• Title/Summary/Keyword: mean values

Search Result 6,203, Processing Time 0.036 seconds

Quantitative Comparison of Activity Calculation Methods for the Selection of Most Reliable Radionuclide Inventory Estimation

  • Hwang, Ki-Ha;Lee, Sang-Chul;Lee, Kun-Jai;Jeong, Chan-Woo;Ahn, Sang-Myeon;Kim, Tae-Wook;Kim, Kyoung-Doek;Herr, Y.H.
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2003.11a
    • /
    • pp.322-327
    • /
    • 2003
  • It is important to know the accurate radionuclide inventory of radioactive waste for the reliable management. However, estimation of radionuclide concentrations in drummed radioactive waste is difficult and unreliable because of difficulties of direct detection, high cost, and radiation exposure of sampling personnel. In order to overcome these difficulties, scaling factors (SFs) have been used to assess the activities of radionuclides that could not be directly analyzed. A radionuclide assay system has been operated at KORI site since 1996 and consolidated scaling factor method has played a dominant role in determination of radionuclides concentrations. However, some problems are still remained such as uncertainty of estimated scaling factor values, inaccuracy of analyzed sample values, and disparity between the actual and ideal correlation pairs and the others. Therefore, it needs to improve the accuracy of scaling factor values. The scope of this paper is focused on the improvement of accuracy and representativeness of calculated scaling factor values based on statistical techniques. For the selection of reliable activity determination method, the accuracy of estimated SF values for each activity determination method is compared. From the comparison of each activity determination methods, it is recommended that SF determination method should be changed from the arithmetic mean to the geometrical mean for more reliable estimation of radionuclide activity. Arithmetic mean method and geometric mean method are compared based on the data set in KORI system.

  • PDF

Evapotranspiration and Water Balance in the Basin of Nakdong River (낙동강유역의 증발산량과 물수지)

  • 조희구;이태영
    • Water for future
    • /
    • v.8 no.2
    • /
    • pp.81-92
    • /
    • 1975
  • Calculation of the monthly water balance for Nakdong River basin for the period from 1958 to 1968 is made by determining three components independently: precipitation, runoff and evapotranspiration. The areal precipitation is computed by the Thiessen method using the records of nine meteorological stations in the basin, and the runoff is the flow gauged at Jindong which is located on the most downstream. For the computation of evapotranspiration, the Morton method is adopted because this method is relatively fit best in the calculation of water balance among the Morton, Penman and Thornthwaite methods. The values of Morton evapotransp iration are corrected by the factor of 0.82 in the basin in order to bring the error to zero. The areal evapotranspiration is the arithmetic mean of the Morton estimates at the stations. Mean water balance components in the Nakdong river basin are 1117.0mm, 600.6mm and 516.4m for precipitation, runoff and evapotranspiration respectively. Accordingly, the mean runoff ratio comes out to be 0.54. The smallest values of runoff coefficient are due for Daegu area, while the largest ones are for the southwest of the basin with the higher rainfall and high elevations there. The amount of runoff obtained by both Thornthwaite and Budyko methods for water balance computations indicate 59 and 60 per cent of actual values which are lower than the expected. An attempt is made to find the best reliable rainfall-runoff relation among the four methods proposed by Schreiber, 01'dekop, Budyko and Sellers. The modified equation of Schreiber type for annual runoff coefficient could be obtained with the smallest mean error of 11 per cent.

  • PDF

Characteristics of the Sedimentary Environment in Yoja Bay in the Summer of 1998 (1998년 하계 여자만의 저질환경 특성)

