• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2001년도 학술대회지
• /
• pp.395-400
• /
• 2001

건설공사의 성공적인 수행을 위해서는 프로젝트의 성과에 대한 주기적이고 반복적인 측정 및 그에 대한 조치가 필요하다. 이에 비용, 일정, 품질은 프로젝트 성과 측정의 주요 대상이 되며, 비용 및 일정의 경우 정량화할 수 있고, 상호연관성이 높기 때문에 통합관리의 필요성이 매우 높다. 이러한 비용일정 통합관리를 통한 성과측정 방법이 바로 EVMS이며, 이러한 새로운 관리방식의 성공적인 국내적용을 위해선 그 관리 방법의 절차 및 의미가 명확히 인식되어야 한다. 이에 본 연구는 비용, 일정, 여유시간을 종합적으로 고려한 새로운 최적의 성과측정기준선(Performance Measurement Baseline)설정 및 진도율 산정 방법을 제시하고자 한다. 제시된 방법을 통해 비용 및 일정정보가 통합된 성과측정기준선이 마련되었으며, 진도율 산정에 있어서도 작업간 영향요소 및 공기지연가능성을 고려한 종합적인 작업별 가중치가 산정되었다.

• 품질경영학회지
• /
• 제22권2호
• /
• pp.41-50
• /
• 1994

Consider a canning process where cans are filled with an expensive ingredient. Cans weighting above the specified limit are sold in a regular market for a fixed price, and underfilled cans are emptied and refilled at the expense of a reprocessing cost. In this paper, the effect of measurement error on the determination of the optimal process mean for a canning process is examined. It is assumed that the quantity X of ingredient in a can is normally distributed with unknown mean and known variance, and the observed value Y of X is also normally distributed with known mean and variance. A profit model is constructed which involves selling price. cost of ingredients, reprocessing cost. and cost from an accepted nonconforming can, and methods of finding the optimal process mean and the cutoff value on Y are presented. It is shown that the optimal process mean increases. and the expected profit decreases when the measurement error is relatively large in comparison to the process variance.

• 산업경영시스템학회지
• /
• 제23권61호
• /
• pp.89-98
• /
• 2000

For statistical process control, the process data are collected by the measurement system. But, the measurement system may have instrument error or/and operator error. In the measured values of products, the total observed variance consists of process variance and variance due to error of measurement system. In this paper, we design more practical T-s control chart considering estimated measurement error The effects of measurement error on the expected total cost and design parameters are investigated.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1989년도 추계학술발표회논문집
• /
• pp.31-36
• /
• 1989

Low-cost and automated isolux diagram measurement system are investigated. The system is constructed with illuminance measurement array, analog multiplexer, A/D converter and 16-bit microcomputer. The experimental results show good agreement with the measured illuminance values. Decreasing the measure-spacing, the more accurate diagram can be obtained.

• 대한간호학회지
• /
• 제34권3호
• /
• pp.449-457
• /
• 2004

Purpose: The aim of this study was to analyze economical efficiency of home care service by comparing a cost-utility ratio(CUR) between home care and hospitalization. Method: The analytic framework of this study was constructed in 5 stages: Identifying the analytic perspectives, measurement of costs, measurement of utility, analysis of CUR, and sensitivity test. Data was collected by reviewing medical records, home care service records, medical fee claims, and other related research. Result: The mean of the annual total cost was 23,317,636 Won in home care and 73,739,352 Won in hospital care. QALY was 0.389 in home care and 0.474 in hospital care, so CUR was 299,712,545 QALY in home care and 777,841,266 QALY in hospital care. Conclusion: The findings affirmed that home care had an economical efficiency in the aspect of utility compared to hospitalization. Therefore, the findings of this study can be used to develop a governmental health policy or to expand the home care system. In addition, the cost-utility analysis framework and process of this study will be an example model for cost-utility analysis in nursing research. Therefore, it will be used as a guideline for future research related to cost-utility analysis in nursing.

• 산업경영시스템학회지
• /
• 제18권33호
• /
• pp.161-171
• /
• 1995

When physical distribution cost can be correctly measured, its management can also be efficient. Thus the primary objective of the study is to develop systems for measuring correctly physical distribution cost. The systems have two aspects : the One is the consumption of the resourses(materials, labor service, the other services), the other is the creation of physical distribution services(transportation, storage, cargo, packing, distribution conversion, management). By measuring the cost through the systems, the commoditization of the physical distribution services is possible and measurement of the cost and revenue can also be reasonable ,which makes its management efficient.

