• 대한전자공학회논문지SD
• /
• 제40권11호
• /
• pp.29-36
• /
• 2003

이 논문에서는, 2D-DCT, 양자화, AC/DC 예측블록, 스캔 변화, 역 양자화, 2D-IDCT로 이루어진 DCTQ 모듈의 효율적인 구조를 제안한다. 이 모듈은 1064 cycle 안에 매크로블록을 처리할 수 있도록 설계하였으며, MPEG-4 Video codec에서 30frame 의 CIF 영상에 대하여 동시에 encoder와 decoder를 처리할 수 있다. 단지 하나의 1D-DCT와 IDCT core 가 2-D DCT/IDCT 대신에 사용되며, 1 bit serial 분산산술방식을 이용하여 1-D DCT/IDCT를 구현하였다. 또한 파워소모를 줄이기 위해 움직임 예측에서 얻을 수 있는 SAE 값을 이용한 DCT와 양자화 모듈을 동작을 시키지 않는 방식을 제안하였다. 그리고 AC/DC 예측방법을 위한 메모리를 줄일 수 있도록 AC/DC 예측블록을 위한 메모리 구조 및 접근방법을 제안하였다. 그 결과, 하드웨어의 재 사용성이 놀아지고 파워소모가 작아짐을 알 수 있었다. 제안된 설계는 27㎒로 돌아가며, 실험결과 DCT와 IDCT 는 IEEE 기준을 만족함을 알 수 있었다.

• 한국물환경학회지
• /
• 제34권4호
• /
• pp.391-398
• /
• 2018

The main purpose of this study is to suggest and recommend the more reliable flow direction methods within the framework of DEM and power law distribution, by investigating the existing methodologies. To this end SFD (single flow direction method), MFD (multiple flow direction method) and IFD (Infinite flow direction method) are applied to analyze the determination of a flow direction for the water particles as seen in the Jeonjeokbigyo basin, and then assessed with respect to the variation of flow accumulation in that region. As the main results revealed, the study showed the different patterns of flow accumulation are found out from each applications of flow direction methods utilized in this study. This brings us to understand that as the flow dispersion on DEM increases, in this case the contributing areas to the outlet grow in sequence of SFD, IFD, MFD, but it is noted that the contribution of individual pixels into outlet decreases at that time. In what follows, especially with the MFD and IFD, the result tends to make additional hydrologic abstraction from rainfall excess, as noted due to the flow dispersion within flow paths on DEM. Based on the parameter estimation for a power law distribution, which is frequently used for identify the aggregation structure of complex system, by maximum likelihood flow accumulation can be thought of as a scale invariance factor. In this regard, the combination of flow direction methods could give rise to the more realistic water flow on DEM, as revealed through the separate flow direction methods as utilized for dispersion and aggregation effects of water flow within the available different topographies.

• 방사성폐기물학회지
• /
• 제18권2호
• /
• pp.217-225
• /
• 2020

해체 원전에서 총 폐기물의 약 70~80%에 해당하는 많은 양의 콘크리트 폐기물은 해체 폐기물의 대부분을 차지한다. 해체 시 발생된 콘크리트 폐기물은 핵종별 농도에 따라 규제해제 폐기물과 방사성폐기물로 정의할 수 있다. 따라서, 방사성 콘크리트 폐기물의 처분 비용을 저감하기 위하여 자체 처분 및 제한적 재활용을 위한 제염 작업의 수행이 중요하다. 그러므로 콘크리트 폐기물의 효율적인 제염 작업을 위해 내부 방사능 분포를 예측하는 것이 필수적이다. 본 연구는 원전 해체 시, 발생되는 콘크리트 폐기물의 내부 방사능 분포를 예측하기 위하여 다양한 컴프턴 영상 재구성 방법의 성능을 비교하였다. 다양한 컴프턴 영상 재구성 방법으로 단순 역투사(SBP), 필터 후 역투사(FBP), 최대우도 기댓값 최대화 방법(MLEM), 그리고 기존의 MLEM의 시스템 반응 함수에 에너지 정보가 결합되어 확률적으로 계산하는 최대우도 기댓값 최대화 방법(E-MLEM)이 사용되었다. 재구성된 영상을 획득한 후, 정량적인 분석 방법을 이용하여 재구성된 영상의 성능을 정량적으로 비교 및 평가하였다. MLEM 및 E-MLEM 영상 재구성 방법은 각각 재구성된 영상에서 높은 이미지 분해능과 신호 대 잡음비를 유지하는 데 있어 가장 좋은 성능을 보여주었다. 본 연구에서 도출된 결과들은 원자력 시설 해체 시 방사성 콘크리트 폐기물의 내부 방사능 분포를 예측하기 위한 수단으로 컴프턴 영상을 사용할 수 있는 가능성을 보여주었다.