  • 허회권;김도현;안승환;박경원
    • Korean Journal of Environmental Biology
    • /
    • v.18 no.2
    • /
    • pp.227-235
    • /
    • 2000
  • As a part of basic investigation to Fishery Purge Project for the Special Administrative in Chollanamdo Province, the sedimentary environmental characteristics of Yoja Bay at 15 stations were studied. The analysis was carried out in July, 1998, through studies of Loss On Ignition (LOI) by depth, Total Sulfide (T-5), Chemical Oxygen Demand (COD) concentrations and Grain-size distribution. The LOI value was found to be 6.20-12.20% (mean of 8.89%), with the neighboring Sunhakri and Haksanri areas showing slightly higher values. These values were similar to the LOI values observed in the Hansan-Koje Bay and Jinju Bay areas on the southern coast of Korea. T-S and COD concentrations were found to be, respectively, 0.060-0.104 mg/gㆍd (mean of 0.052 mg/gㆍd) and 5.53-29.71 mg/gㆍd(mean of 13.24 mg/gㆍd), not exceeding eutrophication limits. T-S concentration was especially high at stations close to the central areas of the bay and inland areas, which caused by organic matter input from the nearby agricultural areas. COD concentration was very high at stations nearby the bay entrance and Doonbyungdo, but the mean value was lower than that of Hansan-Koje Bay. This leads us to believe that the level of pollution in Yoja Bay is not significant. The prevailing sediment composition was mud, consisting of 61.38% silt and 34.87% clay. [Sediments in Yoja Bay, Loss On Ignition, Total Sulfide, Chemical Oxygen Demand, Grain-Size Distribution].

  • PDF

Nonpoint Pollutants Sources Characteristics of Initial Surface Runoff on the Land Use Types (토지이용별에 따른 초기강우 유출량의 비점오염물 특성 분석)

  • Choi, Yun-Yeong;Jung, Se-Young;Choi, Jeong-Woo
    • Journal of Environmental Science International
    • /
    • v.20 no.3
    • /
    • pp.417-426
    • /
    • 2011
  • This study was conducted to investigate runoff characteristics of non-point pollutants source at the urban and rural zones in sangju area. The monitoring was conducted with seven events for ten months and Event mean Concentration(EMC) and First Flush Effect(FFE) of SS and BOD were calculated on the result of the water quality parameters. During rainfall event, the peak concentrations of SS and BOD were observed after 3~4 hours of rainfall in rural areas. Whereas, the peak concentrations occurred within 1~2 hours after rainfall and then the highest concentration of NPS pollutants sharply decreased, showing strong first flush effect in urban areas. The cumulative load curves for NPS pollutants showed above the $45^{\circ}$ straight line, indicating that fist flush effect occurred in urban areas. The mean SS EMC values of rural areas ranged from 0.9~3.3mg/L, it was higher value when compare to urban areas. While the mean BOD values of urban areas were shown the highest values.

Studies on hematologic values and types of blood protein in Jindo dogs I. Hematologic values of Jindo dogs (진도견(珍島犬)의 혈액상(血液像)과 혈액단백질형(血液蛋白質型)에 관(關)한 연구(硏究) I. 진도견(珍島犬)의 혈액상(血液像))

