• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.2
• /
• pp.161-176
• /
• 2010

We examined high ozone episodes observed during the intensive measurement periods (11 May~21 June and 30 July~11 August 2009) in the Gulf of Gwangyang. During that period, there were a few events (or days) in which 1 hr averaged ozone concentrations were greater than 100 ppbv. The analysis of ozone budget and photochemical characteristics related to the ozone production was carried out using a photochemical box model. Ozone sensitivity to $NO_x$ and VOCs was also examined in the study area during the measurement period. Diurnal variation of ozone during the episodes was similar to that of odd hydrogen radicals ($HO_2,CH_3O_2$, and $RO_2$), suggesting significant correlation with photochemical production of ozone during the episodes. In general, ozone concentration in the study area during the measurement period was sensitive to VOCs, whereas ozone was sensitive to $NO_x$ under certain conditions. Ozone sensitivity assessment using a radical budget analysis and $NO_x$/VOCs-control strategy was consistent with that using indicator species ($H_2O_2/HNO_3$ ratio).

• Structural Monitoring and Maintenance
• /
• v.7 no.1
• /
• pp.1-12
• /
• 2020

Railway tracks are the direct supporting structures of the trains, which are vulnerable to produce large deformation under the temperature stress or subgrade settlement. The health status of track is critical, and the track should be routinely monitored to improve safety, lower the risk of excess deformation and provide reliable maintenance strategy. In this paper, the distributed optical fiber sensor was proposed to monitor the continuous deformation of the track. In order to validate the feasibility of the monitoring method, two deformation monitoring tests on one steel rail model in laboratory and on one real railway tack in outdoor were conducted respectively. In the model test, the working conditions of simply supported beam and continuous beam in the rail model under several concentrated loads were set to simulate different stress conditions of the real rail, respectively. In order to evaluate the monitoring accuracy, one distributed optical fiber sensor and one fiber Bragg grating (FBG) sensor were installed on the lower surface of the rail model, the strain measured by FBG sensor and the strain calculated from FEA were taken as measurement references. The model test results show that the strain measured by distributed optical fiber sensor has a good agreement with those measured by FBG sensor and FEA. In the outdoor test, the real track suffered from displacement and temperature loads. The distributed optical fiber sensor installed on the rail can monitor the corresponding strain and temperature with a good accuracy.

• Journal of Information Technology Applications and Management
• /
• v.9 no.3
• /
• pp.79-95
• /
• 2002

As the budget size and complexity of 1T investment are growing, IT value measurement becomes more critical to the success of IT management In public organizations and private firms. It has been known that there are many factors such as IT costs, risks, qualify, and usage that should be taken Into consideration during the process of measuring IT value and making IT Investment decisions. However, little research has been done so far In order to analysis factors affecting the IT value and effectiveness. The purpose of this study Is to Investigate the impact of IT Project types and ownerships on IT value evaluation. The three research questions are as follows : (1) Does IT project type such as transactional, Informational, and infrastructure have any impact on 1T value measurement\ulcorner (2) Does the IT development ownership has any Impact on IT value\ulcorner (3) Does the IT operation ownership has any impact\ulcorner The empirical research was done at S-Electronics, world-wide known and the biggest manufacturing company in Korea, based on the method of structured interview. About 200 individual Information systems have been evaluated to calculate ROI measures, the dependent variable In this study. The results of statistical analysis show that two of three Independent variables, IT project types and IT development ownership, have statistically significant effects on IT value in terms of ROI measures.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.6
• /
• pp.621-625
• /
• 2012

Conventionally, to measure derailment coefficient of a railway wheel, strain gauges for lateral force measurement are attached to both side of the wheel. But narrow gap between railway wheel and traction motor makes it difficult to attache the strain gauges at the inner side of wheel. In this study, to overcome the hard accessibility to the strain gauge points by narrow gap, a new Wheatstone bridge connection method is presented by attaching all the strain gauges at the outer side of wheel with a new bridge connection. We evaluate the running safety of railway vehicles in accordance with railway safety regulations. The experimental results obtained shows higher sensitivity than conventional methods and the derailment coefficient measurement procedure becomes simpler.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.230-237
• /
• 2006

