• 한국의류산업학회지
• /
• 제14권3호
• /
• pp.454-464
• /
• 2012

In this study, fitness tests for slacks were divided into shape fitness test and motion fitness test, and the fitness test conditions for slacks were designed as the first step for standardization of measuring scales. Shape fitness test consisted of analyzing the parameters of appearance sensory tests as described in preceding studies, performing a simulated appearance sensory test, collecting and considering apparel experts' opinions about the test parameters, and establishing test conditions in terms of test regions, descriptions and faces. For the regions of the abdomen, hip, crotch, thighs, and knees, the parameter of unnecessary wrinkle/stretch was observed from the anterior and posterior body, and then evaluated; for waist, hip, crotch, knee and hem circumference, the parameters of ease and horizontality were observed from the anterior body and posterior body followed by evaluation; and, at the levels of waist, hip, crotch, knee and hem circumference, the division of the lateral line were observed from the lateral body followed by evaluation. Motion fitness test was composed of reviewing and analyzing comparatively the methods of motion fitness tests as mentioned in preceding studies, and establishing test conditions in terms of test motions and test regions. For each of the waist, abdomen, hip, crotch, and knees, wear sensation was tested in the positions as follows: upright standing, moderate walking, chairsitting, bending forward to the maximum, and kneeling down, provided that as the measured points of garment pressure, anterior waist, abdominal protrusion, buttock protrusion, crotch, and midpatella were set and tested.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.1-14
• /
• 1997

Natural convection cooling of discrete heaters located in a two-dimensional vertical open top cavity is investigated experimentally. The five discrete heaters with same heat generation are located on the wall of the cavity. The heaters are arranged in two configurations; flush-mounted on a vertical wall and protruding from the wall about 4.5 mm. The materials used for the vertical walls are copper and epoxy-resin, and air is used as the cooling fluid. The temperature and flow fields in the cavity were visualized by means of Mach-Zehnder interferometer and smoke-method. Also, local temperature measurements are made along the vertical wall. Results are obtained for cavity aspect ratios of 4.6, 7.5 and 9.5 and modified Rayleigh numbers ranging from 10$^{3}$ to 10$^{6}$ . Results indicate that the cooling efficiency for the copper wall is superior to that of the epoxy-resin. For the epoxy-resin wall, the protrusion of the heaters plays a role in decreasing the heat transfer performance. The location of maximum temperature is significantly influenced by the wall materials and heater configurations. Correlations relating the Nusselt number to the modified Rayleigh number are proposed.

• 식물분류학회지
• /
• 제40권4호
• /
• pp.208-217
• /
• 2010

Crossosomatales is a recently recognized order in the rosid II clade with about 64 species in eight morphologically distinct families that have been previously classified in as many as 15 other orders. Phylogenetic relationships among the families and genera within Crossosomatales were investigated using chloroplast atpB, matK, and rbcL sequences employing maximum parsimony, maximum likelihood, and Bayesian methods. The phylogenetic framework was used to examine the patterns of morphological evolution and synapomorphies for subclades within Crossosomatales. The combined data with representative species from all genera in the order strongly supported monophyly of Crossosomatales. Strong support was found for the families in the Southern Hemisphere, in which Aphloiaceae is sister to the clade of (Geissolomataceae, (Ixerbaceae + Strasburgeriaceae)). The sister relationship between the Southern Hemisphere clade and families distributed primarily in the Northern Hemisphere was also supported. As in the previous studies, following relationships were found within the Northern Hemisphere clade: Staphyleaceae is sister to a clade of (Guamatelaceae, (Stachyuraceae + Crossosomataceae)). The pattern analysis indicates that evolutionary pattern of morphological characters is complex, requiring multiple changes within Crossosomatales. Several reproductive traits, such as inflorescence, aril, stigma, and conspicuous protrusion from pollen aperture, corroborate the molecular phylogeny.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제38권2호
• /
• pp.31-37
• /
• 2019

