• Journal of the Korea Furniture Society
• /
• v.18 no.2
• /
• pp.147-151
• /
• 2007

This report explains the intervessel pit dimension of Populus tomentiglandulosa and its role in embolism repair according to proposed mechanism by Zwieniecki and Holbrook, 2000. It was found that mean contact angle ( ) of water droplets on the inner surface of vessels was $56^{\circ}$. Openings into the bordered pits were typically elliptical. The angle of the bordered pit chamber ($2{\alpha}$) was found $142.17^{\circ}$. From the capillary equation $Pmax\;=\;Gcos\;(\;+{\alpha})$, it was found that mathematically the maximum pressure 0.08MPa created by pits, can be employed to force the air within the embolized vessel into solution.

• Journal of the Korean Society for Railway
• /
• v.19 no.4
• /
• pp.409-416
• /
• 2016

The contact force characteristic between the pantograph and the catenary wire represents the current collection quality of trains; it should be precisely controlled under international standard. Recently, a noise reduction cover has been installed around the pantograph of high speed trains. However, little study on the contact force by the pantograph cover has been conducted. In this study, the impact on the current collection performance of the pantograph cover was analyzed by dynamic contact force measurement using a next generation high speed train (HEMU-430X). As a result, it was confirmed that the attachment of a pantograph cover could lower the mean contact force by approximately 50N at 300km/h. In addition, the pure difference of the average contact force by the presence of pantograph cover, except for the static pressure, was measured and found to be up to 110N at 300km/h. It was also found that the standard deviation of the contact force of 3~5N could be changed by use of a pantograph cover.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.129-136
• /
• 1997

The automated ball indentation(ABI) test was utilized to develop a semi-nondestructive method for estimating the fracture toughness( $K_{JC}$ ) in the transition temperature range. The key concept of the method is that the indentation deformation energy to the load at which the mean ball-specimen contact pressure reaches the fracture stress is related to the fracture energy of the material. ABI tests were performed for the reactor pressure vessel(RPV) base and weld metals at the temperatures of-15$0^{\circ}C$~$0^{\circ}C$ and the fracture toughness (estimated $K_{JC}$ ) was calculated from the indentation load-depth data. For all steels the temperature dependence of the estimated fracture toughness was almost the same as that ASTM $K_{JC}$ master curve The reference temperatures( $T_{o}$)of the steels were determined form the estimated $K_{JC}$ versus temperature curves. The reference temperature was well correlated with the index temperature of 41J Charpy impact energy( $T_{41J}$).).).

• 한국가스학회:학술대회논문집
• /
• 1997.09a
• /
• pp.78-85
• /
• 1997

Indentation and small punch tests are very powerful methods to monitor the materials reliability since they are very simple, easy and almost non-destructive. First, recently-developed continuous indentation test can provide the more material properties such as hardness, elastic modulus, yield strength, work-hardening exponent, etc., than the conventional hardness test. In our study, the true stress-strain curve was derived from the indentation load-depth curve for spherical indentation. In detail, the strain was able to be obtained from plastic depth/contact radius ratio, and the flow stress was from mean contact pressure through the analysis of elastic-plastic indentation stress field. Secondly, the small punch test was studied to evaluate the fracture toughness and defomation properties such as elastic modulus and yield strength. Like the indentation test, this test can be applied without severe damage of the target structure.

• PNF and Movement
• /
• v.15 no.3
• /
• pp.343-351
• /
• 2017

Purpose: This study aimed to suggest effective lunge exercise methods for various purposes by comparing differences in the muscle activity of thigh and plantar pressure according to changes in base of support during lunge exercises. Methods: The subjects were 20 college students who agreed to participate in the experiment. They performed three types of lunges-a basic lunge (BL), wide lunge (WL), and narrow lunge (NL). In a static position during each lunge, the muscle activity of the thigh and plantar pressure were measured. Each movement was maintained for 7 seconds, and the muscle activity for the 3 seconds in the middle was measured and analyzed. The plantar pressure was divided into six areas for analysis. The subjects randomly performed the lunges to prevent the influence of an experimental sequence. Each movement was performed three times, and the mean value of the three measurements was analyzed. Results: The analysis of muscle activities in the thigh during the three lunge movements showed statistically significantly higher muscle activity of biceps femoris in WL and NL than BL. Moreover, the analysis of plantar force showed statistically significant differences between BL and WL and WL and NL on the medial-forefoot and medial-midfoot, as well as between BL and WL and BL and NL on the lateral-midfoot. The analysis of plantar contact pressure exhibited statistically significant differences between BL and NL and WL and NL on the medial-forefoot, as well as a statistically significant difference between WL and NL on the medial-midfoot and lateral-hindfoot. Conclusion: This study suggests that changing the base of support during lunges can be useful to suit the purposes of various rehabilitation programs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.39-46
• /
• 2006

