• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1625-1634
• /
• 2000

Verification of measurements is required for precise evaluation of turbine cycle performance in nuclear power plant. We assumed that initial acceptance data and design data of the plant could provide correlation information between performance data. The data can be used as sample sets for the correct estimation model of measurement value. The modeling was done practically by using regression model based on plant design data, plant acceptance data and verified plant performance data of domestic nuclear power plant. We can construct more robust performance analysis system for an operation nuclear power plant with this validation scheme.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.94-98
• /
• 2012

In order to serve the exact torque clamping force, the torque measurement system use the curve fitting algorithm by the least square. The corrected least square curve fitting algorithm which suggested in this paper can surpport more exact clamping force for fastner in variable industry field using the torque. At first, This paper introduces mathematical modeling for curve fitting algorithm, and simulate it. As a result, the corrected least square algorithm have shown lower standard error value than that of the used algoritm with torque, and so this corrected least square algorithm prove high accuracy than nomal least square algorithm. The suggested algorithm will contribute to improvement of cost and safety on industry field with bolt clamping force for precision industry parts, electronics parts, aircraft, aerospace, etc.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.184-184
• /
• 2012

We proposed a new measurement method of cutoff probe using the reactance spectrum of the plasma in cutoff probe system instead of transmission spectrum. The high accurate reactance spectrum of the plasma which is expected in previous circuit simulation of cutoff probe [1] was measured by using the automatic port extension method of the network analyzer. The measured reactance spectrum is good agreement with E/M wave simulation result (CST Microwave Studio). From the analysis of the measured reactance spectrum based on the circuit modeling, not only the electron density but also electron-neutral collision frequency can be simply obtained. The obtained results of electron density and e-n collision frequency were presented and discussed in wide range of experimental conditions, together with comparison result with previous methods (a previous cutoff probe using transmission spectrum and a single langmuir probe).

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.824-833
• /
• 2006

In this paper, the image modelling of road's lane markings is established using view frustum(VF) model. From this model, a measurement system of lane markings and obstacles is proposed. The system also involve the real time processing of the 3D position coordinate and the distance data from the camera to the points on the 3D world coordinate by virtue of the camera calibration. In order to reduce their measurement error, an useful algorithm for which analyze the geometric variations due to traveling vehicle's fluctuation using VF model is proposed. In experiments, without correction, for instance, the $0.4^{\circ}$ of pitching rotation gives the error of $0.4{\sim}0.6m$ at the distance of 10m, but the more far distance cause exponentially the more error. We con finned that this algorithm can be reduced less than 0.1m of error at the same condition.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.4
• /
• pp.89-99
• /
• 2014

The purpose of this research is first, to define what measurement items in terms of subjective consideration and preference can be used to assess the landscape values of agriculture and fisheries heritage, and second, to understand the perceptive patterns particularly how landscape experts weigh up the importance of the each measurement item. In order to extract the measurement items, extensive literature review was performed including research documents as well as domestic and international policy reports. A survey targeting the experts was conducted to ask their opinions on the importance of the selected items. For the analysis, SPSS 20.0 for Windows was used to carry out reliability analysis, descriptive statistics such as arithmetic mean and frequency distribution, factor analysis, and multiple linear regression modeling. The results are: the importance value of the landscape values in agriculture and fisheries heritage was 4.1494; the ratio value that the experts perceived the importance was 87.2%; and the average of the importance value of the analyzed items was 3.71. All the items have more than 3.00. Ten factor groups were summarized and defined whose total explanation power was 67.86%. The factor groups were named as lyricism, authenticity, environmentally-friendliness, durability, recognizability, regionality, visibility, value of sightseeing, social image, and universality. The factors influencing the landscape values are, in order of importance, recognizability, authenticity, visibility, universality, durability, and nativeness. According to the analysis, however, environmentally-friendliness, regionality, value of sightseeing, and social image were not as important.

• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.195-199
• /
• 2003

The stoichiometric methan/air premixed turbulent flames at the axisymmetric Bunsen burner situation are numerically investigated. To account for the chemistry-turbulence interaction in the turbulent premixed flames, the steady laminar flamelet library method has been adopted. The flame front is tracked by using the Level-Set Approach. Turbulence is represented by the ${\kappa}-{\varepsilon}$ modeling with a Pope's correction. The detailed comparison between prediction and measurement has made for the flame field in terms of velocity, turbulent kinetic energy, and normarlized temperature.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.108-111
• /
• 2000

The electrical characteristics of MQFP packages have been measured in RF regime. The s-parameter of the lead frame has been measured using the test fixture on which the do-capped package was mounted. A simple lumped equivalent circuit modeling of the lead frame and the test fixture can provide reasonable model parameters up to the frequency of 200 MHz.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.241-244
• /
• 2002

Using disturbance observers is effective in enhancing the performance of systems in presence of disturbances. In this paper, we present a novel design of disturbance observers to achieve enhanced robust performance. In addition, we propose a new method of reducing the effect of measurement noise via modification of plant modeling in disturbance observer.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.325-327
• /
• 1999

In this research, selection of component load and measurement device is considered for accurate component load modeling. The procedure of component load characteristic experiments is also presented.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.7
• /
• pp.82-88
• /
• 1992

This paper presents one of the first comprehensive studies of how hot electron degradation impacts the input offset voltage of a CMOS differential amplifiers. This study utilizes the concept of a virtual source-coupled MOSFET pair in order to evaluate offset voltaged egradation directly from individual device measurement. Next, analytical models are developed to describe the offset voltage degradation. These models are used to examine how hot electron induced offset voltage is affected with the device parameters.