Silkworm larval mortality specifically during spinning stage leading to non-spinning with specific morphological symptoms was frequently complained by sericulturists in Karnataka, India during 2015. Survey was conducted and information collected through questionnaire from the identified farmers who faced the problem of non-spinning in both traditional and non-traditional areas of Karnataka. Survey results indicate that the problem is specific to the silkworm crop of those farmers' who shifted from other crops of agriculture/ horticulture/olericulture/ floriculture to Sericulture. Silkworm rearing performance of the batches fed with these leaves confirmed that the pesticide sprayed to the crops previous to mulberry, remain in the soil and when mulberry plantation is taken up in these gardens, the pesticide is absorbed by the roots of mulberry plants and transported to the leaves. Silkworms that feed on these mulberry leaves, grow and ripen normally but during spinning stage, larvae die with external symptoms like regurgitation, body shrinkage, rectal protrusion later become hook shaped leading to non-spinning or partial metamorphosis into pupa and death or spin flimsy cocoons. Larval mortality ranged from a minimum of twenty five percent to a maximum of hundred percent. The problem was noticed from the first harvest of leaves and lasted for a maximum period of 36 months. Cocoon crop loss depends on the concentration, duration and type of pesticides used previously for other crops.

• Korean Journal of Radiology
• /
• 제20권4호
• /
• pp.671-682
• /
• 2019

Objective: To investigate whether computed tomography (CT) and fluorine-18-labeled fluoro-2-deoxy-D-glucose (FDG) positron emission tomography (PET) may be applied to distinguish thymic epithelial tumors (TETs) from benign cysts in the anterior mediastinum. Materials and Methods: We included 262 consecutive patients with pathologically proven TETs and benign cysts 5 cm or smaller who underwent preoperative CT scans. In addition to conventional morphological and ancillary CT findings, the relationship between the lesion and the adjacent mediastinal pleura was evaluated qualitatively and quantitatively. Mean lesion attenuation was measured on CT images. The maximum standardized uptake value (SUVmax) was obtained with FDG-PET scans in 40 patients. CT predictors for TETs were identified with multivariate logistic regression analysis. For validation, we assessed the diagnostic accuracy and inter-observer agreement between four radiologists in a size-matched set of 24 cysts and 24 TETs using a receiver operating characteristic curve before and after being informed of the study findings. Results: The multivariate analysis showed that post-contrast attenuation of 60 Hounsfield unit or higher (odds ratio [OR], 12.734; 95% confidence interval [CI], 2.506-64.705; p = 0.002) and the presence of protrusion from the mediastinal pleura (OR, 9.855; 95% CI, 1.749-55.535; p = 0.009) were the strongest CT predictors for TETs. SUVmax was significantly higher in TETs than in cysts (5.3 ± 2.4 vs. 1.1 ± 0.3; p < 0.001). After being informed of the study findings, the readers' area under the curve improved from 0.872-0.955 to 0.949-0.999 (p = 0.066-0.149). Inter-observer kappa values for protrusion were 0.630-0.941. Conclusion: Post-contrast CT attenuation, protrusion from the mediastinal pleura, and SUVmax were useful imaging features for distinguishing TETs from cysts in the anterior mediastinum.

• Journal of Oral Medicine and Pain
• /
• 제23권1호
• /
• pp.65-73
• /
• 1998

This study evaluated whether substantial airflow resistance changes occurred by changing jaw position in normal and snoring subjects. A case-control design was utilized to assess group differences. Subjects included 11 snoring patients and 10 non-snoring subjects. Airway resistance was assessed using a whole body plethysmograph. Subjects in this study had their mouth opening standardized to a position of 7 mm of vertical separation and the resistance was measured under the following conditions; normal jaw position and 2/3 maximum protrusive jaw position. The results were as follows : 1. The airway resistance was higher in snoring group than in non-snoring group. 2. Both groups had a significant decrease in their airflow resistance upon jaw protrusion. In conclusion, these data document that airflow resistance can be significantly influenced by jaw positioning. Moving the jaw in a protrusive position produced reduction of resistance.

• Journal of Oral Medicine and Pain
• /
• 제13권1호
• /
• pp.5-12
• /
• 1988

The purpose of this study was to evaluate the therapeutic effect of occlusal stabilization splint on the clinical symptoms and the condylar movement in patients with Temporomandibular Disorders(TMD). For the study, 15 TMD patients treated with stabilization splint and followed up were selected. The age of them was from 18 to 65 years and the mean period of treatment was 2.9 months. The author examined signs and symptoms of TMD according to Dr. Friction's evaluation from and recorded the condylar paths with Denar pantronic before and after splint therapy. The obtained results were as follows : 1. On the first visit, 11 patients(73.3%) showed muscle tenderness on palpation and the frequency was lateral pterygoid, masseter, medial pterygoid, temporalis, sternocleidomastoideus in the order named. 2. Occlusal stabilization splint was more effective in pain relief(100%) than in other dysfunction improvement(85.7%) 3. The amount of maximum opening increased from 37.1㎜ to 42.2㎜, but those of protrusion and laterotrusion changed little. 4. Pan. PRI scores decreased from 32.9 to 21.8, which meant improved reproducibility of mandibular border movements, and the group with sever dysfunction category showed more decrease in score than the group with moderate or slight dysfunction category.

• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.266-274
• /
• 2014

Parametric bodies reproduce the actual shape of human body parts and should be convenient for general users to change size to judge the visual fit of clothes on-line. In this study, three parametric bodies(i.e. I, C, D ) were compared to verify the accuracy of the provided body dimensions and reproducibility to a target model. To compare reproducibility, the 20s female standard virtual model developed for an apparel industry by Korean agency for technology and standards is used. The investigation of existing parameters showed that the numbers and kinds of parameters provided by each program were different with some errors in notation; in addition, some of virtual body dimensions went beyond the maximum allowable error. The result of changing each parametric body to the 20s female standard body showed that D, C, I in order produced better reproducibility for body dimensions. There were different levels of protrusion and concavity in the virtual cross sections and virtual longitudinal sections despite the small differences in body dimensions and cross sectional areas; in addition, some parametric body was not bilateral symmetry. The results of this study can be used as basic information in the standardization of a virtual model used in a virtual garment program.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권9호
• /
• pp.456-465
• /
• 2001

In this paper, breakdown voltages in $SF_6-N_2$ mixtures were experimentally investigated to understand characteristics of dielectric strength and physical phenomena in nonuniform field disturbed by a needle shape protrusion. The test voltages are the lightning impulse$(\pm1.2/44 \mus)$ and the damped oscillatory impulse$(\pm400 ns / 0.83 MHz)$ voltages which can be occurred by the operation of disconnecting switches in gas-insulated switchgears(GIS). The effects of the polarity and wave shape of the test voltages, and the gas pressure on the V-t characteristics were in detail examined. The V-t characteristic curves were measured in different two ways : (1) one is the method by taking the maximum voltage recorded at or prior to breakdown against the time to breakdown, that is, the Procedures recommended in IEC 60060-1, (2) the other is the method by taking the voltage at the instant of chopping against the time to breakdown. As a result, the V-t characteristics of $SF_6-N_2$ mixtures in nonuniform electric field were significantly affected by the polarity and wave shape of the applied voltages. The positive breakdown voltages resulted in lower breakdown voltages in the time ranges considered, and the V-t curves for the negative oscillatory impulse voltage were extended over the longer time range. For the lightning impulse voltages, the V-t curves obtained by IEC Pub. 60060-1 were nearly same with the V-t curves obtained by the voltage at the instant of chopping against the time to breakdown. It is clear that the actual breakdown voltages were much lower than the maximum voltages appearing at or prior to breakdown because of the displacement current produced as a result of the dV/dt during the oscillatory transient voltage app1ication. The scattering of the negative actual breakdown voltages was much larger than that of the positive.

• 대한치과교정학회지
• /
• 제50권2호
• /
• pp.120-128
• /
• 2020

Objective: The aims of the present study were to evaluate the changes in the maximum lip-closing force (MLF) after orthodontic treatment with or without premolar extractions and verify the correlation of these changes with dentoskeletal changes. Methods: In total, 17 women who underwent nonextraction orthodontic treatment and 15 women who underwent orthodontic treatment with extraction of all four first premolars were included in this retrospective study. For all patients, lateral cephalograms and dental models were measured before (T0) and after (T1) treatment. In addition, MLF was measured at both time points using the Lip De Cum LDC-110R^® device. Statistical analyses were performed to evaluate changes in clinical variables and MLF and their correlations. Results: Both groups showed similar skeletal patterns, although the extraction group showed greater proclination of the maxillary and mandibular incisors and lip protrusion compared to the nonextraction group at T0. MLF at T0 was comparable between the two groups. The reduction in the arch width and depth and incisor retroclination from T0 to T1 were more pronounced in the extraction group than in the nonextraction group. MLF in the extraction group significantly increased during the treatment period, and this increase was significantly greater than that in the nonextraction group. The increase in MLF was found to be correlated with the increase in the interincisal angle and decrease in the intermolar width, arch depth, and incisor-mandibular plane angle. Conclusions: This study suggests that MLF increases to a greater extent during extraction orthodontic treatment than during nonextraction orthodontic treatment.