• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.71.5-71
• /
• 2001

This paper presents the vibration control of a flexible intelligent beam with added mass. The materials which is a glass fiber reinforced(GFR) thermoplastic composite is employed to achieve vibration characteristics according to added mass induced end of composite beam. In the experiments of forced vibration control, the -controller are employed to achieve vibration suppression in forced vibration situations. Also, in the controller design, 1st and 2nd´s natural frequencies are considered in the modeling, because robust control theory which has robustness to structured uncertainty is adopted to suppress the vibration. By designing a controller using mu-synthesis, robust performance against measurement noise, various modeling.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.173-177
• /
• 2007

This paper describes the simulations on the actual measurement analysis and lighting design for recreational sports facility. Based on illumination requirements, sports may be divided into multidirectional sports and unidirectional sports. Typical multidirectional aerial sports include Jokcu. These sports require well distributed horizontal illumination and uniformity according to aiming. Therefore, this paper estimates horizontal illuminance and uniformity ratio by actual measurement of sports lighting at recreational Jokcu court in Cheju National University and evaluation of sports lighting conditions for optimal design by computer simulation.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.70-79
• /
• 2013

In this paper, a comparative study on the frequency estimation methods using IRDWT (Improved Recursive Discrete Wavelet Transform), FRDWT(Fast Recursive Discrete Wavelet Transform), and GCDFT(Gain Compensator Discrete Fourier Transform) is presented. The 345[kV] power system modeling data of the Republic of Korea by EMTP-RV is used to evaluate the performance of the proposed two kinds of RDWT(IRDWT and FRDWT) and GCDFT. The simulation results show that the frequency estimation technique based on FRDWT could be the optimal frequency measurement method, and thus can be applied to FDR(Fault Disturbance Recorder) for wide-area blackout protection or frequency measurement apparatus.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.932-937
• /
• 2008

The pulsation of a reciprocating type hydrogen compressor is occurred from the mechanism and this pulsation makes much noise and vibration. To reduce this pulsation, snubber is usually installed on that. To maintain the efficiency in the reciprocating type hydrogen compressor, the pulsation and vibration should be reduced. so it is necessary to research about the characteristic of pulsation and vibration. Therefore in this paper, the vibration characteristic of the snubber is analyzed in the base of optimized modeling condition through the flowing analysis of existing snubber. The prototype of reciprocating type hydrogen compressor is analyzed with numerical analysis. And making sure the present condition of hydrogen compressor through measurement of vibration and noise, and then it is established that the vibration characteristic data base on numerical analysis which will be develope.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.3
• /
• pp.167-174
• /
• 2003

The outsole mold of the shoes has been manufactured using electro-discharge machining by graphite electrode or using casting etc. The study is concerned with the measurement of the mold of the shoes in use, the modeling by CAD/CAM system, the generation of NC data and the machining by CNC machining center. The machining has been performed from the data type obtained from 3-dimensional measurement points of mold in use. The ball end mill and the engraving cutter is used as cutter and the cutting conditions are adjusted according to the shapes and sizes of the cutter and part in cutting. The method has proposed the possibility for higher productivity and quality on mold-manufacturing of shoes outsole.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.2
• /
• pp.68-74
• /
• 2013

In this paper, an average surface roughness, $R_a$, was measured by optical measurement and its mathematical model according to spindle speed and feedrate was obtained by least square method. Also, its result is compared and investigated with real measured average surface roughness. The optical measurement of surface roughness is performed by CLSM(confocal laser scanning microscope) and the captured HEI(height encoded image) data is used as an original data for the generation of average surface roughness and its mathematical plane or contour surface of surface roughness. Using this polynomial model with two independent variables, the behavior of an average surface roughness is investigated and analyzed with an experimental modeling of least square algorithm. And it can be used for the prediction of $R_a$ in different condition of machining.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.80-89
• /
• 2011

In service science, it is critical to measure service satisfaction for innovating service processes, which is challenging for service sectors oriented to the usage of IT systems. For that purpose, in this study, a model based on the technology acceptance model and satisfaction measurement model is proposed. The model is empirically tested using data sets from a public service sector (G2B) and a private service sector (internet banking). The purpose of this study is to identify factors which affect the service satisfaction. The result shows that a public service sector is less sensitive to the IT systems on which its services are operated, and that the attitude factor strongly affects the service satisfaction in both sectors.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.166-172
• /
• 2012

The standard wave height measurement system is usually based on spectrum analysis for measuring wave height. The spectrum analysis is complicated because of the FFT, and the FFT is not for real time processing since it requires the saved data segments. In this paper, we carried out the performance evaluation of real-time and simpler wave height measurement system using the kalman filter and inertial sensors. The kalman filter theory is complicated, but its algorithm is simpler than the FFT and the kalman filter is used to estimate wave height by integrating acceleration data. But the accumulated error is occurred when the acceleration data is integrated. We developed the algorithm using the wind wave characteristic to decrease the accumulated error. In this paper, the performance evaluation of the wave height measurement system is carried out for various wind wave conditions. Through the experiments, we verified that it shows high measurement performance with the 3.5% margin of error in wind wave condition.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.809-812
• /
• 2005

In this work, a new method for extracting substrate parameters of RF MOSFETs based on 3-port measurement is presented using device simulation. A T-type substrate resistance network is used. 3-port Y-parameter analyses were performed on the equivalent circuit of RF MOSFETs. All the components in the RF MOSFETs when the device is turned off were extracted directly from the 3-port device simulation data. The small-signal output admittance $Y_{22}$ can be well modeled up to 40 GHz. From the 3-port simulation and modeling results, it was verified that the proposed equivalent circuit and parameter extraction method was more accurate than the single substrate resistance model.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.431-436
• /
• 2005

In this paper, We proposed the stereo image modeling using 2-dimensional images captured by the high resolution cameras to inspect the ball defects of BGA(Ball Grid Array) device. The proposed algorithm consists of the package/ball area extraction part, the FOV(Field of View) calibration part, the top point matching part, and ball height measurement part, In the package/ ball area extraction part, the package and ball areas are separately extracted in a left and right image by the extraction algerian. Through the experiment, we draw out the result.