• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.23-28
• /
• 2009

The general six-port phase correlator is comprised of a Wilkinson power divider and three $90^{\circ}$ hybrid coupler, which has less than 10 % bandwidth. In this paper, the six-port phase correlator using two section power divider has 33 % bandwidth and external matching $90^{\circ}$ hybrid coupler with 15 % bandwidth was designed at the center frequency of 2.5 GHz. The simulation result by ADS2003A indicates that RF port and LO port of proposed six-port phase correlator got wide frequency bandwidth of 14 % for VSWR of 1.5. The fabricated six-port phase correlator has a bandwidth of 12 % similar to the simulation result. The maximum phase discrepancy and insertion loss are $6^{\circ}$ and 2.5 dB over a bandwidth, respectively.

• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1223-1232
• /
• 2016

A virtual network technology can provide a network reflecting the requirements of various services. The virtual network can distribute resources of the physical network to each virtual slice. An efficient resource distribution technique is needed to reflect the requirements of various services. Existing bandwidth distribution techniques can only control downlink traffic without taking traffic conditions on the network into account. Downlink and uplink share the same resources in a wireless network. The existing bandwidth distribution techniques assumed that all stations generate saturated traffic. Therefore, the existing bandwidth distribution technique cannot make traffic isolation in a virtual wireless network. In this paper, we proposed a traffic-based bandwidth control techniques to solve these problems. We applied Software-Defined Networking(SDN) to the virtual wireless network, monitored the traffic at each station, and searched for stations that generated unsaturated traffic. We also controlled both uplink and downlink traffics dynamically based on monitoring information. Our system can be implemented with legasy 802.11 clients and SDN-enabled APs. After the actual test bed configuration, it was compared to existing techniques. As a result, the distribution performance of the proposed technique was improved by 14% in maximum.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.455-464
• /
• 2005

In this paper, we implement resource allocation algorithm based on the WiBro system which including OFDMA, TDD, and we propose the algorithm in order to increase bandwidth efficiency. In this algorithm, data is allocated from the subchannel which has large channel gain to the subchannel which has small channel gain with maximum modulation order. The moment total power is more than available power, the modulation order of the latest subchannel is adjusted. The problem of decreasing of throughput in large channel attenuation environment is solved by allocating additional power. Still, this algorithm has large bandwidth efficiency.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.223-226
• /
• 2001

This paper suggest a fast multimedia delivery system. by using accelerated video. The system can delivery multimedia data faster and more effectively than previous delivery system. By using accelerated video, users can get information by least cost, and internet delivery server can send maximum information on limited bandwidth.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.83.6-83
• /
• 2002

$\textbullet$ Disturbance observer $\textbullet$ Performance enhancement $\textbullet$ LFT formulation $\textbullet$ Structured singular value $\textbullet$ Maximum bandwidth of DOB $\textbullet$ DVD experiments $\textbullet$ Robust stable disturbance observer

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.930-936
• /
• 2007

In this paper, the high gain and broadband antenna operating for SDMB(Satellite Digital Multimedia Broadcasting) system is realized, The proposed antenna consists of the SAP(Shorted Annular Patch) structure, which inhibits surface-wave and the parasitic SAP element with spacing of $0.25 {\lambda}_0$ in order to improve gain, bandwidth and directivity. The RHCP(Right Hand Circular Polarization) is generated by two slits, which are made along the periphery of the circular patch at the diametrically opposite points, The simulated maximum gain of the proposed antenna is 12.6 dBi, which is better 5.22 dBi than maximum gain of the conventional microstrip patch antenna. The measured maximum gain is 10.5dBi at operating frequency 2.63GHz. Also, the measured impedance bandwidth$(VSWR{\leq}2)$ of the proposed antenna is $360MHz(2.488{\sim}2.848 GHz)$, which is better 300 MHz than the bandwidth of the conventional microstrip patch antenna. The measured HPBW(Half Power Beam Width) of the proposed antenna is $45.8^{\circ}$, and the measured FBR(Front to Back Ratio) is 15.49 dBi, The 3dB axial ratio bandwidth is 220 MHz$(2.54{\sim}2.76 GHz)$.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1432-1435
• /
• 1996

This paper obtains maximum allowable delay bounds for stability of network-based control systems and presents a network scheduling method which makes the network-induced delay be less than the maximum allowable delay bound. The maximum allowable delay bounds are obtained using the Lyapunov theorem. Using the network scheduling method, the bandwidth of a network can be allocated to each node and the sampling period of each sensor and controller can be determined. The presented method can handle three kinds of data (periodic, real-time asynchronous, and non real-time asynchronous data) and guarantee real-time transmissions of real-time synchronous data and periodic data, and possible transmissions of non real-time asynchronous data. The proposed method is shown to be useful by examples in two types of network protocols such as the token control and the central control.

• Journal of Mechanical Science and Technology
• /
• v.20 no.1
• /
• pp.51-58
• /
• 2006

To compensate for the motion errors in hydrostatic tables, a method to actively control the clearance of a bearing corresponding to the amount of error using actively controlled capillaries is introduced in this paper. The design method for an actively controlled capillary that considers the output rate of a piezo actuator and the amount of error that must be corrected is described. The basic characteristics of such a system were tested, such as the maximum controllable range of the error, micro-step response, and available dynamic bandwidth when the capillary was installed in a hydrostatic table. The tests demonstrated that the maximum controllable range was $2.4\;{\mu}m$, the resolution was 27 nm, and the frequency bandwidth was 5.5 Hz. Simultaneous compensation of the linear and angular motion errors using two actively controlled capillaries was also performed for a hydrostatic table driven by a ballscrew and a DC servomotor. An iterative compensation method was applied to improve the compensation characteristics. Experimental results showed that the linear and angular motion errors were improved to $0.12{\mu}m$ and 0.20 arcsec, which were about $1/15^{th}$ and $1/6^{th}$ of the initial motion errors, respectively. These results confirmed that the proposed compensation method improves the motion accuracy of hydrostatic tables very effectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.634-640
• /
• 2000

This paper proposes a new extended decision directed-decision estimated phase recovery algorithm based on maximum likelihood parameter estimation for OQPSK. In this scheme, comparing conventional one, the data dependent noise of phase recovery loop is reduced by inserting filter with 2 taps to in-phase and quadrature-phase channel respectively before phase detector. The proposed scheme is compared to conventionalscheme and OQPSK in aspect to BER(Bit Error Rate) and phase error according to the roll-off factor of baseband filter, the output back-offs of nonlinear satellite channel, and loop bandwidth.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.225-231
• /
• 2014

When a spatial regression model that uses kernel density values as a dependent variable is applied to retail business data, a unique model cannot be selected because kernel density values change following kernel bandwidths. To overcome this problem, this paper suggests how to use the point pattern analysis, especially the L-index to select a unique spatial regression model. In this study, kernel density values of retail business are computed by the bandwidth, the distance of the maximum L-index and used as the dependent variable of spatial regression model. To test this procedure, we apply it to meeting room business data in Seoul, Korea. As a result, a spatial error model (SEM) is selected between two popular spatial regression models, a spatial lag model and a spatial error model. Also, a unique SEM based on the real distribution of retail business is selected. We confirm that there is a trade-off between the goodness of fit of the SEM and the real distribution of meeting room business over the bandwidth of maximum L-index.