• 디지털융복합연구
• /
• 제8권4호
• /
• pp.185-204
• /
• 2010

본 연구는 정부기관의 정보시스템을 통합한 정부통합전산센터의 사례를 중심으로 IT 통합의 경제적 성과를 측정하였다. 성과측정을 위해 측정항목은 TCO 비용항목에 기반하여 사전 2개 기관에 대한 시범분석을 통하여 최종 측정항목을 개발하였다. 측정결과, IT 자산비용이 가장 큰 경제적 성과로 성과의 대부분을 차지하고 있으며, 다음으로 IT 지원비용과 IT 관리비용의 순으로 경제적 성과가 있는 것으로 조사 및 분석되었다. 본 연구의 주요 의의로는 국내외 선행연구 검토를 토대로 TCO 방법론에 따라 2개 기관을 대상으로 시범분석 과정을 통하여 TCO 측정항목을 IT 통합성과 측정에 적합하도록 개발하였으며, 동 측정항목을 기준으로 신뢰성 있는 현황자료를 토대로 객관적으로 경제적 성과를 측정하였다는 점이다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.163-167
• /
• 2009

Although the domestic electric power consumption of lighting have shared 20${\sim}$30 % of the national electric power consumption, the spread of lighting control system which can reduce the electric power consumption have been insignificant. The government have set the demonstration project and given the incentive to promote the spread of lighting control system since 2008. The M&V (Measurement and Verification) methodology for lighting control system have not been set yet in our country, but the direct measurement was suggested in US. The direct measurement methodology can increase the accuracy of measurement, but it cost much money to burden a customer. This study have suggested a new M&V methodology which cost low and is simple relatively. I had measured the amount of electric consumption through both the direct measurement and the new M&V program computation, and have analyzed the deviation. The amount of electric consumption measured by the new M&V program computation have agreed with one by the direct measurement within the error range of the instrumentation in case of lab scale test, and the 4${\sim}$8 % deviation have existed in case of field evaluation.

• 제어로봇시스템학회논문지
• /
• 제20권11호
• /
• pp.1136-1141
• /
• 2014

This paper proposes a new contact type ball tracking sensor to improve the control performance of a low cost ball-and-beam system. It is well-known that the impulsive measurement noise contained in ball position measurement is one of the factors which severely degrades the ball-and-beam control performance. The impulsive ball position measurement noises often appear under the sporadical ball floating on the beam. This fact motivates us to devise a simple analog preprocessing circuit to determine whether the ball loses the contact or not. Once the abnormal ball position measurement is detected, the design problem of the ball tracking sensor can be cast into the typical state estimation problem with missing data. In order to tackle the real-time implementation issue, a steady-state Kalman filter is applied to the problem. Through the experimental results, the usefulness of the proposed scheme is demonstrated.

• 한국건설관리학회논문집
• /
• 제10권1호
• /
• pp.69-77
• /
• 2009

최근 도심재생사업에 대한 관심과 연구가 활발히 진행되고 있다. 이는 기존 도시의 노후화된 건물과 저급화된 기반시설로 인해 파생되는 사회적 경제적 문제들을 새로운 도시개발 즉 재개발사업을 통해 해결하려는 노력의 일환이다. 그러나 도심재생사업은 사업에 관계되는 다양하고 복잡한 이해관계자들과 규모의 방대함으로 수많은 위험에 노출되어 있어 사업의 성과를 보장할 수 없다는 특징을 가지고 있다. 본 연구는 도심재생사업과 같은 메가 프로젝트의 성과관리를 함에 있어, 기존의 비용/공정 중심의 성과측정체계를 위험관리 관점으로 확장시킴으로서 메가 프로젝트에 대한 종합 성과관리의 효율성을 향상시키기 위한 목적으로 위험성과지수 방법론을 제시하였다. 본 연구에서 제시한 위험성과지수 방법론은 기존의 EVMS와 유사한 체계를 갖추고 있고, 위험성과지수를 구성하는 18종류의 세부지수와 변수를 통해 비용/공정/위험의 3차원적 통합 성과관리가 가능하게 하였다.