• 한국유체기계학회 논문집
• /
• 제17권2호
• /
• pp.24-29
• /
• 2014

In general, a large-capacity axial flow fan is used for industrial processes or ventilation in a social overhead capital infrastructure. The main characteristics of the large axial-flow fan need a lot of electrical power consumption and operate 24 hours a day, 365 days a year. Since the large axial flow fan consumes several hundreds to thousands kW per hour, both manufacturer and consumer are struggling to select high efficiency products for saving energy and reducing operation cost. Therefore, the performance testing should be accurately conducted in experimental equipments. The performance estimation and uncertainty of measurement of the axial-flow fan gathered from the result from nozzle shaped testing equipments certified with ANSI/AMCA standard and duct shaped testing equipment under the same experimental condition. The experimental results from both facilities have maximum 17% differences in performance evaluation and uncertainty of measurement. As considering that the differences, it is doubt about the reliability of testing result. The test was repeated with the specific term during 12 months because it is important to fully reflect the real conditions and to decide the repeatability of data. The evaluation of duct type testing facilities was failed to get an uncertainty measure. Testing results were previously published. As a series of previous paper, axial fan (∅1690 mm) and duct type testing facilities were fabricated. The purpose of fabricating testing equipment was testing an uncertainty measurement under the controlled environments.

• 한국전자통신학회논문지
• /
• 제17권4호
• /
• pp.641-648
• /
• 2022

본 연구에서는 지수 형태의 분포(Exponential Basic, Inverse Exponential, Lindley, Rayleigh) 특성을 갖는 NHPP 소프트웨어 신뢰성 모형의 성능을 비교 분석하였고, 이를 근거로 최적의 신뢰성 모형도 함께 제시하였다. 소프트웨어 고장 현상을 분석하기 위하여 시스템 운영 중 수집된 고장 시간 데이터를 사용하였고, 모수 추정은 최우 추정 법을 적용하여 해결하였다. 다양한 비교 분석(평균제곱오차(MSE) 분석, 평균값 함수의 참값 예측력 분석, 강도 함수의 평가, 임무 시간을 적용한 신뢰도를 평가)을 통하여 Lindley 모형이 가장 우수한 성능을 가진 효율적인 모형임을 알 수 있었다. 본 연구를 통하여 기존 연구사례가 없는 지수 형태의 특성을 갖는 분포의 신뢰도 성능을 새롭게 파악하였고, 이를 통하여 소프트웨어 개발자들이 초기 단계에서 활용할 수 있는 기본적인 설계 데이터를 제시할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.105.1-105.1
• /
• 2010

Korea Electric Power Research Institute (KEPRI) has developed a compact coal-gasification system to accumulate our experiment skills. The combustion furnace for residual oil was modified as a small size coal gasifier. Recently, coal feeding system was also upgraded to control coal feed rate more accurately. Our research group has conducted several experiments to find out the effect of $O_2$/coal ratio on the cold gas efficiency. Furthermore, the effect of $N_2$/coal ratio on the transport characteristics was also studied. According to the calculation of heat and mass balance, the cold gas efficiency was estimated to the maximum at $O_2$/coal ratio of around 0.73. But small size gasifier such as ours required higher value of $O_2$/coal ratio than that of the theoretical estimation. On the optimal $N_2$/coal ratio, we noticed that the coal feed rate was intimately related with the transporting gas pressure and the pipe diameter.

