• Journal of the Korean Society of Hazard Mitigation
• /
• v.11 no.3
• /
• pp.191-200
• /
• 2011

Levee failure cause the huge amount of damage to human and property. Overflow and erosion of levee are primary cause of a break in a levee but the analysis of breach pattern and impact is partially inadequate. The flow characteristics of meandering rivers are very important in field of river hydraulics that should be studied in practical viewpoints relating to river levee. In meandering the secondary flow that rotary direction is changed reciprocally occurs in three dimension is known. In this study flow characteristics of local river are considered and of meandering channels are analyzed using CCHE2D and FLOW3D. The stability and accuracy of models are examined comparing the measuring and analyzed data for the experimental channel and natural river(Namgang). Consequently, the flow characteristics in a meandering river are suggested precisely and it is essential that river levees having meandering river should be analyzed.

• KCID journal
• /
• v.21 no.1
• /
• pp.118-126
• /
• 2014

In this study, the use of the spur of riverbank technique is being investigated. The spur of the riverbank typically reduces the velocity of flow and protects the embankments by increasing friction along the water and the banks. This also has an effect in the rise of water level upstream. It is also used for the rectification of riverside line and restoration of the waterway through sedimentation near the spur of the riverbank. In this study, physical-scaled experiments are conducted to investigate the process of creating a mild meandering channel using the spur of the riverbank with varying water flows and sedimentation functions. The hydraulics observations are taken with respect to the varying heights and length of the riverbank's spurs and the distance between each spur for the formation of the mild meandering channel. It is observed that for 1.06 times of the meander length, it requires 2 times of the interval with each spur of river width. Similarly, 1.25L times of the meander length, it requires 0.5 times of the interval with each spur of river width. The sand accumulation is induced by the spur of riverbank when the spur of riverbank's heights are more than 40% of water depth and the length of the spur of riverbank needs under than 20% of river width for avoid exaggerated sand accumulation in the center of channel.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.131-139
• /
• 2012

Field experiment was performed from June 2010 to July 2011 to evaluate pollutants removal efficiency in the constructed wetland system for the treated wastewater and the river water. The wetland systems were constructed near Gyungan river. Two different systems with meandering shape were compared for seasonal base and operational period base. Several kinds of aquaculture are planted through the corridor of wetland system. Average removal rate of BOD, T-N and T-P for A system were 15.8%, 14.8% and 26.5%, respectively. Average removal rate of BOD, T-N and T-P for C system were 23.5%, 27.8% and 10.6%, respectively. The effluent from two wetland systems often exceeded effluent water quality standards for wastewater influent, however effluent water quality standards for river water. However, the wetland system can be useful to treat polluted river water and effluent from wastewater plant. Removal rate of pollutants in seasonal variation was the highest in summer for BOD and T-N, however the removal rates of T-P were higher in spring and autumn than in summer.

• Water for future
• /
• v.13 no.2
• /
• pp.49-54
• /
• 1980

Meandering has been attributed to the earth's rotation, to the excessive slope and energy of a river, to changes in stage, etc. The purpose of this study is a geometrical approach of meander shape and to derive the relationship among meander characteristics. In the analysis of sime field examples, in spite of variety of meander shapes, the sine-generated curve was fit actual quite well and better than alternatives against the channel distance. An attempt is made to find considerable relation among meander characteristics. But width and meanderbelt did not show any defined trend considerable scatter of points was observed.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.14-30
• /
• 2015

This paper attempted to analyze the hydraulic effects that the dredging can take as an alternative to reduce possible damages of flooding due to the overflow of river levee in meandering rivers, where riverbed aggradation, seepage and erosion may occur. In order to make a hydraulic analysis in a section of meandering rivers, a two-dimensional hydraulic analysis model, RMA-2, was selected. The GIS was applied to construct two-dimensional finite element grids to consider the hydraulic conditions before and after dredging. The water surface elevations, depths, velocities, and tractive forces were compared before and after the dredging. The difference of water surface elevation between the inside and outside of river was turned out to be the maximum value of 0.58m under the design flood condition. It could be evaluated that the tractive force at the bank decreased about 42 to 67% on average for all the sections. These results could give valuable information that the dredging of the stream channel at the meandering sections decreased the risk of overflow, seepage and erosion of the banks. The methodologies given in this study will contribute to mitigating the flood damages in the surrounding farmlands.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.1
• /
• pp.15-26
• /
• 2019

