• 한국태양에너지학회 논문집
• /
• 제23권3호
• /
• pp.23-28
• /
• 2003

The purpose of this study is to procure basic data to be used for solar power plant and concentrating collector designs. Site elevation is one of the major factors which influences the incoming insolation to the earth surface. Because the nonpermanent gases such as ozone, water vapor are unmixed components of the atmosphere and their concentrations are the function of height, the site elevation effects the relative proportion of the atmospheric constituents. We have measured solar radiation on Jiri Mt. (1,400m) and in Gurye area(115m) at the near same latitude. These values were then compared to obtain their characteristics and to investigate the potential for the solar utilization for both high and low elevated areas. From the experimental results, we concluded that 1) Daily mean horizontal global radiation and normal beam radiation on Mt. Jiri are 9.5%, and 35.3% higher than Gurye area respectively for a clear day. 2) A significant difference in atmospheric clearness index is observed between Mt. Jiri and Gurye areas.

• 대한원격탐사학회지
• /
• 제21권1호
• /
• pp.73-81
• /
• 2005

We construct improved geocentric digital elevation model (DEM), estimate tidal dynamics and ice stream velocity over Sulzberger Ice Shelf, West Antarctica employing differential interferograms from 12 ERS tandem mission Synthetic Aperture Radar (SAR) images acquired in austral fall of 1996. Ice, Cloud, and land Elevation Satellite (ICESat) laser altimetry profiles acquired in the same season as the SAR scenes in 2004 are used as ground control points (GCPs) for Interferometric SAR (InSAR) DEM generation. 20 additional ICESat profiles acquired in 2003-2004 are then used to assess the accuracy of the DEM. The vertical accuracy of the OEM is estimated by comparing elevations with laser altimetry data from ICESat. The mean height difference between all ICESat data and DEM is -0.57m with a standard deviation of 5.88m. We demonstrate that ICESat elevations can be successfully used as GCPs to improve the accuracy of an InSAR derived DEM. In addition, the magnitude and the direction of tidal changes estimated from interferogram are compared with those predicted tidal differences from four ocean tide models. Tidal deformation measured in InSAR is -16.7cm and it agrees well within 3cm with predicted ones from tide models. Lastly, ice surface velocity is estimated by combining speckle matching technique and InSAR line-of-sight measurement. This study shows that the maximum speed and mean speed are 509 m/yr and 131 m/yr, respectively. Our results can be useful for the mass balance study in this area and sea level change.

• 한국콘텐츠학회논문지
• /
• 제13권2호
• /
• pp.498-504
• /
• 2013

최근 기후변화에 의한 영향으로 태풍의 발생빈도가 증가하고 있으며 그 결과 산지하천의 경우 상류부의 유량증가와 하류부에 빈번한 수위상승을 가져오고 있다. 본 연구에서는 2012년 9월 17일~18일에 우리나라에 직접적인 영향을 준 태풍 산바의 영향으로 발생한 집중호우가 산지하천 하류부 수위 변동에 어떤 영향을 주는가를 분석하였다. 삼척 오십천 유역을 대상유역으로 선정하고 HEC-RAS모형을 적용하고 홍수위 분석을 실시하였다. 그 결과 2012년 측정된 관측수위와 HEC-RAS모형에 의해 모의된 수위가 유사한 결과를 나타냈으며 최대 홍수위는 5.32m, 평균유속은 2.33m/sec, 최대수로수심은 7.51m로 모의 되어 태풍산바에 의해 내린 집중호우가 오십천의 수위상승에 영향을 미친 것으로 판단되며, 향후 구축된 자료는 하천정비기본계획 수립시 수공구조물 설계에 기초자료로 유용하게 활용될 것으로 기대된다.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.343-350
• /
• 2021

Unmanned aerial vehicles(UAV) photogrammetry provides a cost-effective option for collecting high-resolution 3D point clouds compared with UAV LiDAR and aerial photogrammetry. The main objectives of this study were to (1) validate the accuracy of 3D site model generated, and (2) determine the differences between Digital Elevation Model(DEM) and Digital Surface Model(DSM). In this study, DEM and DSM were shown to have varying degree of accuracy from observed data. The results indicated that the model predictions were considered tend to over- and under-estimated. The range of RMSE of DSM predicted was from 8.2 and 21.3 when compared with the observation. In addition, RMSE values were ranged from 10.2 and 25.8 to compare between DEM predicted and field data. The predict values resulting from the DSM were in agreement with the observed data compared to DEM calculation. In other words, it was determined that the DSM was a better suitable model than DEM. There is potential for enabling automated topography evaluation of the prior-harvest areas by using UAV technology.