• ETRI Journal
• /
• 제25권6호
• /
• pp.489-502
• /
• 2003

This paper presents an MPEG-4 video codec, called MoVa, for video coding applications that adopts 3G-324M. We designed MoVa to be optimal by embedding a cost-effective ARM7TDMI core and partitioning it into hardwired blocks and firmware blocks to provide a reasonable tradeoff between computational requirements, power consumption, and programmability. Typical hardwired blocks are motion estimation and motion compensation, discrete cosine transform and quantization, and variable length coding and decoding, while intra refresh, rate control, error resilience, error concealment, etc. are implemented by software. MoVa has a pipeline structure and its operation is performed in four stages at encoding and in three stages at decoding. It meets the requirements of MPEG-4 SP@L2 and can perform either 30 frames/s (fps) of QCIF or SQCIF, or 7.5 fps (in codec mode) to 15 fps (in encode/decode mode) of CIF at a maximum clock rate of 27 MHz for 128 kbps or 144 kbps. MoVa can be applied to many video systems requiring a high bit rate and various video formats, such as videophone, videoconferencing, surveillance, news, and entertainment.

• Wind and Structures
• /
• 제18권5호
• /
• pp.567-598
• /
• 2014

In this paper, wind induced aerodynamic loads on a standard tall building have been evaluated through large-eddy simulation (LES) technique. The flow parameters of an open terrain were recorded from the downstream of an empty boundary layer wind tunnel (BLWT) and used to prescribe the transient inlet boundary of the LES simulations. Three different numerically generated inflow boundary conditions have been investigated to assess their suitability for LES. A high frequency pressure integration (HFPI) approach has been employed to obtain the wind load. A total of 280 pressure monitoring points have been systematically distributed on the surfaces of the LES model building. Similar BLWT experiments were also done to validate the numerical results. In addition, the effects of adjacent buildings were studied. Among the three wind field generation methods (synthetic, Simirnov's, and Lund's recycling method), LES with perturbation from the synthetic random flow approach showed better agreement with the BLWT data. In general, LES predicted peak wind loads comparable with the BLWT data, with a maximum difference of 15% and an average difference of 5%, for an isolated building case and however higher estimation errors were observed for cases where adjacent buildings were placed in the vicinity of the study building.

• 한국전자파학회지:전자파기술
• /
• 제5권3호
• /
• pp.22-35
• /
• 1994

본 논문에서는 대역폭 효율의 향상을 위해 상관 부호에 따른 FM시스템올 설계한다. 상판 부호화된 신호는 연속 위상과 정진폭 특성으로 전력 효율이 높다. 하지만 이 신호는 최소 유콜리언 거리(${d^2}_{mm}$)가 작기 때분에 신호대 잡음비(SNR)의 손실과 수신 성능(BER)의 저하를 초래한다. 따라서 본 논문에서는 수신 성능의 향상을 위하여 상관 부호화에 따른 수정된 최대 근사 추정을 작용한다. 최대 근사 추정은 사용된 채널에서 bit-by-bit 검파에 비하여 수산 오율을 향상시킨다. 결정 궤환을 적용하지 않은 경우, 최대 근사 추정은 bit by bit 겁파에 비해 약 2dB의 수신 성능이 향상되었다. 결정 궤환을 적용한 경우, 최대 근사 추정은 bit-by bit 검파에 비해 약 4dB의 수신 성능이 향상되었다. 특히 안정된 채널보다 채널이 열악할수록 최대 근사 추정과 결정 궤환의 성능이 우수하다.

• Progress in Superconductivity
• /
• 제1권1호
• /
• pp.68-72
• /
• 1999

Since the discovery of high Tc superconductors, great efforts have been focused to develop high performance HTS magnets for the ultimate applications to power system devices. Magnet designers, however, have had difficulties in the estimation of the maximum operating current of the designed magnet from the tested short sample data, due to the degradation of the critical current density in the magnet. Similar story applies to the HTS electrical bus bar. It has been found that the critical current of Bi-2223 stacked tapes is much less than the total summation of critical currents of each tape, which is mainly attributed to the self magnetic fields. Furthermore, since the critical current degradation of Bi-2223 tape is greater in the normal magnetic field (to the tape surface) than in the parallel one, detailed magnetic field configurations are required to reduce the self field effects. In this paper, we calculate the self field effects of a stacked conductor, defining self field factors of normal and parallel magnetic fields to the tape surface. Finally, the critical current degradations in the HTS magnet are explained by the introduced self field factors of the stacked conductor.