• Industrial Engineering and Management Systems
• /
• v.12 no.3
• /
• pp.281-287
• /
• 2013

In this paper, we introduce a roots method that uses the roots inside the unit circle of the associated characteristics equation to evaluate the steady-state system-length distribution at three epochs (pre-arrival, arbitrary, and post-departure) and sojourn-time distribution in GI/PH/1 queueing model. It is very important for an air base to inspect airplane oil because low-quality oil leads to drop or breakdown of an airplane. Since airplane oil inspection is composed of several inspection steps, it sometimes causes train congestion and delay of inventory replenishments. We analyzed interarrival time and inspection (service) time of oil supply from the actual data which is given from one of the ROKAF's (Republic of Korea Air Force) bases. We found that interarrival time of oil follows a normal distribution with a small deviation, and the service time follows phase-type distribution, which was first introduced by Neuts to deal with the shortfalls of exponential distributions. Finally, we applied the GI/PH/1 queueing model to the oil train congestion problem and analyzed the distributions of the number of customers (oil trains) in the queue and their mean sojourn-time using the roots method suggested by Chaudhry for the model GI/C-MSP/1.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.7
• /
• pp.868-876
• /
• 2014

The objective of this study is focused on the analyzing combustion, carbon monoxide and hydrocarbon emission characteristics of marine diesel oil, utilized for naval propulsion engine, with varying pre-post injection timing of an optically accessible single cylinder engine. And also the combustion process is analyzed by means of a high speed camera visualization. On the result of retarding pre-injection timing toward main injection timing, the mean effective pressure and maximum pressure of combustion chamber are increased; however, the heat release rate is decreased. Furthermore, the emission rates of carbon monoxide and hydrocarbon are reduced in this case. In hence, when a post-injection timing is advanced, the mean effective pressure and maximum pressure are increased, because the combustion has been performed under the high temperature and high pressurized environment during main injection time, and the emission rates of carbon monoxide and hydrocarbon are increased. From the experimental results, it considered that retarding of pre-injection timing affects to shorten the ignition delay of main injection clearly, and to raise the flame intensity comparing to the advanced state. The ignition delay during post-injection is not appeared at any post-injection time, but the flame intensity has been weakened gradually according to the retarding of post-injection timing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.4
• /
• pp.555-562
• /
• 2022

This study measured and analyzed the propagation characteristics at frequencies 6, 10, and 17 GHz to discover the new propagation demands in a semi-basement indoor corridor environment for meeting the 4th industrial revolution requirements. The measured indoor environment is a straight corridor consisting of three lecture rooms and glass windows on the outside. The measurement scenario development and measurement system were constructed to match this environment. The transmitting antenna was fixed, and the frequency domain and time domain propagation characteristics were measured and analyzed in the line-of-sight environment based on the distance of the receiving antenna location. In the frequency domain, reliability was determined by the parameters of the floating intercept (FI) path loss model and an R-squared value of 0.5 or more. In the time domain, the root mean square (RMS) delay spread and the cumulative probability of K-factor were used to determine that 6 GHz had high propagation power and 17 GHz had low propagation power. These research results will be effective in providing ultra-connection and ultra-delay artificial intelligence services for WIFI 6, 5G, and future systems in a semi-basement indoor corridor environment.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.5 no.4
• /
• pp.18-29
• /
• 1994

In this paper, the performance of stepped serial search scheme and matched filter scheme for code acqusition in FH / CDMA are evaluated under land mobile radio communication channel environments. And delay lock loop scheme is used as code tracking system. As the results for code acquisition system, it is shown that the performance of stepped searial scheme is superior to matched filter scheme, because system complexity is reduced and system performance is improved by increasing the hopping frequency not to substitute for special hardware. Also, it is shown that its performance is improved under Rayleigh/ Rician fading environments. As the results for code tracking system, it is found that mean hold time is increased due to the increase of the number of lock state and hopping frequency, M.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.72-85
• /
• 1998

In this paper, we propose a new method that sequentially estimates TDOA(Time Delay Of Arrival) and FDOA(Frequency Delay Of Arrival) for extracting the information about the bearing and relative velocity of a target in passive radar or sonar arrays. The objective is to efficiently estimate the TDOA and FDOA between two sensor signal measurements, corrupted by correlated Gaussian noise sources in an unknown way. The proposed method utilizes the one dimensional slice function of the third order cumulants between the two sensor measurements, by which the effect of correlated Gaussian measurement noises can be significantly suppressed for the estimation of TDOA. Because the proposed sequential algoritjhm uses the one dimensional complex ambiguity function based on the TDOA estimate from the first step, the amount of computations needed for accurate estimationof FDOA can be dramatically reduced, especially for the cases where high frequency resolution is required. It is demonstrated that the proposed algorithm outperforms existing TDOA/FDOA estimation algorithms based on the ML(maximum likelihood) criterionandthe complex ambiguity function of the third order cumulant as well, in the MSE(mean squared error) sense and computational burden. Various numerical resutls on the detection probability, MSE and the floatingpoint computational burden are presented via Monte-Carlo simulations for different types of noises, different lengths of data, and different signal-to-noise ratios.

