• 폴리머
• /
• 제25권6호
• /
• pp.840-847
• /
• 2001

메탈로센 촉매로 제조된 메탈로센 선형 저밀도 폴리에틸렌(m-LLDPE)과 Ziegler-Natta 촉매에 의하여 제조된 선형 저밀도 폴리에틸렌(LLDPE) 블렌드의 결정화 거동을 고찰하여 보았다. 특히 블렌딩이 이들의 결정화 induction time 및 구정성장 속도 그리고 최대 구정의 크기에 미치는 영향을 중점적으로 살펴보았다. LLDPE/LDPE 블렌드와는 달리 LLDPE에 m-LLDPE를 블렌딩할 경우, 각각의 결정 형성 대신 하나의 결정이 형성됨을 확인하였으며 induction time이 현저히 짧아짐을 알 수 있었다. 하지만 이러한 감소는 블렌드의 조성비에는 크게 영향을 받지 않았다. 또한 블렌딩에 의하여 LLDPE의 구정성장 속도가 증가함을 확인할 수 있었으며, 구정의 최대 크기는 induction time과 구정성장 속도가 LLDPE에 미치는 영향에 따라 달라짐을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.311-315
• /
• 2000

A numerical investigation is made of time-dependent buoyant convection in a square of a non-Boussinesq fluid. The density-temperature$({\rho}-T)$ relation is modeled by a quadratic function, with the maximum density ${\rho}_M$ at temperature $T_M$. The horizontal walls of the square are insulated, and a pulsating temperature $T_H=T_M+{\Delta}T'\;sin({\omega}{\tau})$ is imposed on the hot vertical sidewall. The temperature at the cold wall $T_c$ is constant. Extensive numerical solutions to the governing Navier-Stokes equations are portrayed. Resonance is identified by monitoring the amplitude of the mid-plane Nusselt number, $A(Nu^*)$. The primary resonance frequency is found by matching ${\omega}$ to the nondimensional basic mode $N_1$ of internal gravity oscillations. Due to the quadratic$({\rho}-T)$ relationship, the effective pulsation frequency for density, $2{\omega}$, is meaningful, which brings forth the secondary resonance frequency, i.e., $2{\omega}=N_1$

• Environmental Engineering Research
• /
• 제22권2호
• /
• pp.141-148
• /
• 2017

Globalization, industrialization, mining, and uncontrolled population growth have fostered a shortage of potable water. Therefore, it has become imperative to understand an effective and reasonable water purification technique. A renewed interest in electrocoagulation (EC) has been spurred by the search for reliable, cost-effective, water-treatment processes. This paper has elucidated a technical approach for getting rid of heavy metals and total suspended solids (TSS) from synthetic water using an aluminum electrode. The effect of operational parameters, such as current density, inter-electrode distance, operating time, and pH, were studied and evaluated for maximum efficiency. This study corroborates the correlation between current density and removal efficiency. Neutral pH and a low electrode gap have been found to aid the efficacy of the EC setup. The outcome indicates that a maximum TSS removal efficiency of 76.6% occurred at a current density of $5.3mA/cm^2$ during a contact time of 30 min. In the case of heavy metals remediation, 40 min of process time exhibited extremely reduced rates of 99%, 59.2%, and 82.1%, for Cu, Cr, and Zn, respectively. Moreover, kinetic study has also demonstrated that pollutants removal follows first-and second-order model with current density and EC time being dependent.

