furthermore, Average Variance Extracted(AVE) is used to verify the discriminant validity. Lastly, the hypothesis testing was made complete through significance test on the paths between variables. The result of this study shows that both leadership and social responsibility have direct cause-effect relationship with Measurement, analysis and knowledge management, Human resource focus, Process management and also that this relationship has direct impact on Human resource focus, Measurement, analysis and knowledge management as well, consequently exerting influence on the result through Process management, Finance and Market data.

• 펄프종이기술
• /
• 제32권5호
• /
• pp.72-79
• /
• 2000

On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard. Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and cockling tendency, and provides the necessary information to fine-tune the manufacturing process for optimum quality. Many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, being beyond the measurement range of the traditional instruments or resulting inconveniently long measuring time per sample. The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, non-leaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layers of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow n well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. Hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly as planned (having even small measurement error or malfunction), the process control will set the machine to operate away from the optimum, resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Asia Pacific Journal of Business Review
• /
• 제3권2호
• /
• pp.67-87
• /
• 2019

Anti-dumping instruments among trading partners have been the subject of research by both academicians and practitioners. This study attempts to establish an early-warning model of anti-dumping against Chinese textile exporting companies, which have suffered from anti-dumping regulations and got arbitration awards. After reviewing theories of anti-dumping arbitration, early-warning and relationship marketing, the measuring items and relationship marketing model of Chinese textiles exporters are investigated. Empirical methods are selected based on early-warning theories of companies. Eighty percent of 156 valid questionnaires by surveys and interviews are used as training data via Binary-Logistic regression while the other twenty percent are validated in the model. As a result, a proper early-warning model has been established.

• 한국지리정보학회지
• /
• 제22권2호
• /
• pp.97-106
• /
• 2019

오늘날 수많은 건설 시설물 중에서 항상 시설하여 관리해야하는 다양한 중대형 교량구조물의 안전상황을 점검하기 위하여 여러 가지의 계측장비를 이용하고 있지만 대부분 일정한 주기별로 교량의 변위거동을 측정하고 확인하는 방법을 사용하고 있다. 지속적으로 안전상황을 점검하기 위하여 여러 가지의 계측장비를 이용하고 있지만 대부분 실시간으로는 주요 시설물의 변위와 거동을 측정하고 상시적으로 확인하지 못하고 있는 것이다. 본 연구에서는 대형 교량구조물의 운행에 위험을 사전에 감지할 수 있도록 GNSS 및 환경센서와 드론영상 데이터를 무선 네트워크로 전송하여 사용할 수 있도록 하였다. 그 결과, 실시간으로 교량의 미세변위와 그 상태를 진단함으로서 위험 요소가 예상되는 교량의 구조부에 대한 보강, 수리 및 재해 방지 조치가 가능하도록 하여, 각종 재난과 사고를 사전에 예방하고 방재할 수 있는 새로운 대안을 제시할 수 있었다.

• 한국의류산업학회지
• /
• 제4권6호
• /
• pp.534-543
• /
• 2002

The purpose of this study was to identify the body proportions of girls in middle and high school who have been a major sales target of clothing manufacturers and thus to provide the basic information on the proportion of human body, which is essential for manufacturer to produce clothing and for individual consumers to select right apparels to wear and purchase. The subjects were 133 girls in middle school and 141 girls in high school. As measuring instruments, the Martin's anthropometer, tapelines, and belts for marking waistline were used. In order to analyze the data, t-test and factor analysis were used. The measurement of vertical distance between vertex and measuring points, showed a significant difference between the high school group and middle school group in every item. In the comparison of eight head proportion between the two groups, middle school students had 7.2 head proportion while girls in high school had 6.9 head proportion in detail. The factor analysis of major divided body parts of the two groups indicated that waist-hip and hip-crotch, constituting lower trunk together, vertex-apex nasi, and apex nasi-back neck point, constituting head together, back neck point-spina scapula and spina scapula-waist, constituting posterior of upper body together, and mentum-bust point and bust point-waist, constituting anterior of upper body together, were in inverse proportion.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.31-40
• /
• 1993

The vibration-proof material normally used in structural components of precision machinery or measuring instruments requires higher damping in vibration and better characteristics in dimensional stability and rigidity to accomplish the quality assurance of the products. In this study the ferrite-resin material, which is the mixture of epoxy resin and the oxidized steel (Fe$_{3}$O$_{4}$: ferrite) in consideration of characteristics of aggregator and binder, is developed and investigated as one of vibration-proof materials. Four kinds of composite plates for experiments are made by adding another filler materials such as steel powder, granite powder and carbon-fiber sheet to the basic ferrite-resin matrix. Their characteristics are compared with a cast iron specimen which has the same bending rigidity as other specimens. The ferrite-resin material gives the best damping effect in the motor-induced vibration test. Therefore, the material can be applied to the manufacturing industry for vibration damping of machine elements.