In this study, we investigated the grain size, lithological type, and shape of coarse bed materials in the upper and middle reaches of Gongneungcheon River. For this purpose, 11 sampling points were selected along the river. For 100 samples of the coarse bed materials at each point, three axes (long, intermediate, and short) of samples were measured, and their lithological types were also identified. By measuring grain size, the sphericity and flatness of samples were calculated. Finally, every particle was classified into four shape categories: sphere, disc, blade and rod. We found that the grain size in incised meandering reach is the largest. This is mainly due to the supply of coarse materials from steep valley sides along the meandering channel. According to the lithological analysis, all samples were identified as granite, gneiss and schist, and quartz. The proportion of granite decreased, whereas the proportion of gneiss and schist increased downstream. These patterns indicate that the bedrock distribution within the study area accounts for the downstream lithological variation of coarse bed materials. With regard to the grain shape, sphericity gradually decreased while flatness gradually increased downstream. In the case of the shape classification, unlike the general downstream pattern of grain shape, the proportion of the sphere type decreased and the proportion of the blade type increased downstream. Such a reversal change in the downstream direction turns out to be determined by the lithology (such as foliation, bedding and the pattern of weathering) of coarse bed materials.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.810-814
• /
• 2009

Two dimensional steady and unsteady numerical models are applied to bend reaches of the Lower Han River and the superelevation at the Ichon-Banpo bend area of Han River was observed. The flow characteristics in the meandering river are complicated due to the effects of the centrifugal force. The centrifugal force makes the outside water surface level increase and the outside velocity decrease. To study this complex flow studying two dimensional flow is important and useful to design flood control countermeasures, the analysis of sedimentation and the site selection of intake structures. Especially, the superelevation between inside and outside of the bend should be considered to determine the height of embankment. In this study, the water surface elevations in both bank sides of the bend were measured in two reaches during floods in 2007 and 2008. And then the two-dimensional simulation using RMA-2 model was carried out. The upstream and downstream boundary conditions on bend reaches were determined by FLDWAV which is one-dimensional unsteady model. Finally, the observed data are compared with simulation results and the results of the several superelevation formulas, and the flow characteristics of the bend are discussed.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.673-689
• /
• 2003

Field tests were conducted to investigate characteristics of the transverse mixing and to evaluate the dispersion coefficients in the meandering natural streams. The Sum River and the Cheong-mi Creek, tributaries of Han River, were selected as the test site, and measurements of the hydraulic and dispersion data were performed. In the tracer tests, the radioisotope was used as a tracer and injected into a flow on the instantaneous point source. Using the measured data, the longitudinal and transverse dispersion coefficients were evaluated and compared with the previous studies. The longitudinal dispersion coefficients, which were evaluated by application of the analytical solution, were about 0.5 $m^2$/s at the Sum River and 0.2 $m^2$/s at the Cheong -mi Creek. The transverse dispersion coefficients, which were evaluated by the analytical solution and the moment method, were ranging from 0.01 to 0.06 $m^2$/s for the Sum River and from 0.01 to 0.05 $m^2$/s for the Cheong-mi Creek.

• Economic and Environmental Geology
• /
• v.31 no.5
• /
• pp.431-446
• /
• 1998

The calcretes from the Cretaceous Gyeongsang Supergroup in the vicinity of Ulsan city have been examined at five sites (Daedong, Seodong, Ansachon, Deogha, and Mangyangri). In these calcretes, evidences indicating pedogenic origin are recognized. Included are calcite aureoles around detrital grains, pedotubular pores, microstromatactis, circumgranular cracks, fitted structure of adjacent peloids, calcrete ooids, rhizocretions, and calcrete intraclasts. On the basis of calcrete development together with lithofacies, the depositional environments of those deposits are interpreted as lake margin (Daedong deposits), braided to low-sinuosity river (Seodong deposits), braid plain (Ansachon deposits), and meandering river (Deogha and Mangyangri). Stratigraphically, the fluvial deposits of study area show paleoenvironmental change from braided to low-sinuosity river plain under arid climatic condition to meandering river plain under seasonally wet an dry climatic condition. The stratigraphic successions of the Gyeongsang Supergroup of the study area Qacustrine-fluvial-Iacustrine) together with paleoenvironmental change of fluvial deposits suggest that those deposits can be correlated with the Banyaweol-Songnaedong-Geoncheonri formations of the Gyeongsang Supergroup in the western part of the Yangsan Fault.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.5
• /
• pp.173-181
• /
• 1993

Under natural conditions, rivers do not in general take straight courses but instead take winding courses. This is known as meandering of rivers. Meandering of rivers are so complicated because of the mutual interactions between flow and movable boundaries. In quantitative information, it is important to predict the future location of a river channel(channel migration) because in selecting a bridge site or a location of a road. It may be valuable to know the future impact of a nearby river on those structures. When the prediction model of the migration of channel is used in domestic rivers with high coefficient of river regime, it is rational to use the periodical dominant discharge (PDD), which is named firstly by the author, instead of the average discharge. According to the analysis of the erosion coefficient, the mean deviation on the channel migration, and the bed scour factor, it can bring shedding light on the fact that the discharge is one of the dominant components in channel migration. In project area, the discharge that can shift the channel is slightly greater than 6,000CMS. The prediction model of the migration of channel estimated the erosion coefficient, $E_0$ by the data from the South Han River. This estimated value from the South Han River was also used to predict the migration of the South Han River in year 2000.