• Clinical Endoscopy
• /
• v.55 no.1
• /
• pp.128-135
• /
• 2022

Background/Aims: Recent reports suggest that the biliary self-expandable metallic stent (SEMS) is highly effective for maintaining hemostasis when endoscopic hemostasis fails in endoscopic retrograde cholangiopancreatography (ERCP)-related bleeding. We compared whether temporary SEMS offers better efficacy than angioembolization for refractory immediate ERCP-related bleeding. Methods: Patients who underwent SEMS placement or underwent angioembolization for bleeding control in refractory immediate ERCP-related bleeding were included in the retrospective analysis. We evaluated the hemostasis success rate, severity of bleeding, change in hemoglobin levels, amount of transfusion, and delay to the start of hemostasis. Results: A total of 27 patients with SEMS and 13 patients who underwent angioembolization were enrolled. More transfusions were needed in the angioembolization group (1.0±1.4 units vs. 2.5±2.0 units; p=0.034). SEMS failure was successfully rescued by angioembolization. The partially covered SEMS (n=23, 85.1%) was generally used, and the median stent-indwelling time was 4 days. The mean delay to the start of angioembolization was 95.2±142.9 (range, 9-491) min. Conclusions: Temporary SEMS had similar results to those of angioembolization (96.3% vs. 92.3%; p=0.588). Immediate SEMS insertion is considered a bridge treatment modality for immediate refractory ERCP-related bleeding. Angioembolization still has a role as rescue therapy when SEMS does not work effectively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.759-765
• /
• 2016

Background: Breast cancer is the most frequent cancer of women in Pakistan with the majority presenting with stage III or IV lesionsat initial diagnosis. Patient and health system related factors are well known determinants of delay in presentation and diagnosis. Additionally, breast cancer being a heterogeneous disease, the various molecular subtypes featuring different aggressiveness also need to be considered. The present study evaluated the association of stage at initial diagnosis of breast cancer with these two factors in local women at a tertiary level health care facility in Lahore, Pakistan. Materials and Methods: Patient and tumor features were recorded separately during diagnostic workup in Breast Clinics at INMOL and at Services Hospital, Lahore. Data were entered in MS Excel and analyzed by descriptive statistics and Chi-Square test. Results: Among the 261 patients, 64% were staged as late breast cancer (LBC), the mean age was 46.8 with standard deviation of 13 years. Some 92% had invasive ductal carcinoma (IDC), 61% had luminal types (LT) of non-aggressive tumor while 39% had the non-luminal types (NLT) of of HER2-enriched or basal aggressive tumors. While 70% of patients presented within one year of symptomatic disease (early report group "ERG"), 30% reported after a mean delay of 4 years with a standard deviation of 3.75 years. The stage distribution among ERG patients was not statistically different from those reporting late (P=0.123). Statistically larger proportion of patients with NLT presented as LBC as compared to the LT (P =0.034). Among the ERG, statistically different stage distribution of disease was observed for the NLT versus LT (P=0.047). Among those presenting late, this difference was insignificant (P=0.416). Conclusions: Breast cancer is a distinct disease in Pakistan with a high frequency of aggressive molecular types affecting younger women, with the majority presenting as LBC. Association of NLT with higher stage at diagnosis is statistically significant whereas time delay in diagnosis is not. Further research is required to define the risk profile and features in local patients. The burden of LBC can be reduced by promoting breast health awareness and by establishing easily accessible dedicated breast care set ups in the hospitals.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.34-40
• /
• 2018

In this study, the optimal buffer size is calculated for seamless video playback on a mobile device. Buffer means the memory space for multimedia packet which arrives in mobile device for video play such as VOD service. If the buffer size is too large, latency time before video playback can be longer. However, if it is too short, playback service can be paused because of shortage of packets arrived. Hence, the optimal buffer size insures QoS of video playback on mobile devices. We model the process of buffering into a discret-time queueing model. Mean busy period length and mean waiting time of Geo/G/1 queue with N-policy is analyzed. After then, we uses the main performance measures to present numerical examples to decide the optimal buffer size on mobile devices. Our results enhance the user satisfaction by insuring the seamless playback and minimizing the initial delay time in VOD streaming process.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.1-8
• /
• 1999

In order to provide appropriate Quality of Service(QoS) guarantee to each traffic flow in intergrated service networks, an efficient traffic scheduling algorithm as well as resource reservation must be adopted in host and transit routers. In this paper, a new efficient fair queueing algorithm which adopts a linearly increasing virtual time is presented. The proposed algorithm is fair and the maximum and mean delay guaranteed of each flow are less than those of the SCFQ(self clocked fair queueing) algorithm which is one of the most promising traffic scheduling algorithm, while providing low implementation complexity as the SCFQ scheme. And, it has the better isolation provided than SCFQ, which means that each flow is much less influenced by the violating traffic flows provided its allocated bandwidth gurantee. The fairness of the proposed algorithm is proved and simulation results of maximum and mean delay presented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.66-75
• /
• 2017

Priority disciplines are an important scheme for service systems to differentiate their services for different classes of customers. (N, n)-preemptive priority disciplines enable system engineers to fine-tune the performances of different classes of customers arriving to the system. Due to this virtue of controllability, (N, n)-preemptive priority queueing models can be applied to various types of systems in which the service performances of different classes of customers need to be adjusted for a complex objective. In this paper, we extend the existing (N, n)-preemptive resume and (N, n)-preemptive repeat-identical priority queueing models to the (N, n)-preemptive repeat-different priority queueing model. We derive the queue-length distributions in the M/G/1 queueing model with two classes of customers, under the (N, n)-preemptive repeat-different priority discipline. In order to derive the queue-length distributions, we employ an analysis of the effective service time of a low-priority customer, a delay cycle analysis, and a joint transformation method. We then derive the first and second moments of the queue lengths of high- and low-priority customers. We also present a numerical example for the first and second moments of the queue length of high- and low-priority customers. Through doing this, we show that, under the (N, n)-preemptive repeat-different priority discipline, the first and second moments of customers with high priority are bounded by some upper bounds, regardless of the service characteristics of customers with low priority. This property may help system engineers design such service systems that guarantee the mean and variance of delay for primary users under a certain bounds, when preempted services have to be restarted with another service time resampled from the same service time distribution.