• 제목/요약/키워드: maximum growth rate

검색결과 1,196건 처리시간 0.029초

Growth and characterization of lead bromide: application to mercurous bromide

  • Kim, Geug-Tae
    • 한국결정성장학회지
    • /
    • 제14권2호
    • /
    • pp.50-57
    • /
    • 2004
  • Mercurous Bromide ($Hg_2Br_2$) crystals hold promise for many acousto-optic and opto-electronic applications. This material is prepared in closed ampoules by the physical vapor transport (PVT) growth method. We investigate the effects of solutal convection on the crystal growth rate in a horizontal configuration for diffusive-convection conditions and purely diffusion conditions achievable in a low gravity environment. Our results show that the growth rate is decreased by a factor of one-fourth with a ten reduction of gravitational acceleration near y = 2.0 cm. For 0.1 $g_O$ the growth rate pattern exhibits relatively flat which is intimately related to diffusion-dominated processes. The growth rate nonuniformity is regardless of aspect ratio across the interfacial positions from 0 to 1.5. Also, the effect of a factor of the ten reduction in the gravitational acceleration is same to both Ar = 5 and 2. The enlargement in the molecular weight of B from 50 to 500 by a factor 4 causes a decrease in the maximum growth rate by the same factor, indicative of the effect of solutal gradients.

Diphasic Analysis of Growth in Japanese Quail

  • Ozkan, Muhip
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제17권9호
    • /
    • pp.1281-1285
    • /
    • 2004
  • A line of Japanese quail selected for increased body weight for 15 generations (C) and an unselected control line (K) were used to examine the impact of selection for body weight on the growth curve of Japanese quail. In addition, the effect of sex on the growth curve in each line was also studied, namely females of C (CF), males of C (CM), females of K (KF) and males of K (KM). The monophasic and diphasic growth models were studied for adequacy in describing growth curves of quail in both sexes of the C and K lines. The monophasic function provided almost the same growth rate for both sexes in both lines. However, the growth rates calculated by means of the diphasic function differed between sexes for both lines, except for those calculated for C during the second growth phase. While there were 2-3 days difference between sexes in age at maximum gain in both lines with a monophasic model, the difference between sexes in the age at maximum gain in both lines became greater according to the diphasic model. There were 5 and 7 days difference between sexes in the age at maximum gain in line C for the first and second growth phases, respectively. A difference between sexes of 18 and 11 days in the age at maximum gain for the first and second phases, respectively, was estimated for line K when the diphasic function was fitted. The use of diphasic functions provides more detailed information on growth patterns. The results showed that the use of the diphasic function was better because it provided greater insights into understanding the biology of growth.

수성이상계에서 K.fragilis의 에탄올 추출발효 특성에 관한 연구 (Extractive Ethanol Fermentation Characteristics of K.fragilis in an Aqueous Two Phase System)

  • 김진한;허병기목영일
    • KSBB Journal
    • /
    • 제9권5호
    • /
    • pp.443-449
    • /
    • 1994
  • 여러 가지 조성의 PEG 20000jDx로 구성한 수성 이상계를 사용한 에탄올 추출발효실험을 통하여 K. fragilis에 의한 돼지감자 주스의 발효 특성을 초기 당농도 및 생성 알코올 농도의 함수로 규명하여 다음의 결과를 얻었다. 균체의 비증식속도 빛 에탄올 비생성속도는 PEG 및 Dx 농도가 낮을수록 증가하였다. 비증식속도는 조성에 무관하게 초기 당농도 $80g/\ell$에서 최대치를 보였고, 에탄올 비생성속도는 $120g/\ell$최대치를 보였다. 생성 알코올 농도에 의한 저해 영향은 비증식속도에 대하여 지수함수형 을, 에탄올 비생성속도에 대하여 쌍곡선함수형을 나타냈다. Dx 농도가 2.5~5% 범위에셔 PEG 농도 가 낮을수록 에탄올 저해 영향은 감소하였다. 총괄 에탄올 생산성은 초기 당농도가 증가할수록 높았으 며 생산성이 최대치에 도랄하는 소요시간도 당농도가 증가함에 따라 증가하였다. 시간별 에탄올 생산 속도는 초기 당농도 $160g/\ell$ 에서 가장 높은 값을 보 였다. 총괄 에탄올 생산성은 대조실험에 비하여 수 성이상계 추출발효를 통하여 1.2배 이상 증가하였고 초기 당농도가 높을수록 이상계 추출발효가 더욱 유리한 것으로 나타났다.