The fuel cell is one of promising environment-friendly energy sources for the next generation. The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials for bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity To achieve desired electrical properties, specimens made with different mixing ratio, processing pressure and temperature were tested. To increase mechanical strength, one or two layers of woven carbon fabric were added to the graphite and resin composite. Thus, the composite material was consisted of three phases: graphite particles, carbon fabric, and epoxy resin. By increasing mixing ratio of graphite, fabricated pressure and process temperature, the electric conductivity of the composite was improved. The results of tensile test showed that the tensile strength of the two-phase graphite composite was about 4MPa, and that of three-phase composite was increased to 57MPa. As surface properties, contact an91e and surface roughness were tested. Graphite composites showed contact angles higher than $90^{\circ}$, which mean low surface energy. The average surface roughness of the composite specimens was $0.96{\mu}m$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.2
• /
• pp.223-231
• /
• 2010

Purpose : The Purpose of this study was to compare muscle activation and foot pressure on baby carrier and sling for baby care. Methods : Thirty one women subjects (mean age 23.2 years) participated in four static conditions : unloaded quite standing, carrying an anterior baby carrier, carrying a posterior baby carrier, and sling. The baby carrier and sling were loaded with baby model that filled 7.6kg loads. Surface electromyography was used to measure activity in the internal oblique, T4, L3, L5 paraspinal muscle, vastus medialis, biceps femoris, tibialis anterior, and gastrocnemius for four conditions. And foot pressure was measured by using MatScan system(Tekscan, USA). Results : The activation of Biceps femoris, T4, L3, and L5 paraspinal muscle were significant differences(p<.05), but other muscles were no significant differences in four conditions(p>.05). Right foot contact area and peak pressure of right mid foot area were significant differences in four conditions(p<.05). Conclusion : The results of this study indicate that the use of baby carrier of sling for baby care were influenced postural responses of young women. Further work is recommended to find out the influences of various assistive devices for baby care.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.3
• /
• pp.189-198
• /
• 2021

Objective: The aim of this study is to investigate the effect of biomechanical variables on gait according to indoor and outdoor environmental conditions in elderly women at risk of falling. Method: 26 elderly women aged 70 years or older, and consisted of 13 elderly people with a walking speed of less 1.0 m/s and 13 people in the fall risk group as normal groups. Depending on the purpose of the study, physical examination and psychological questionnaire were prepared, and then walking was performed in an indoor/outdoor environment, and the gait pattern, muscle activity, and plantar pressure results were compared and analyzed in the elderly females through a 2 group × 2 environment 2-way repeted ANOVA analysis. Results: The gait variable showed an interaction effect the cadence. The muscle variables showed interaction effects in the rectus femoris and tibialis anterior muscles, and the interaction effects of the plantar pressure variables were confirmed in the forefoot and midfoot of the contact area, and the midfoot of the mean pressure. Conclusion: These results indicate that both groups are exposed to falls risk when gait in an outdoor environment, but the fall risk group has a higher risk of falls in both the gait pattern, muscle activity, and plantar pressure variables. The results of this study are considered to be helpful as basic data and development of exercise programs to prevent falls.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.109-112
• /
• 1997

The Hydrodynamic performance of the trileaflet polymer prosthetic valves depends on the design of the leaflet and the physical properties of the leaflet membrane. In order to study the effect of leaflet membrane elasticity on the hemodynamic performance of trileaflet prosthetic valve, leaflet membranes are manufactured using two different polymers - Biospan and Tecoflex SG-93A. The hemodynamic performance parameters are measured under steady and physiological pulsatile flow, and compared with monoleaflet polymer valve(floating valve) and bileaflet mechanical valve(St. Jude Medical valve). Well designed trileaflet valve shows the lowest mean pressure drop among the tested valves. The trileaflet valves with Biospan membrane show lower pressure drop and back low comparing to those with Tecoflex membrane. More elastic membrane may provide wide opening area during systole and close membrane ree edge contact during diastole. Durability of trileaflet valves are also tested in vitro. Trileaflet valves with non-uniform membrane thickness ail within 17 days because of stress concentration. Trileaflet polymer valves with uniform membrane thickness perform well over 55 days without failure.