• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.493-496
• /
• 1997

This paper constructed the experimental system which is able to drive in series or separately excited by switching of the field winding, using a DC motor and obtained the characteristics of efficiency with speed and torque of each motor's type through the experiment. From this result controlled drive which is able to series DCM or separately excited DCM in the optimal point of efficiency as finding the types of motor having maximum efficiency with torque and speed. By performing high efficiency tracking drive, it is expected that energy consumption of power source with limited energy density would be reduced, and so utility efficiency would be improved.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.2
• /
• pp.107-112
• /
• 2014

To cope with the ever increasing electric power demands in metropolitan areas, a greater underground cable transmission capacity is required. In general, it must be determined whether the temperature in the tunnel maintains the maximum allowable temperature. In order to improve this point, it is used to the loss factor. But, for economic cooling, it is problem to use such loss factor in this country. In this study, based on the load factor in this country, technique for calculating the loss factor has been presents. The suggested method has been tested in a sample section using the computer and the results have shown the usefullness of the suggested method.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.357-360
• /
• 2008

In this paper a high efficiency soft switching boost converter is proposed for photovoltaic system. Using some resonant components, the circuit can be achieved the soft switching capability. Each of the switches in the proposed circuit performs ZV (Zero Voltage) or ZC (Zero Current) switching. Thus, the high efficiency characteristic can also be obtained, and then the size of the total system can be reduced. The operational modes of the verifying the effectiveness of the proposed circuit. As a matter of course, we will present the simulation results in this paper.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.194-199
• /
• 2000

The creep rate is affected by the temperature and in fact. if the temperature above $T_M/2(T_M:melting\;point)$. The aim of the present investigation is to study the relationship of static creep and cyclic creep behavior of pure copper and the formulation of these phenomena with the special attention to the instantaneous strain. strain rate from time and number of cycles have the same inclination Steady state creep rate depend upon maximum stress and can be expressed as linear function according to Power law creep equations Creep rupture time has relation with creep rate. and it make a group represented as the same direct line regardless of max stress, stress ratio and the temperature. Initial strain effect on continuous creep deformation. and have guantitative relationship between elastic and Plastic strain. LMP have similar tendency than OSDP and MHP according to temperature

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.114-116
• /
• 2008

본 논문에서는 DC-DC 컨버터를 이용하여 조류 발전의 MPPT(Maximum Power Point Tracking) 제어를 제안하였다. 기존의 고정 듀티 제어를 이용한 발전 시스템과 가변 듀티를 이용한 발전시스템과의 비교를 통해서 가변듀티를 이용한 제어방법이 더욱 우수한 성능을 나타낸다는 것을 검증하였다. 제안한 시스템은 블레이드, 영구자석 동기전동기, 다이오드 정류기, DC-DC 컨버터로 구성되어 있으며, 고정듀티, 가변듀티 퍼지제어기를 이용한 가변듀티 방법을 이용하여 제어하였다. 본 시스템은 조류 속도의 측정 없이 컨버터의 듀티 가변으로 발전기가 최대 출력전력을 낼 수 있도록 제어하므로, 별도의 측정 장비가 필요 없다. 따라서 시스템 구성비용 적고, 복잡성이 낮으며, 효율이 높다. 알고리즘의 유효성은 Matlab Simulink를 통해서 검증하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.420-423
• /
• 2010

최근 RFID/USN 기술을 산업화 현장에 적용하기 위한 실용화 기술로 만들기 위해서는 기존 임베디드 시스템에 적용되고 있는 다양한 검증 기술 및 에너지 효율화 기술이 USN분야에서도 적용하기 시작하였다. 특히, USN 분야의 경우 에너지 효율성 문제가 가장 크게 작용하기 때문에 에너지 효율성을 평가하고 해결을 위한 솔루션 제공이 필수적이다. 본 논문에서는 이러한 효용성 검증에 필요한 첫 번째 단계로 USN 마이크로 에너지획득을 위해 에너지 획득 시스템을 제시하고져 한다. 특히, 파워 소스 제너레이션 기술에 대한 다양한 연구를 진행하고 이를 바탕으로 효율적인 에너지 획득 시스템 하드웨어를 설계하고, 설계된 에너지 획득 시스템을 이용하여 MPPT(Maximum Power Point Tracking) 알고리즘을 구현하고 이를 MPPT Controller 형태로 구현한 뒤 최종적인 에너지 획득 시스템을 제시한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.1
• /
• pp.34-49
• /
• 1984

The stability of machine tool systems is analyzed by considering the machining process as a stochastic process without decomposing into machine tool structural dynamics and cutting processes. In doing so the time series analysis technique developed by Wu and Pandit is applied systematically to the relative vibration between cutting tool and work- piece measured under actual working conditions. Various characteristic properties derived from the fitted ARMA(Autoregressive Moving Average) Models and those from raw data directly are investigated in relation with the system stability. Both damping ratio and absolute value of the characteristic roots of the AR part of the most significant dynamic mode are preferred as stability indicating factors to the other pro-perties such as theoretical variance .gamma. (o) or absolute power of the most dominant dynamic mode. Maximum aplitude during a certain interval and variance estimated from raw data are shown to be very sensi- tive to the type of the signal and the location of measurement point although they can be obtained rather easily. The relative vibration signal is also analyzed by FFT(Fast Fourier Transform) Analyzer for the purpose of comparison with the spectrums derived from the fitted ARMA models.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.217-222
• /
• 2015

In this paper, a study was conducted for the optimization through shear web of shape the Edison program in wind power blade. We measured the displacement and stress distribution through two optimization methods to select the model with the smallest displacement and stress values. Before running the analysis, We try to find the inflection point through the shear web of the model and then analyze by introducing the geometric nonlinearity. The first optimization variables are introduced by the pitch angle and three web shapes. Third model such a honeycomb structure is good way to get an advantage for bending test. According to a method of previous optimization, third model is chosen and then the thickness of the web and blade as a variable is introduced, it is extracted as a result of displacement and the maximum stress per mass.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.6
• /
• pp.18-27
• /
• 2011

LED lighting because of high efficiency, long life, friendly environment, as a general lighting of the next generation, has been substituted for incandescent bulb and fluorescent lamp. The proposed system for use of solar battery is the intelligent controller for LED street lights which is improved the method of battery charging and charging efficiency in winter to extend battery life cycle, controlled lighting current according to SoC and in steps. Also, it is implemented emotional lighting which is controlled with the surrounding environment, by using colorful sub LED to take up 10[%] of a source of total light, white LED. As a lab results, the proposed system was implemented functions to adapt to the environmental changes, and improved the charging efficiency and battery life cycle.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05c
• /
• pp.17-20
• /
• 2004

PV model is presented based on the shockley diode equation. The simple model has a photo-current source, an single diode junction and a series resistance and includes temperature dependences. An accurate PV module electrical model is presented, matching with boost converter MPPT strategy and demosntarted in Matlab for a typical general purpose solar cell. Given solar insolation and temperature, the model returns current vector and MPP.