• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.261-262
• /
• 2003

We performed unsymmetrical analysis of a single line-to-ground fault in a three-phase system. The current limiting elements were meander type YBCO stripes coated with Au shunt. When the fault occurred, short circuit currents were effectively limited within 1-2 msec after fault instant. The unsymmetrical rate of fault phase was distributed from 6.4 to 1.4 and most of the fault current flowed in the grounding line due to its direct grounding system.

• Progress in Superconductivity
• /
• 제14권2호
• /
• pp.96-98
• /
• 2012

Bias current dependence of a superconducting strip photon detector is studied in the wavelength range of 405 to 1310 nm. The detector is made of an $MgB_2$ meander pattern with the line width of 135 nm and thickness of 10 nm. At 1310 nm, the detection efficiency exponentially decreases as the bias current decreases. While at 405 nm, the detection efficiency almost saturates in the high bias current region. These features suggest that the intrinsic detection efficiency of the $MgB_2$ detector is high at 405 nm.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.149-152
• /
• 2002

In this paper, We have designed an internal chip type-ceramic antenna and diplexer for dual-band handset applications. for increasing bandwidth, antennas used a meander line structure with L, C matching network. The designed diplexer is based on the multi-layered structure for the purpose of the LTCC applications. We have given a notch using resonator for elevated attenuation characteristics.

• 한국관개배수논문집
• /
• 제21권1호
• /
• pp.118-126
• /
• 2014

In this study, the use of the spur of riverbank technique is being investigated. The spur of the riverbank typically reduces the velocity of flow and protects the embankments by increasing friction along the water and the banks. This also has an effect in the rise of water level upstream. It is also used for the rectification of riverside line and restoration of the waterway through sedimentation near the spur of the riverbank. In this study, physical-scaled experiments are conducted to investigate the process of creating a mild meandering channel using the spur of the riverbank with varying water flows and sedimentation functions. The hydraulics observations are taken with respect to the varying heights and length of the riverbank's spurs and the distance between each spur for the formation of the mild meandering channel. It is observed that for 1.06 times of the meander length, it requires 2 times of the interval with each spur of river width. Similarly, 1.25L times of the meander length, it requires 0.5 times of the interval with each spur of river width. The sand accumulation is induced by the spur of riverbank when the spur of riverbank's heights are more than 40% of water depth and the length of the spur of riverbank needs under than 20% of river width for avoid exaggerated sand accumulation in the center of channel.

• 한국음향학회지
• /
• 제9권3호
• /
• pp.24-30
• /
• 1990

본 연구에서는 표면에서 한파장 깊이 이내에 존재하는 결함 검출에 우수한 특성을 나타내는 meander line형 EMAT를 설계, 제작하고 그 특성을 연구분석하였다. 효율적인 동 자기장을 위하여 간격 0.72mm와 폭 0.65mm의 코일을 구성하였으며 정 자기장을 위하여 1500 가우스의 자석군을 구성하였다. 제작된 EMAT는 중심 주파수 2MHz, 비대역폭 36%를 가지며 임펄스응답 특성은 0.15 mm의 비접촉 방법으로 측정되어 이론과 비교되었고 중심 주파수에서의 삽입손실은 45.46 dB로 측정되었다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.214-217
• /
• 1999

We investigated the quench characteristics of meander line type resistive superconducting fault current limiters based on YBCO thin films grown on 2" diameter LaAlO$_3$ substrates. A gold layer was deposited onto the 0.4 ${\mu}$ m thick YBCO film to disperse the heat generated at hot spots, prior to patterning into 1 mm wide meander lines by photolithography. The limiters were tested with simulated fault currents of various amplitudes. The quench started at 10 A and was completed within 1 msec at the fault current of 65 A$_{peak}$. The dynamic quench characteristics were explained based on the heat conduction within the film and the heat transfer between the film and the surrounding liquid nitrogen. The heat transfer coefficient per unit area was estimated to be 3.0 W/cm$^2$K.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1286-1291
• /
• 2003

Quench behavior of resistive superconducting fault current limiters (SFCLS) with various pattern shapes was investigated. The pattern shapes employed were meander, bi-spiral, and spital shapes of identical line width, gap and margin. SFCLS were fabricated from YBCO thin films grown on two-inch diameter Al$_2$O$_3$ substrates under the same conditions. The total length of current limiting paths was the shortest at the spital shape due to its larger useless space. Inductance component of SFCLs with the spiral shape was around two times as high as those of other two shapes. This is not desirable since impedance characteristics of existing power systems can be changed. Resistance rise of current limiting elements was low at a spiral shape before the whole quench completion, which may act as a disadvantage for simultaneous quench in serial connection between current limiting elements, but the temperature tended to have similar values at higher voltages. On the other hand, hi-spital shape was severe at insulation level between current limiting lines. When these aspects were considered, we concluded that a meander shape was appropriate to design for a resistive SFCL based on thin films except the concentration of electric field at edge areas of strip lines.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.77-78
• /
• 2016

본 논문에서는 소형 WLAN 안테나에 적용 가능한 안테나 설계를 설계하고 적용 가능성을 검토하였다. 제안된 안테나는 $20mm{\times}60mm$ 크기의 RF4 기판(비유전율 4.4, 두께 1.6 mm, 손실탄젠트 0.025) 위에 $20mm{\times}20mm$ 크기 이내로 마이크로스트립 패치 안테나를 인쇄하였다. 안테나 파라미터는 OpenFDTD 시뮬레이터를 사용하여 계산하였다. 계산 결과로서 WLAN 사용대역 2.4-2.48GHz을 고려할 때 정재파비가 2 이하인 주파수 대역은 1.82-3.05GHz(1.23GHz, 44.6%)로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.277-280
• /
• 1999

We fabricated a resistive superconducting fault current limiter of two stripe meander type based on a YBCO film, and performed current limitation experiments. In order to disperse the heat generated at hot spots in the YBCO film the film was coated with a gold shunt layer. At $0^{\circ}$ fault angle the minimum quench current was $9.6 A_{peak}$(meander line cross section: $5{\times}10^{-6}cm^2$) and the fast quench time was 0.63 msec. The resistance of the limiter continued to increase for three cycles due to heat generation in the gold layer and was stabilized afterwards. At $45^{\circ}$ and $90^{\circ}$ the fast quench time were 0.56 msec and 0.26 msec, respectively. The quench time is believed to be reduced because faults occurred when the current was increasing or was at the peak value. With the limiter we could effectively limit the fault current about 1/5 times right after the fault and about 1/8.5 times three cycles after.

• 한국정보통신학회논문지
• /
• 제19권12호
• /
• pp.2773-2778
• /
• 2015

본 논문에서는 LTE, WCDMA, US-PCS, WLAN의 여러 대역을 동시에 사용하기 위한 3개의 폴디드 패치 형태의 선로를 이용한 소형 안테나를 제안한다. 3개의 패치들로 부족한 대역폭을 넓히기 위하여 패치들의 폭에 변화를 주어 $S_{11}$<-6dB(VSWR<3)에서 사용할 수 있도록 최적화하였다. 제안된 안테나는 동일평면에 복사소자와 접지면을 갖고 회로와 직접화가 용이한 CPW를 사용하였으며, $44.9{\times}35{\times}1mm^3$의 크기로 FR4 기판을 가지고 설계 및 제작하였다. 제작된 안테나는 동작대역에서 $S_{11}$<-6dB 특성을 만족하였다. 또한 측정된 복사패턴과 이득의 특성을 나타내였다.