  • Kim, Woo-kwon;Han, Bang-keun;Kim, Ja-suk
    • Korean Journal of Veterinary Research
    • /
    • v.28 no.2
    • /
    • pp.285-297
    • /
    • 1988
  • The present study was conducted in order to get the normal hematologic values of Korean Jindo dogs. Blood samples were taken from 328(♂ 92, ♂ 236) healthy Jindo dogs in Jindo area. The results obtained in this study were summarized as follows: 1. The mean values of red blood cell(RBC) count, hemoglobin(Hb) content and packed cell volume(PCV) in the age group of less than one year were 6.77(♂ 6.80, ♂ 6.76)${\times}10^6/{\mu}l$, 13.14 (♂ 13.53, ♂ 12.99)g/100ml and 43.28(♂ 44.47, ♂ 42.79)ml/100ml, respectively, whereas the RBC count, Hb content and PCV in the age group of one year and more were 7.42(♂ 7.44, ♂ 7.42)${\times}10^6/{\mu}l$, 14.98(♂ 15.56, ♂ 14.76)g/100ml and 47.18 (♂ 48.43, ♂ 46.71)ml/100ml, respectively. The values of RBC count, Hb content and PCV appeared to be higher in the male than in the female and it increased with aging in the age group of less than one year. 2. The mean values of mean corpuscular volume(MCV), mean corpuscular hemoglobin(MCH) and mean corpuscular hemoglobin content(MCHC) in the age group of less than one year were 63.93(♂ 65.40, ♂ 63.30)fl, 19.41(♂ 19.90, ♂ 19.22) pg and 30.36(♂ 30.43, ♂ 30.36)g/100ml respectively, whereas the MCV, MCH and MCHC in the age group of one year and more were 63.58(♂ 65.09, ♂ 62.95)fl, 20. 19(♂ 20.91, ♂ 19.89) pg and 31.75(♂ 32.13, ♂ 31.60)g/100ml respectively. The values of MCV, MCH and MCHC appeared to be higher in the male than in the female. No differences were found in the MCV and MCH between age groups. The MCHC appeared to be higher in older age group. 3. The mean values of white blood cell(WBC) count in the age group of less than one year were 14,356(♂ 13,878, ♂ 14,551)/${\mu}l$, whereas the values of WBC count in the age group of one year and more were 13,394(♂ 12,656, ♂ 13,672)/${\mu}l$. The WBC count appeared to be higher in the female than in the male. No differences were found between age groups in the WBC count. 4. In WBC differential count the mean percentage of lymphocyte, monocyte, neutrophil and eosinophil of the age group less than one year were 33.45(♂ 31. 64, ♂ 34.18), 2.77(♂ 3.00, ♂ 2.68), 57.40(♂ 58.18, ♂ 57.08) and 6.38(♂ 7.18, ♂ 6.06)% respectively, while those of the age group one year and more were 30. 22(♂ 28.38, ♂ 30.90), 3.03(♂ 3.23, ♂ 2.95), 60.93(♂ 63.34, ♂ 60.03) and 5.82(♂ 5.04, ♂ 6.11)% respectively. Lymphocyte count appeared to be higher in the female and in the age group below one year than in the male and in the age group of one year and more, whereas the reverse was the case with neutrophil and monocyte counts. 5. Mean platelet count in the age group of less than one year was 377,391(♂ 398,778, ♂ 368,721)/${\mu}l$, whereas mean platelet count in the age group of one year and more was 354,657 (♂ 373,660, ♂ 347,512)/${\mu}l$. The platelet count appeared to be higher in the male than in the female and especially lower in the age group of three years and more($305,513/{\mu}l$) than in the other age groups.

  • PDF

Characteristics of Atmospheric Respirable Particulate Matters and Trace Elements within Industrial Complex and Residential Sites in an Industrial City (산업 도시의 산업단지 부지와 주거 지역의 대기 중 호흡성 분진과 구성 미량 원소의 특성)

  • Kim, Mo-Geun;Shin, Seung-Ho;Jo, Wan-Kuen
    • Environmental Analysis Health and Toxicology
    • /
    • v.25 no.1
    • /
    • pp.27-40
    • /
    • 2010
  • The current study was designed to scientifically evaluate the atmospheric particulate pollution in residences relative to their proximity to a Korean major iron/metal industrial complex (IMIC). This objective was achieved by measuring the concentrations and elemental composition of particulate matter with aerodynamic diameters equal to or less than 10 ${\mu}m$(PM10) in industrial ambient air from IMIC and residential ambient air with relative proximities to IMIC. The trace metals were analyzed using an inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The industrial mean values exceeded the Korean year/70-${\mu}g/m^3$ standard for PM10, whereas the residential mean values did not. However, the maximum residential values did exceed or were close to the Korean PM10 year standard. For individual elements, the ambient concentrations ranged widely from values in the order of a few $ng/m^3$ to thousands of $ng/m^3$. The residential mean mass concentrations in the PM10 measured in the present study were higher than or similar to those reported in earlier studies. This study suggests that residents in neighborhoods near the IMIC are exposedto elevated particulate levels compared to residents living further away from such a source.