• Carbon letters
• /
• 제6권4호
• /
• pp.234-242
• /
• 2005

Bending and tensile properties of 2D cross-ply C/C composites with processing heat treatment temperature (HTT) are evaluated. C/C composites used are made from two types of PAN based T700 and M40 carbon fibers with phenolic resin as carbon matrix precursor. Both the types of composites are heat treated at different temperatures (ranging from 750 to $2800^{\circ}C$) and characterized for bending and tensile properties. It is observed that, real density and open porosity increases with HTT, however, bulk density does show remarkable change. The real density and open porosity are higher in case T-700 carbon fiber composites at $2800^{\circ}C$, even though the density of M40 carbon fiber is higher. Bending strength is considerably greater than tensile strength through out the processing HTT due to the different mode of fracture. The bending and tensile strength decreases in both composites on $1000^{\circ}C$ which attributed to decrease in bulk density, thereafter with increase in HTT, bending and tensile strength increases. The maximum strength is in T700 fiber based composites at HTT $1500^{\circ}C$ and in M40 fiber based composites at HTT $2500^{\circ}C$. After attending the maximum value of strength in both types of composite at deflection HTT, after that strength decreases continuously. Decrease in strength is due to the degradation of fiber properties and in-situ fiber damages in the composite. The maximum carbon fiber strength realization in C/C composites is possible at a temperature that is same of fiber HTT. It has been found first time that the bending strength more or less 1.55 times higher in T700 fiber composites and in M40 fiber composites bending strength is 1.2 times higher than that of tensile strength of C/C composites.

• 한국농공학회지
• /
• 제23권3호
• /
• pp.65-77
• /
• 1981

The Compaction of fill dam is very important for increasing of the safty of dam. Vibration roller is used for the compaction of pervious materials such as sand and gravel. The principal objects of this study are to give a comstruction criteria of vibration roller and to find out the relationship between dry density and permeabity of pervious soil after compaction. The results in this study are summerized as follows. 1.The relationship between maximum dry density (Υdmax) and optimum moisture content(Wo) of modified compaction test is Υdmax=2. 74-0. 064w0 2.The maximum dry density decrease with increasing fine particle(n) and the relative formular is n==ae-brdmax 3.The maximum dry density is influenced more by passing rate of number 200 sieve than 4 sieve. 4.The coefficient of permeability are similar when the degrees of compaction are equal even though the spreading thickness of soil are different. 5.The coefficient of permeability(K)is greatly influence by fine particle passing number 200 sieve, and those relationship is inversely proportionate. 6.The K values of pervious soil are from 10-0 cm/sec to 10-4 cm/sec when degree of compaction by a modified method is from 90 to 95percent. 7.The coarser material is little influenced on the permeability with different density. 8.The increasing rate of permeability with decreasing degree of compaction is more influened by fine pacticle than number 200 sieve. When degree of compaction decrease from 100 percent to 90 percent the K values of SM and GM increase about 20 times but GW increase 6 times only. 9.The effect of compaction by vibration roller is greatly influenced by 6 passes and the increasing rate of the effect is decraased at 8 passes. 10. In order to get the degree of compaction of 95 percent or more, 6 to 8 passes of roller are generall required with 30 cm thickeness of soil for 4.5 ton to 6.5 ton vibration roller and 7 to 8 passes is required with 50cm thickness for 8 to 12 ton roller.

• 한국농공학회지
• /
• 제16권3호
• /
• pp.3539-3542
• /
• 1974

Maximum density and optimum moisture content of a soil may be one of the very important properties to be specified in the design of earth structures and their works. However, the determination of these soil properties may not be done without the necessary equipment and time-consuming field tests. This study was conducted to develop an easier method by determing the relations between the natural moisture content and optimum moisture content and between maximum density and optimum moisture content so determined. These velations are remarkably defferent according to the areas where the samples were taken, and thus analysis of the experimental results are shown by regions as follows: Eastern Districs:{{{{Tdmax= { 1} over {0.0090Wopt+0.417 } ( delta = +- 0.042, gamma =0.92) Wopt=0.251WN+8.5( delta = +- 2.41%, gamma =0.87) }}}} Southern Districts: {{{{Tdmax= { 1} over {0.0088Wopt+0.412 } (delta = +- 0.083, gamma =0.89) Wopt=0.332WN+8.42(delta = +- 3.41%, gamma =0.84)}}}}Central Districtsl1): {{{{Tdmax= { 1} over {0.0112Wopt+0.383} ( delta = +- 0.052, gamma =0.97) Wopt=0.758WN+2.606( delta = +- 4.72%, gamma =0.79)}}}}($\delta$:Standard Deviation, ${\gamma}$:Correlation Coefficient)