• 대기
• /
• 제32권3호
• /
• pp.179-189
• /
• 2022

The purpose of this study is to build and evaluate a high-resolution (50 m) KMAPP (Korea Meteorological Administration Post Processing) reflecting building data. KMAPP uses LDAPS (Local Data Assimilation and Prediction System) data to detail ground wind speed through surface roughness and elevation corrections. During the detailing process, we improved the vegetation roughness data to reflect the impact of city buildings. AWS (Automatic Weather Station) data from a total of 48 locations in the metropolitan area including Seoul in 2019 were used as the observation data used for verification. Sensitivity analysis was conducted by dividing the experiment according to the method of improving the vegetation roughness length. KMAPP has been shown to improve the tendency of LDAPS to over simulate surface wind speeds. Compared to LDAPS, Root Mean Square Error (RMSE) is improved by approximately 23% and Mean Bias Error (MBE) by about 47%. However, there is an error in the roughness length around the Han River or the coastline. Accordingly, the surface roughness length was improved in KMAPP and the building information was reflected. In the sensitivity experiment of improved KMAPP, RMSE was further improved to 6% and MBE to 3%. This study shows that high-resolution KMAPP reflecting building information can improve wind speed accuracy in urban areas.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.215-219
• /
• 2005

A macro spreadsheet model, WEANES (Wet Pond Annual Efficiency Simulation Model), has been developed to predict the long-term or annual removal efficiencies of wet retention/detention basins. The model uses historical, site-specific, multi-year, rainfall data, usually available from a nearby National Oceanic and Atmospheric Administration (NOAA) climatological station to estimate basin efficiencies which are calculated based on annual mass loads. Other required input parameters are: 1) watershed parameters; drainage area, pervious curve number, directly connected impervious area, and ti me of concentration, 2) pond parameters; control and overflow elevations, pond side slopes, surface areas at control elevation and pond bottom; 3) outlet structure parameters; 4) pollutant event mean concentrations; and 5) pond loss rate which is defined as the net loss due to evaporation, infiltration and water reuse. The model offers default options for parameters such as pollutant event mean concentrations and pond loss rate. The model can serve as a design, planning, and permitting tool for consulting engineers, planners and government regulators.

• 한국수자원학회논문집
• /
• 제30권3호
• /
• pp.225-233
• /
• 1997

부체의 장주기동요, 연안구조물과 계류선의 파괴 등과 같은 역기능으로 인해 파군현상의 정확한 해석은 시급한 과제라 하겠다. 본고에서는 연안계에서 발생하는 파랑과 가장 근접한 비선형불규칙 파랑계를 산정하여 해안구조물의 피로거동에 지대한 영향을 미치는 파군당 파랑의 수와 해안구조물의 first excursion failure mode를 결정하는 high run에서의 파랑수를 중심으로 파군현상을 해석하였다. 해석과정에 mapping technique과 유의파경사를 perturbation parameter로 섭동이론이 사용되었다. 해석결과 Gaussian wave계에서 균등분포하는 것으로 알려진 위상함수는 평균값 주위에 집중분포하였고, 그 정도는 비선형성이 증가할수록 심화되었다. threshold crossing rate의 경우 비선형성이 심화될수록 평균해수위보다 큰 쪽으로 분포형이 이동하였으며 파군당 파랑수와 high run에서의 파랑수도 비슷한 경향을 보여 최근 설치범위가 심해쪽으로 확대되는 해안구조믈의 경우 피로거동에 대한 보강이 요만된다.

