• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.654-660
• /
• 1991

Natural convection heat transfer in a horizontal annulus from an inner tube with two vertical fins has been studied for the effects of dimensionless fin length and Rayleigh number. The maximum local Nusselt number of inner tube was obtained at .theta. = 145.deg. and that of outer cylinder at .theta. = 0.deg. for the case of $l_{F}$=0.3 Local Nusselt number distributions for the lower fins show higher values than that of the upper fins. The mean Nusselt number of inner tube was increased with the values of dimensionless fin length. The mean Nusselt number can be represented in an exponential function of Grashof number at various fin lengths. As compared with experimental and numerical results, isotherms and local Nusselt number show good agreement.t.

• Korean Management Science Review
• /
• v.15 no.1
• /
• pp.33-47
• /
• 1998

The facility location problem considered here is to determine facility location sites under future's uncertain demand. The objective of this paper is to propose a solution method and algorithm for a two-stage stochastic facility location problem. utilizing the Benders decomposition method. As a two-stage stochastic facility location problem is a large-scale and complex to solve, it is usually attempted to use a mean value problem rather than using a stochastic problem. Thus, the other objective is to study the relative error of objective function values between a stochastic problem and a mean value problem. The simulation result shows that the relative error of objective function values between two problems is relatively small, when a feasibility constraint is added to a facility location model.

• Korean Journal of Veterinary Research
• /
• v.8 no.2
• /
• pp.59-64
• /
• 1968

The serum and erythrocyte cholinesterase activity and their seasonal variations were determined with 8 males of healthy Korean cattles during one year period from September, 1966 to august, 1977. The results obtained were as follows : 1. The serum cholinestrase activity showed a range of 0.64mg/hr/ml to 8.26mg/hr/ml with a mean value of $3.69{\pm}0.25mg/hr/ml$. There was highly significant differences in the seasonal variations. 2. The erythrocyte cholinesterase activity ranged from 29.78mg/hr/ml to 48.88mg/hr/ml with a mean value of $38.37{\pm}1.11mg/hr/ml$. Seasonal variations was not found to be significant. 3. The results showed that the serum cholinesterase activity of Korean cattle had great variations among individual values and significant seasonal variations. On the other hand, cholinesterase activity of erythrocyte showed a little variations among individual values and no significant seasonal variations.

• Journal of Environmental Science International
• /
• v.6 no.1
• /
• pp.33-44
• /
• 1997

In investigating heavy metal contents at specific areas, the method of selecting sampling points is Important A general method is, according to the law , random sampling of zigzag-form in the selected field. In this work, we studied whether the measured values obtained from a certain method of selecting sampling points is a representative of heavy metal contents in the selected field or not. The selected field for this study is located on the lower Yangsan-river: Gasan-li, Mulgum-myon, Yangsan-gun, KyoungNam, 1 km away from the mi, h stream of Nakdong river. The heavy metals investigated were Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn. The inductively coupled plasma(ICPI atomic emission spectrometer was used to measure these metals quantitatively. The number of total sampling points were 24. We compared the total mean values with the mean obtained from various methods of selecting sampling points.

• Speech Sciences
• /
• v.12 no.2
• /
• pp.121-128
• /
• 2005

This study was an attempt to determine acoustic characteristics in myna bird's notes. Two myna birds' sounds imitating a normal male voice in his late 20's were sampled and analyzed. The analyses included the mean values of F1, F2, F3 and pitch contours. The results were as follows; First, there was a significan difference in the mean values of F1, F2, and F3 in isolatd vowel /a/ and /i/ between the myna birds' sounds and the human voice. However, there was no apparent difference in pitch contour of their formants. Second, there was a difference in pitch contour of their formants in their sentence ('hn-nyung-ha-se-yo?' meaning 'How are you?') production. Namely, the myna birds' pitch contour was located higher than that of the human's.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.12
• /
• pp.737-740
• /
• 2005

This paper describes the possibility of evaluating and classifying arthritic pathology using the acoustical analysis of knee joint sound. Six normal subjects and 11 patients with knee problems were enrolled. Patients were divided into the 1st patient group which required an orthopeadic surgery and the 2nd patient group of osteoarthritis. During sitting and standing periods, subjects' active knee flexion and extension were monitored. Fundamental frequency, mean amplitude of pitch, jitter and shimmer were analyzed according to the position. The results demonstrate that the values of fundamental frequency, jitter and shimmer of the 2nd patient group were larger than others and changed unstably. The values of the standing position were larger than the sitting position.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.663-669
• /
• 2011

This paper examines methods to estimate torque and angle in shoulder flexion from surface electromyography(sEMG) signals for intuitive and delicate control of robotic assistance device. Five muscles on the upper arm, three for shoulder flexion and two for shoulder extension, were used to offer favorable sEMG recording conditions in the estimation. The methods tested were the mean absolute value (MAV) with linear regression and the artificial neural network (ANN) method. An optimal condition was sought by varying combination of muscles used and the parameters in each method. The estimation performance was evaluated using the correlation values and normalized root mean square error values. In addition, we discussed their possible use as an estimation of motion intent of a user or as a command input in a physical human-machine interaction system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1197-1199
• /
• 2016

Background: This study aimed to facilitate decision-making in cases of breast cancer radiotherapy shifts by simulating millimetric shifts and analyzing their effects on dose distribution. Methods: The study included 30 patients with left side breast cancer who were treated with three dimensional conformal radiotherapy (3D-CRT) in the Radiation Oncology Department in Hatay Public Hospital, between January 2013 and April 2015. A treatment plan shifting at three axes with six different measures was simulated. Results: The biggest difference in values was (+3mm shift) 476cGy, with a 7.7 % change for heart and 25.6% for spinal cord. The shifts in values respectively for CTV min, mean, max were -4.8%, 2.5%, 4%. The differences for lymphatic min, mean, max were 21.3%, 20.3%, -12.2%. Conclusion: The most important thing is not the treatment plan quality, but its practicality. The treatment plan must be practical and its practice must be controlled rigidly.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.171-175
• /
• 1999

the high temperature deformation behavior of 304 stainless steel was characterized by the hot torsion test. Continuous deformation was carried out at the temperature ranges 900-110$0^{\circ}C$ and the strain rate ranges 5x10-2~5/sec. The formulation of the flow stress curves was developed as subtraction form which was based on dynamic softening mechanisms The volume fraction of dynamic recrystallization and the mean grain size could be expressed as a function of deformation variables temperature (T) strain ($\varepsilon$) strain rate ($\varepsilon$) The calculated values of flow stress and mean grain size could be well matched with experimental values.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.2
• /
• pp.16-23
• /
• 1998

This paper examines the effects of specimen length and grade on the strength and stiffness properties of structural timber of radiata pine. The tensile strength and modulus of elasticity of 1,902 machine-graded boards with 3.15- and 1.62-m clear span lengths, were determined using a horizontal tension test machine. The mean failure and characteristic stress values for tensile strength show an extremely high dependency on test specimen length. The mean and characteristic values of both modulus of elasticity and tensile strength show significant dependency on machine stress grades.