• 한국통신학회논문지
• /
• 제27권6A호
• /
• pp.562-567
• /
• 2002

잡음 예측 최대 유사도(noise predictive maximum likelihood, NPML) 검출기는 잡음 예측/백색화 과정을 비터비 검출기의 가지 메트릭 계산 과정에 삽입하여 데이터 검출의 신뢰성을 높이게 된다. 따라서 기존의 PRML 검출기에 잡음 예측기를 포함시킴으로써 그것의 실제 성능이 향상되고 복잡도가 줄어드는 이점이 있다. 본 논문에서는 선형 채널과 비선형 채널 하에서 랜덤 시퀀스와 런-길이 제한 (1,7) 시퀀스를 적용하여, 고밀도 수직 자기 기록 (1.7$\leq$K$_{p}$$\leq$3.0)에서 잡음 예측 PR-등화 신호에 의한 NP(1221)ML 검출 시스템이 보다 높은 타수의 PR(12321)ML 시스템보다 복잡도가 낮으면서 우월한 성능을 나타냄을 모의 실험을 통해 분석, 검증하였다.

• 한국양식학회지
• /
• 제12권4호
• /
• pp.303-307
• /
• 1999

Copepod is useful live food organism in the larval rearing. However of fin fish, culcures of copepod species (Specially calanoida and cyclopoida) were very difficult under artificial management conditions. In this study, we report successful culture of a free swimming cyclopodia copepod species (Apocyclops sp.) by easily baker's yeast as food. The maximum culture density of Apocyclops sp. was observed 11,200±2,660 ind/ℓ during the 30 days culture periods in the 1.5ℓ culture tanks. The nauplii were growth up maximum density 6,400±432 ind/ℓ on day 16th. The number of egg carring female was observed maximum density (666.7 ind./ℓ) of two times after 6days and 28 days of initial culture.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.271-278
• /
• 2019

In recent years, the crack accidents of earth and rockfill dams occur frequently. It is urgent to study the tensile strength and tensile failure mechanism of the gravelly soil in the core for the anti-crack design of the actual high earth core rockfill dam. Based on the self-developed uniaxial tensile test device, a series of uniaxial tensile test was carried out on gravelly soil with different gravel content. The compaction test shows a good linear relationship between the optimum water content and gravel content, and the relation curve of optimum water content versus maximum dry density can be fitting by two times polynomial. For the gravelly soil under its optimum water content and maximum dry density, as the gravel content increased from 0% to 50%, the tensile strength of specimens decreased from 122.6 kPa to 49.8 kPa linearly. The peak tensile strain and ultimate tensile strain all decrease with the increase of the gravel content. From the analysis of fracture energy, it is proved that the tensile capacity of gravelly soil decreases slightly with the increasing gravel content. In the case that the sample under the maximum dry density and the water content higher than the optimum water content, the comprehensive tensile capacity of the sample is the strongest. The relevant test results can provide support for the anti-crack design of the high earth core rockfill dam.

• 한국경영과학회지
• /
• 제38권1호
• /
• pp.201-216
• /
• 2013

Diffusion is a basic mathematical tool for modern financial engineering. The theory of the estimation methods for diffusion models is an important topic of the financial engineering. Many researches have been tried to apply the likelihood estimation method for estimating diffusion models. However, the likelihood estimation method for diffusion is complicated and needs much amount of computing. In this paper we develop the estimation methods which are simple enough to be compared to the Euler approximation method, and efficient enough statistically to be compared to the likelihood estimation method. We devise pseudo-likelihood and propose the maximum pseudo-likelihood estimation methods. The pseudo-likelihoods are obtained by approximating the transition density with normal distributions. The means and the variances of the distributions are obtained from the delta expansion suggested by Lee, Song and Lee (2012). We compare the newly suggested estimators with other existing estimators by simulation study. From the simulation study we find the maximum pseudo-likelihood estimator has very similar properties with the maximum likelihood estimator. Also the maximum pseudo-likelihood estimator is easy to apply to general diffusion models, and can be obtained by simple numerical steps.