  • PDF

A Parametric Study on Ethanol Production from Xylose by Pichia stipitis

  • Lee Tae-Young;Kim Myoung-Dong;Kim Kyu-Yong;Park Kyungmoon;Ryu Yeon-Woo;Seo Jin-Ho
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제5권1호
    • /
    • pp.27-31
    • /
    • 2000
  • Characteristics of ethanol production by a xylose-fermenting yeast, Pichia stipitis Y-7124, were studied. The sugar consumption rate and specific growth rate were higher in the glucose-containing medium than in the xylose-containing medium. Specific activities of xylose reductase and xylitol dehydrogenase were higher in the medium with xylose than glucose, suggesting their induction by xylose. Maximum specific growth rate and ethanol yield were achieved at 30 g xylose/L concentration without formation of by-products such as xylitol and acetic acid whereas a maximum ethanol concentration was obtained at 130 g/L xylose. Adding a respiratory inhibitor, rotenone, increased a maximum ethanol concentration by $10\%$ compared with the control experiment. In order to evaluate the pattern of ethanol inhibition on specific growth rate, a kinetic model based on Luong's equations was applied. The relationship between ethanol concentration and specific growth rate was hyperbolic for glucose and parabolic for xylose. A maximum ethanol concentration at which cells did not grow was 33.6 g/L for glucose and 44.7 g/L for xylose.

  • PDF

실내 배양시 부착기질 크기에 따른 저서성 미세조류 Nitzschia sp.의 성장 특성 (Effect of Attachment Substrate Size on the Growth of a Benthic Microalgae Nitzschia sp. in Culture Condition)

  • 오석진;윤양호;산본민차;양한섭
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제12권2호
    • /
    • pp.91-95
    • /
    • 2009
  • 저서성 미세조류의 성장에 미치는 부착기질의 영향을 알기 위해 서로 다른 크기의 glass bead를 첨가하여 저서성 미세조류 Nitzschia sp.(진해만 클론)의 성장을 조사하였다. 연구에 사용된 glass bead의 크기는 0.09-0.15 mm(G1), 0.25-0.50 mm(G2), 0.75-1.00 mm(G3) 그리고 1.25-1.65 mm(G4)이며, glass bead를 첨가하지 않는 대조구도 설정하였다. Nitzschia sp.의 가장 높은 성장속도(0.37/day)와 최대세포밀도($9,232{\pm}840$ cells/mL)는 가장 작은 크기의 glass bead를 첨가한 G1에서 나타났다. 그리고 성징속도와 최대세포밀도는 glass bead 크기의 증가와 함께 감소하였다(G4의 성장속도와 최대세포밀도는 각각 0.24/day와 $6,397{\pm}524$ cells/mL였다). 더욱이 대조구의 성장속도는 실험구 G1에서 G3의 성장속도보다 상당히 낮았다. 이 결과에서 Nitzschia sp.와 같은 저서성 미세조류를 위한 부착기질은 성장속도 뿐만 아니라 세포밀도에도 큰 영향을 주는 것으로 나타났다. 따라서 부착미세조류의 생리실험을 위해서는 예비실험으로 부착기질의 유무 및 대상 종에 적합한 부착입자의 크기의 고려가 필요할 것으로 보인다.

  • PDF

잔디깍기와 TIBA 처리가 잔디 인공군락의 물질생산에 미치는 영향 (Effects of Mowing and TIBA(Triiodobenzoic acid) on Dry Matter Production of Cultivated Zoysia japonica Community)

  • 진희성
    • Journal of Plant Biology
    • /
    • 제30권2호
    • /
    • pp.135-149
    • /
    • 1987
  • An experiment was made in order to analyze the growth characteristics and productivity of Zoysia japonica under control, mowing and TIBA treatment conditions at the experimental farm of Kyung Hee University. The field was planned by the split plot design method and each treatment was given to two plots (40$\times$40 and 100$\times$100 mm) and was replicated three times. Each plot was 9$m^2$ for Zoysia japonica. The sampling of each plot was taken once a week after sowing. In order to know the dry matter of total standing crops, each organ of plants was kept at 9$0^{\circ}C$ and weighed. Total leaf area of a plant was measured by drawing method. The author adopted the growth analysis of English School. Holocellulose analysis by sodium chlorite method was made. The increasing rate of LAI was high in all plots between 10th and 12th week after sowing and high growth rate of assimilatory organ was observed in low density area of TIBA plot. Between 10th and 12th week after sowing all the experimental plots showed high increasing rate of standing crop and in the process of growth each density area of TIBA plot recorded high increasing rate. In all the plots F/C ratio and RGR were high when the growth rate of assimilatory organ was increasing cosiderably, and the higher the planting density was, the higher F/C ratio was recorded. In all the plots NAR recorded maximum rate before the growth period to show a high increase of RGR. In the process of the growth TIBA plot showed high icnreasing rate of NAR. CGR showed high value in high density areas of all the plots and reached its maximum in the 13th week after sowing. Compared to the other experimental areas the low planting density areas of control plot and TIBA plot showed considerable earlier lignification indicating low Holocellulose content in the growth process.

