• Explosives and Blasting
• /
• v.35 no.1
• /
• pp.34-42
• /
• 2017

It is very difficult to clearly define the damages caused by blasting-induced noise and vibration, because the damages depend on, besides the level of noise and vibration, the response of the object, environmental conditions, subjective feeling, and mental condition. Especially, it is more difficult when the fish is concerned, because that experimental approach is not easy and that we lack of the reasonable criterion for the acceptance level of noise and vibration. In Korea, the acceptance level for damage due to underwater noise is 140 dB re $1{\mu}Pa$, and the difference from the underwater background sound level is defined as more than 20 dB re $1{\mu}Pa$. It is however, appropriate for continuous noise not for transient sound. The authors compared the relationship between vibration velocity and underwater noise measured from the test blasting around Marphysa sanguinea farm. This paper presents the measurement results and suggestions the acceptance level for damage due to underwater noise from explosive blasting.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1295-1303
• /
• 2010

In this paper, an effective method has been proposed for selection of white Gaussian noise(WGN) band for radio background noise measurement system under broad band noise environment. MMN which comes from industrial devices and equipment mostly happens in the shape of broad band noise mostly like impulsive noise and this is the main reason for increasing level in the present radio noise measurements. The existing method based on singular value decomposition has weak point that it cannot give good performance for the broad band signal because it uses signal's white property. The proposed method overcomes such a weakness of singular value decomposition based method by using signal's Gaussian property based method in parallel. Moreover, this proposed method hires a modelling based method which uses parameter estimation algorithm like maximum likelihood estimation(MLE) and gives more accurate result than the method using amplitude probability distribution(APD) graph. Experiment results under the natural environment has done to verify feasibility of the proposed method.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.19-28
• /
• 2012

A measuring technique for tire-pavement interaction noise that uses a proposed noble close proximity(NCPX) method, which has been proofed in terms of the reliability and consistency of interaction noise measurement through several researches, equipped with surface microphones has been adopted in order to perform bridge deck pavement noise evaluations on four different pavement surfaces. Through field testing measurement of bridge deck pavement in Seoul inner ring road, the appropriate noise-measuring procedures have been used for evaluating the noise characteristics of four different surfaces. Measuring results show that tire-pavement noise levels vary depending on the surface types and vehicle speeds. Furthermore, the different characteristics of tire-pavement interaction noise can be found before and after the new surface construction of bridge deck pavements in terms of the 1/3 octave band analysis of vehicle speed.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.75-83
• /
• 2013

PURPOSES: The purpose of study is to understand the characteristic of driving noise from the front and rear tire for effective active noise cancellation application. METHODS : As literature review, noise measurement methods were reviewed. Noise measurement conducted at three kind of section by road slope using CPX(Close Proximity Method). Noise data was compared by total sound pressure level and 1/3 octave band frequency sound pressure level. Also, each section was compared by T-test using SPSS. RESULTS : In the case of the uphill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low and high frequency band. In the case of high slope section of Sangsaek-Ri, the sound pressure level of the front tire was higher than that of the rear tire in high frequency. Also, in the case of the downhill section, it was shown that the sound pressure level of the front tire at Sugwang-Ri and Sinchon-RI sections was higher than that of the rear tire in low frequency band. However, the sound pressure levels of both the front and rear tires were approximately the same in the high slope section of Sangsaek-Ri. The result of T-test showed that total sound pressures of the front and rear tires were not different from each other in the case of high slope and high speed. CONCLUSIONS: Road slope was not an important variable for effective active noise cancellation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1115-1119
• /
• 2007

As in many of the vehicle NVH issues, blower motor noise has been improved over the years through intensive R&D and production process improvement. Durability of motors, however, still has room for improvement according to customer surveys such as VDS. To investigate the noise issues of blower motors in view of durability, current production motors along with major competitor motors are tested. The noise after accelerated durability test shows that production motors are competitive in noise level with similar noise performance compared to initial measurement. The test result also provided guidelines to the durability development process.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.729-732
• /
• 2004

An experimental and numerical approach has been carried out for to see the noise characteristics of a circular diamond saw. The noise level measurement result for the several kinds of shanks shows us that the noise level reduction in high frequency range could be an effective way to control the noise problem. Sandwich type shank whose center part is laminated with a low Young‘s modulus material greatly reduces the noise level. The noise level for the shank where several curve shaped slits are provided in the circumferential direction is reduced considerably too. The response spectrum analysis by the FEM shows us to be an alternative for predicting the noise characteristics of the shank.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.9
• /
• pp.982-989
• /
• 2008

There is a noticeable hum from the inverter board of LCD TV when in operation. In this study, we investigate the source and the characteristics of this noise for the inverter board of LCD TV using measurement of vibration and noise. Modal analysis of vibration and noise is visualized for identification of noise sources and transmission vibration. The main source of noise was the transformer of the LCD TV inverter. A noise reduction was achieved by damping the structural elements.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.822-827
• /
• 1999

The reduction of booming noise level and improvement of sound quality in the vehicle interior have been major fields of vehicle NVH for many years. In order to reduce the booming noise this paper proposed a system variable, which takes account of mode shapes and natural frequencies of the structural-acoustic system, measurement points and excitation frequency. By simplifying the system variable, the major contributors of panels inculding roof, roof lining, wind shield glasses, doors and floor to booming noise at a specific frequency was experimentally found. Also the relationships between structural modes of roof lining, one of the major contributors, and acoustic modes of compartment cavity were investigated from the viewpoint fo structure-borne noise. In addition, the roof lining was modified structurally by applying marble sponge to the gap between roof and roof lining. Asthe result of structural modification, the booming noise was reduce at target frequency.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.887-890
• /
• 2007

The low frequency noise, including infra-sound is known to affect human physiology and psychology. Guidelines and measurement method of low frequency noise has been introduced in several countries in order to evaluate low frequency noise. In this work, low frequency characteristics of Daejeon subway was investigated in terms of the noise level and spectrum in the interior of running subway car and the subway station. The interior sound pressure level of the passenger car was between 60 and 102 dB in the frequency range of $1{\sim}250$ Hz.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.629-634
• /
• 2001

The construction of the elevated railway has led to concerns about the noise from trains, particularly as tracks often pass close to residential dwellings. One specific issue relates to the noise from trains on bridges. The wayside noise for the train was measured to get the basic data that can be used to prepare count measures for solving environmental noise problems. Noise levels were measured simultaneously at three points in various distances from the railroad and at four points classified by floor. In this paper we measure the wayside noise in elevated railway and noise of normal operation compare with operating under train engine idling condition and investigate effect of nearby-building induced by train operation.