Channel Coding Algorithm using Absolute Mean Values for the Difference Values of Soft Output in Digital Mobile Communication System (디지털 이동통신 시스템에서 연판정 출력의 차이값에 대한 절대평균값을 이용한 채널부호화 알고리즘)

  • Jeong, Dae-Ho;Kim, Hwan-Yong;Lim, Soon-Ja
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.10
    • /
    • pp.67-74
    • /
    • 2007
  • Turbo code, a kind of channel coding technique, has ben used in the field of digital mobile communication system if the number of iterations is increased in the several channel environments, my further iteration results in very little improvement, and requires much delay and computation in proportion to the number of iterations. In this paper, it proposes an efficient stopping rules for the iteration process in turbo decoding. By using absolute mean values for the LLR difference values between the first and second decoder in the present decoding process, the proposed algorithm can largely reduce the average number of iterations without BER performance degradation in all SNR regions. As a result of simulation, the average number of iterations of proposed algorithm is reduced by about $18.25%{\sim}20.58%$ compared to SDR algerian in the lower SNR region, and is reduced by about $22.96%{\sim}28.74%$ compared to method using variance values of extrinsic information in the upper SNR region.

Economic Selection of Optimum Process Mean for a Mixture Production Process (혼합물 생산공정의 최적 공정평균의 경제적 선정)

  • Lee, Min-Koo
    • Journal of Korean Society for Quality Management
    • /
    • v.33 no.4
    • /
    • pp.111-116
    • /
    • 2005
  • This paper considers the problem of optimally choosing the sub-process means of a mixture production process where two important ingredients are mixed. The quantity of each ingredient is controlled through each corresponding sub-process. The values of the sub-process mean directly affect the defective rate, production, scrap and reprocessing costs for the mixture production process. After inspecting every incoming item, each conforming item is sold in a regular market for a fixed price and any nonconforming item is scraped. A model is constructed on the basis of the selling price, production, inspection, and scrap and reprocessing costs. The goal is to determine the optimum sub-process mean values based on maximizing expected profit function relating selling price and cost components. A method of finding the optimum sub-process means is presented when the quantities of the two ingredients are assumed to be normally distributed with known variances. A numerical example is given and numerical studies are performed.

2D Shape Recognition System Using Fuzzy Weighted Mean by Statistical Information

  • Woo, Young-Woon;Han, Soo-Whan
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 2009.01a
    • /
    • pp.49-54
    • /
    • 2009
  • A fuzzy weighted mean method on a 2D shape recognition system is introduced in this paper. The bispectrum based on third order cumulant is applied to the contour sequence of each image for the extraction of a feature vector. This bispectral feature vector, which is invariant to shape translation, rotation and scale, represents a 2D planar image. However, to obtain the best performance, it should be considered certain criterion on the calculation of weights for the fuzzy weighted mean method. Therefore, a new method to calculate weights using means by differences of feature values and their variances with the maximum distance from differences of feature values. is developed. In the experiments, the recognition results with fifteen dimensional bispectral feature vectors, which are extracted from 11.808 aircraft images based on eight different styles of reference images, are compared and analyzed.

  • PDF

A Study on the Content of Total Mercury in the Head Hair of Dental Personnel (치과계 종사자의 두발중 총 수은 함량에 관한 연구)

  • 이택승;손동헌
    • YAKHAK HOEJI
    • /
    • v.23 no.1
    • /
    • pp.17-29
    • /
    • 1979
  • The total mercury content in the head hair of 87 dental personnel and 210 Seoul citizens as control was determined. 1) The mean value of mercury content in dentists (8.57ppm) was 3.3 times of Seoul male citizens (2.57ppm) and the median of the former (5.92 ppm) was higher than that of the latter (2.39ppm) by approximately 2.5 times. 2) The mean value of mercury content in dental nurses (5.79ppm) was 2.8 times of Seoul female citizens(2.11ppm) and the median of the former(4.62ppm) was higher than that of the latter (1.86ppm) by approximately 2.5 times. 3) The mean value of mercury content in Seoul citizens was 2.29ppm and the median was 1.98ppm. 4) There was no correlationship between the mercury content in the head hair of dentists and the length of dental surgery experience or the frequency of amalgam fiillings per day. 5) The mercury content of Seoul citizens was higher in the male than in the female. 6) It appears more meaningful to employ median values than mean values when the environmental pollution is considered.

  • PDF