  • PDF

유전자 재조합 대장균 발효의 최대 생산성을 위한 생육에서 제품 생성으로 전환시기의 최적화 (Optimization of Switching Time from Growth to Product Formation for Maximum Productivity of Recombinant Escherichia coli Fermentation)

  • ;신평균;서진호
    • 한국미생물·생명공학회지
    • /
    • 제18권4호
    • /
    • pp.394-400
    • /
    • 1990
  • 유전자 조작된 세포 발효공정의 생산수율을 최대화하기 위하여 세포의 성장속도와 제품 생성속도간의 상반관계를 고려하여야 한다. 유전자 조작된 E.coli 발효에 있어, 최적화 이론을 적용하여 두 속도의 가중치를 결정함으로써 생산수율의 최대화를 꾀하였다. 성장저해제의 농도는 비 성장속도를 조절하고 결국 융합된 유전자의 발현 속도를 조절하는 변수로 사용되다. 이런 system의 특성을 위하여 간단한 unstructured model를 사용하였다.

  • PDF

단상 혐기성 소화공정에서의 동력학적 연구 (A Study on Kinetics in One-Phase Anaerobic Digestion)

  • 조관형;조영태
    • 한국환경과학회지
    • /
    • 제9권1호
    • /
    • pp.75-80
    • /
    • 2000
  • Kinetic data for the acid phase anaerobic digestion were presented in this study and the constants were determined with acid production rate and gas production rate. Process models based on continuous culture theory were used to describe the characteristics of the acid forming microorganisms and to enable further development toward utilization of the process in a more rational manner. Acid phase digestion can be separated with appropriate manipulation of hydraulic retention time in anaerobic digestion. Kinetic analysis of data from the various hydraulic retention times using a phase specific model obtained form the acid phase indicated maximum specific growth rate of 0.40/h, saturation constant of 2,000mgCOD.$\ell$, yield coefficient of 0.35 mgVSS/msCOD utilized and decay constant of 0.04/h for the acid production rate. Similar analysis of data for the gas production rate indicated maximum specific growth rate of 0.003/h, saturation constant of 2,200mgCOD/$\ell$, yield coefficient of 0.035 mgVSS/mgCOD utilized and decay constant of 0.06/h.

  • PDF

304 스테인리스 鋼의 高溫에서의 表面균열 成長特性에 관한 硏究 (Surface crack growth behaviors of 304 stainless steel at elevated temperatures)

  • 서창민;신형섭;권영태
    • 대한기계학회논문집
    • /
    • 제11권3호
    • /
    • pp.355-361
    • /
    • 1987
  • 본 연구에서는 고온기기의 부재로 널리 사용되는 304스테인리스강을 사용하여 기기의 사용조건을 고려한 538.deg. C(1000.deg. F), 593.deg. C(1100.deg. F)및 650.deg. C(1200.deg. F)의 세가지 온도레벨하의 대기중에서 크리이프-피로시험을 실시하여 작은 인공표면결함으로부터 발생.성장하는 표면균열의 성장거동을 조사 연구하였다. 또한 주파수의 영향을 조사 하기 위하여 538.deg. C에서 고온피로시험을 실시하여 이 결과를 크리이프 및 크리이프피로 시험의 결과와 비교.검토하였다.

혼합영양 배양조건에서의 Anabena 배양을 위한 유기탄소(acetate 종류 및 농도) 선정 연구 (Selection of Organic Carbon (Different Form of Acetate Compounds and Concentration) for Cultivation of Anabena under Mixotrophic Cultivation Mode)

  • 홍카이;고시원;이태윤
    • Korean Chemical Engineering Research
    • /
    • 제56권1호
    • /
    • pp.73-78
    • /
    • 2018
  • 본 연구는 혼합영양 배양 조건에서 acetate의 주입이 Anabena azollae의 성장에 미치는 영향을 파악하기 위해 수행되었다. 4가지 종류의 acetate 중 ethyle acetate가 Anabena azollae의 성장에 가장 효과적이라고 밝혀졌으며, 주입한 ethyle acetate의 농도가 증가할수록 성장속도는 증가하는 것을 확인하였다. 40 mM의 ethyl acetate의 경우 비성장속도는 $0.979day^{-1}$, 최대바이오매스 생산성은 $0.293g\;L^{-1}\;d^{-1}$로 본 연구에서 배양속도가 가장 빠른 것으로 판명되었다. Acetic acid와 butyl acetate의 경우 Anabena azollae 성장을 방해하는 것으로 나타났다. Aetration의 경우 0.54 vvm에서 성장속도가 가장 빨랐다. 반연속배양에서는 aeration 실험이 끝난 후 연속하여 ethyle acetate 주입을 하여 배양을 하였다. 회분식실험에 비해 반연속배양에서의 비성장속도와 최대바이오매스 생산성은 모두 감소하였지만 최대 농도는 5.91 g/L로 가장 큰 값을 나타내었다.