The operational parameters and control strategies of a tertiary wastewater treatment process a biological filtration system were investigated. The biological filtration system consisted of a nitrification filter (Fiter 1) and a polishing filter with anoxic and aerobic parts (Filter 2). SS, T-C-BOD, and T-N in effluent were kept stable at less than 3, 5 mg/L, and 5 mgN/L, respectively, under a HRT in Filter (filter-bed) of 0.37~2.3 h. T-N at the outlet of Filter 2 were about 1~5 mgN/L under the condition of LV of 50~202 m/d. Methanol addition was controlled based on the COD/N ratio or McCarty's equation. Constant COD/N ratio control results in excess addition under large diurnal fluctuation of $NOx^--N$, and McCarty's equation can be used to add appropriate amount of methanol. Control of methanol addition by on-line nitrate measurement, control of aeration by on-line DO measurement, and control of backwashing by head loss measurement are successfully operated. These results proved that this process prove the easy-maintenance and cost-effectively treatment is attainable.

• Journal of Information Technology Applications and Management
• /
• v.12 no.3
• /
• pp.111-128
• /
• 2005

This paper examines the validity of the newly developed IT consulting SERVQUAL measurement tool. In an attempt to measure Ire IS customers' expectations and perceived quality of the services they received, the researchers developed a diagnostic tool of SERVQUAL based on the solid theoretical background, which can specifically be applied to the IT consulting service sector. This on-going research so far, has been applied to six (6) different organizations that have received IT consulting services over the past years. From the preliminary data collected, the correlation and the factor analyses were conducted to understand the underlying concept and refinement of the measurement tool. Although the correlation analysis showed a little tendency of collinearity among some of the variables, all showed sound relationship of the proposed hypotheses. The exploratory factor analytic approach was chosen because it does not set any priori constraints on the estimation of components or the number of components to be extracted. The number of different factor solutions was extracted and tested to see which solution represents better grouping of the variables. The Crombach's Alpha was computed on different combinations of the factor solutions to ensure validity. The results show 8-dimensional IT consulting SERVQUAL measures which they are, assurance, knowledge & skill, customer relationship, support, empathy, process management, expertise, and education, seem more appropriate than the originally proposed 6 dimensions. The study approach was non-experimental cross-sectional research design. The longitudinal design of follow-up studies to periodically revise and refine current measure is strongly recommended for fine tuning of the tool.

• Computers and Concrete
• /
• v.21 no.6
• /
• pp.727-739
• /
• 2018

Crack is the most common typical feature of concrete deterioration, so routine monitoring and health assessment become essential for identifying failures and to set up an appropriate rehabilitation strategy in order to extend the service life of concrete structures. At present, image segmentation algorithms have been applied to crack analysis based on inspection images of concrete structures. The results of crack segmentation offering crack information, including length, width, and area is helpful to assist inspectors in surface inspection of concrete structures. This study proposed an algorithm of image segmentation enhancement, named morphological segmentation based on edge detection-II (MSED-II), to concrete crack segmentation. Several concrete pavement and building surfaces were imaged as the study materials. In addition, morphological operations followed by cross-curvature evaluation (CCE), an image segmentation technique of linear patterns, were also tested to evaluate their performance in concrete crack segmentation. The result indicates that MSED-II compared to CCE can lead to better quality of concrete crack segmentation. The least area, length, and width measurement errors of the concrete cracks are 5.68%, 0.23%, and 0.00%, respectively, that proves MSED-II effective for automatic measurement of concrete cracks.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.114-117
• /
• 1998