• 한국농공학회논문집
• /
• 제55권1호
• /
• pp.39-48
• /
• 2013

The solar radiation is the primary energy source that drives many of the earth's physical and biological processes and climate change. Understanding its importance to the solar radiation observation is a key to understanding a broad range of natural processes, agricultural, energy and human activities. The purpose of this study is to estimate solar radiation using sunshine duration, and to estimate distribution of solar radiation using a topography factor considering surface slope and aspect in complex terrain. The result of regression analysis between ratio of solar radiation and sunshine duration from 2001 to 2010 shows high $R^2$ value of 0.878. Regression analyses indicated that topographic attributes including elevation, slope and aspect had significant effects on solar radiation. The variation of topographic factor with aspect and slope for the summer and winter are considered. The highest month of daily mean solar radiation at Jeju island appears in April of 20.61 $MJ{\cdot}m^{-2}{\cdot}day^{-1}$, and the lowest month appears in December of 6.90 $MJ{\cdot}m^{-2}{\cdot}day^{-1}$. These results provided useful quantitative information about the influence of topography on solar radiation in the island region.

• 대한원격탐사학회지
• /
• 제17권2호
• /
• pp.111-119
• /
• 2001

This study analyzes time variability of the normalized difference vegetation index (NDVI), the leaf area index (LAI) and surface temperature (Ts) estimated from AVHRR data collected from across the Korean peninsula from 1981 to 1994. In the present study, LAI defined as vegetation density, as a function of NDVI applied for the vegetation types and Ts defined by the split-window formulation of Becker and Li (1990) with emissivity of a function of NDVI, are used. Results of the inter-annual, intra-annual and intra-seasonal variabilities in Korea show: (1) Inter-annual variability of NDVI is generally larger in the southem and eastern parts of the peninsula than in the western part. This large variability results from the significant mean variation. (2) Inter-annual variability of Ts is larger in the areas of smaller NDVI. This result shows that the NDVI play a small role in emissivity. (3) Inter-annual variability of LAI is larger in the regions of higher elevation and urban areas. Changes in LAI are unlikely to be associated with NDVI changes. (4) Changes in NDVI and Ts are likely dominant in July and are relatively small in spring and fall. (5) Urban effect would be obvious on the time-varying properties of NDVI and Ts in Seoul and the northern part of Taejon, where NDVI decreases and Ts increases with a significant magnitude.

• 대한토목학회논문집
• /
• 제29권3B호
• /
• pp.247-257
• /
• 2009

본 연구에서는 흐름방향으로 식생 영역이 교차적으로 식재된 교행식생 수로에서의 3차원 수치모의를 수행하였다. 지배방정식에서의 난류 폐합을 위해 ${\kappa}-{\varepsilon}$ 모형을 적용하였으며, 수치모형은 Olsen(2004)이 개발한 3차원 모형을 이용하였다. 먼저, 3차원 수치모형을 이용하여 하상의 일부가 식재된 부분 식생 수로를 수치모의 하고, 계산된 적분유속 및 레이놀즈응력을 기존의 실험 결과와 비교하였다. 그 결과 본 모형이 식생 수로에서의 평균 유속 분포를 매우 잘 예측하는 것으로 나타났다. 그러나 ${\kappa}-{\varepsilon}$ 모형이 등방성 모형이므로 식생과 비식생 영역의 경계면 부근에서 발생되는 운동량 교환 효과를 정확히 예측할 수 없는 것으로 나타났다. 한편, 주흐름방향으로 식생 영역이 교차적으로 존재하는 교행식생 수로를 수치모의 하고, 계산된 유속 분포를 기존의 실험 결과와 비교한 결과, 계산 유속과 실험 결과가 매우 잘 일치하는 것으로 나타났다. 또한 다양한 밀도에 따른 유속 벡터도를 계산한 결과, 식생밀도가 증가함에 따라 식생이 흐름 방향을 변화 시켜 점차 만곡수로와 유사한 형태의 유속 벡터도를 갖는 것으로 나타났으며, 식생 밀도 ${\alpha}$가 9.97%인 경우에는 식생 반대 측벽 영역에서 재순환 흐름이 형성되는 것으로 나타났다. 한편, 식생 밀도에 따른 단면 유속 분포도 및 편수위 변화를 살펴보았다.