Failure to link business or operations strategy with the activities of operations is a critical problem in strategy implementation process. This problem comes from malfunction of a coordination and control mechanism to support the strategic direction by effective communication throughout the firm. A performance measurement and evaluation system (PMES) is thought as a core mechanism to monitor, direct. and induce desirable activities. We have developed a new strategic PMES (SPMES) that can effectively support the manufacturing strategy by utilizing customized performance measures. They are selected from a pool of four distinct but closely related sets of performance measures; financial, market, internal competency, and performance driver. In this paper, we briefly review the structure of the SPMES and explain the change process of PMES into SPMES in manufacturing business units. First we analyze the business environment and manufacturing strategy to identify short- and long-term issues facing the management. Next step is scrutinizing the objectives and activities of every function and process in the business unit. Using the information obtained, we can diagnose the gaps between currently effective PMES and desirable SPMES supporting the strategies. Once the problems in existing system are identified, we reconfigure the existing and new measures to establish a SPMES through a series of analyses, discussions and workshops. In organizing the selected measures in the new system, we use AHP method to reflect the relative importance of the measures in a specific business. Finally, modification or development of information system to support the SPMES wraps up the development process, and implementation begins. We explain the entire process using two cases to clarify the real meanings and the difficulties of PMES change process.

• Journal of the Korean Society of Costume
• /
• v.64 no.3
• /
• pp.13-31
• /
• 2014

This study attempts to analyze relational structures among service failure-related variables after the moderation of fairness in the beauty service industry with the following purposes: First, it aims to review and investigate service failure & service recovery strategies, non-switching intentions after recovery, revisit intention, the intent to provide word-of-mouth recommendations and previous studies on service failure and recovery in the beauty service industry. Second, it targets the analysis of the role of fairness as a variable that moderates relations between service recovery strategies and post-recovery satisfaction in the beauty service industry. For this, the following research method was used: This study has investigated the effect of service failure and its recovery strategies (behavioral recovery strategy, psychological recovery strategy, monetary recovery strategy) on customer satisfaction for beauty service users and used the Structural Equation Model (SEM) to further analyze and verify the effect of the satisfaction on post-satisfaction behavior (non-switching intention, repurchase intention and the intent to provide word-of-mouth recommendations). The SEM was divided into a measurement model and structural model to determine if the model is appropriate and estimate the parameters of the path coefficient. In addition, this study examined to see if fairness (procedural fairness, distributive fairness and interactive fairness) works as a moderating variable while the service recovery efforts affect customer satisfaction. Then, the role of service recovery strategies, targeted to satisfy the customers who were dissatisfied because of service failure, were investigated. In addition, its effect on post-satisfaction behavior was analyzed from the structural aspect, and the moderating role was examined as well. Then, the role of the service recovery strategy, which can be used to satisfy dissatisfied customers, was examined, and the effect of the satisfaction on customer behavior was analyzed from a structural perspective. In addition, the moderating role of fairness was tested. As a result, this study is significant in that it helps service providers formulate service recovery-related strategies.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.4
• /
• pp.303-317
• /
• 2013

Two novel clocking strategies for a high-speed multi-channel serializer-deserializer (SERDES) are proposed in this paper. Both of the clocking strategies are based on groups, which facilitate flexibility and expansibility of the SERDES. One clocking strategy is applicable to moderate parallel I/O cases, such as high density, short distance, consistent media, high temperature variation, which is used for the serializer array. Each group within the strategy consists of a full-rate phase-locked loop (PLL), a full-rate delay-locked loop (DLL), and two fixed phase alignment (FPA) techniques. The other is applicable to more awful I/O cases such as higher speed, longer distance, inconsistent media, serious crosstalk, which is used for the deserializer array. Each group within the strategy is composed of a PLL and two DLLs. Moreover, a half-rate version is chosen to realize the desired function of 1:2 deserializer. Based on the proposed clocking strategies, two representative ICs for each group of SERDES are designed and fabricated in a standard $0.18{\mu}m$ CMOS technology. Measurement results indicate that the two SERDES ICs can work properly accompanied with their corresponding clocking strategies.