• ETRI Journal
• /
• v.34 no.4
• /
• pp.613-616
• /
• 2012

A multi-spot-beam satellite is an attractive technique for future satellite communications since it can support high data rates by projecting high power density to each spot beam and can reuse a frequency in different cells to increase the total system capacity. In this letter, we propose a resource management technique adjusting the bandwidth of each beam to minimize the difference between the traffic demand and allocated capacity. This represents a reasonable solution for dynamic bandwidth allocation, considering a trade-off between the maximum total capacity and fairness among the spot beams with different traffic demands.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.6
• /
• pp.20-32
• /
• 1997

An optimum parasitic inductance is observed for maximizing the modulation bandwidth of the multiple quantum well (MQW) electro-absorption optical modulator. For 1.1 pF device cpaacitance of the current MQW optical modulator, the optimum parasitic inductances for maximum bandwidth are calculated for different terminating resistors. In ase of 50.ohm. terminating resistor, the 3-dB modulation bandwidth can be increased 45% wider by using the optimum parasitic inductance than nothing parasitic inductance. This calculated optimum inductance can be practically implemented, since the parasitic inductance of bondwires can be accurately analyzed using the method of moments (MoM) and controlled by changing the length and shpae of bondwires.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.3
• /
• pp.200-209
• /
• 2008

This paper describes bandwidth linearization techniques in phase-locked loop (PLL) design for common-clock serial link applications. Utilizing a continuously tunable single-input dual-path LC VCO and a constant-gain phase detector, a proposed architecture is well suited to implementing PLLs that must be compliant with standards that specify minimum and maximum allowable bandwidths such as PCI Express Gen2 or FB-DIMM applications. A prototype 4.75 to 6.1-GHz PLL is implemented in 90-nm CMOS. Measurement results show that the PLL bandwidth and random jitter (RJ) variations are well regulated and that the use of a differentially controlled dual-path VCO is important for deterministic jitter (DJ) performance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.4
• /
• pp.146-153
• /
• 2008

In this paper, a integrated phase-locked loop(PLL) as a clock multiphase generator for a high speed serial link is designed. The designed PLL keeps the same bandwidth and damping factor by using programmable current mirror in the whole operation frequency range. Also, the close-loop transfer function and VCO's phase-noise transfer function of the designed PLL are obtained with circuit netlists. The self impedance on board-mounted chip is calculated according to sizes and positions of decoupling capacitors. Especially, the detailed self-impedance analysis is carried out between frequency ranges represented the maximum gain in the close-loop transfer function and the maximum gain in the VCO's phase noise transfer function. We shows PLL's jitter characteristics by decoupling capacitor's sizes and positions from this result. The designed PLL has the wide operating range of 0.4GHz to 2GHz in operating voltage of 1.8V and it is designed 0.18-um CMOS process. The reference clock is 100MHz and PLL power consumption is 17.28mW in 1.2GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8B
• /
• pp.739-746
• /
• 2004

An ATM/AAL2 is standardized to transmit delay sensitive application services, which has small size packet, efficiently. An AAL2 transmission scheme is used to deliver voice and data traffic on the lob interface between base station (Node-B) and Radio Network Controller (RNC) in UMTS network. To predict AAL2 performance, a detailed end-to-end UMTS network performance simulator was developed. We performed detailed simulation(cell packing density and bandwidth gain) for voice and data services in UTRAN. The results indicate that the maximum bandwidth gain in Node-B is about 17% and the bandwidth gain of AAL2 multiplexing in $I_{ub}$ for data services is less than that for voice service. Futhermore, the more offered load increase the more the bandwidth gain decreases in a concentrator.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.103-109
• /
• 2003

We have proposed the 4-Dimensional Multiple-Subcarrier Modulation with fixed bias in Optical Wireless Communications. Here, the 4-D signal vectors are derived from the optimization technique of signal waveforms maximizing the minimum distance between signal points in an n-dimensional Euclidean sphere. The resulting vectors are used in generating the output amplitude of impulse generator in a Multiple-Subcarrier Modulation scheme. We have achieved that the normalized power requirement of the proposed system is maximum 3 dB and 3.3 dB smaller than those of normal QPSK, Reserved Subcarrier, and Minimum Power scheme, respectively. Also, in the range of 1.125 ∼ 1.25 of the normalized bandwidth, the proposed system has maximum 3 dB, 2 ∼ 4 dB, 0 ∼ 3 dB smaller bandwidth requirement compare to normal QPSK, Res. Subcarrier, Min. Power schemes, respectively.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.66.2-66.2
• /
• 2016

KASI and NAOJ are making collaborating efforts to implement faster mapping capability into the new 275-500 GHz Atacama Submillimeter Telescope Experiment focal plane array (FPA). Feed horn antenna is one of critical parts of the FPA. Required fractional bandwidth is almost 60 % while that of traditional conical horn is less than 50 %. Therefore, to achieve this wideband performance, we adopted a horn of which the corrugation depths have a longitudinal profile. A profiled horn has features not only of wide bandwidth but also of shorter length compared to a linear-tapered corrugated horn, and lower cost fabrication with less error can be feasible. In our design process the flare region is represented by a cubic splined curve with several parameters. Parameters of the flare region and each dimension of the throat region are optimized by a differential evolution algorithm to keep >20 dB return loss and >30 dB maximum cross-polarization level over the operation bandwidth. To evaluate RF performance of the horn generated by the optimizer, we used a commercial mode matching software, WASP-NET. Also, Gaussian beam (GB) masks to far fields were applied to give better GB behavior over frequencies. The optimized design shows >23 dB return loss and >33 dB maximum cross-polarization level over the whole band. Gaussicity of the horn is over 96.6 %. The length of the horn is 12.5 mm which is just 57 % of the ALMA band 8 feed horn (21.96 mm).

• Journal of Korea Game Society
• /
• v.14 no.6
• /
• pp.59-68
• /
• 2014

Memory bandwidth requirements of UHD (Ultra High Definition $4096{\times}2160$) game scenes have been much more increasing. This paper presents a lossless DPCM-GR based compression algorithm using CUDA for solving the memory bandwidth problem without sacrificing image quality, which is modified from DDPCM-GR [4] to support bit parallel pipelining. The memory bandwidth efficiency increases because of using the shared memory of CUDA. Various asynchronous transfer configurations which can overlap the kernel execution and data transfer between host and CUDA are implemented with the page-locked host memory. Experimental results show that the maximum 31.3 speedup is obtained according to CPU time. The maximum 30.3% decreases in the computation time among various configurations.

• Journal of Digital Contents Society
• /
• v.5 no.4
• /
• pp.306-310
• /
• 2004

In this paper, we proposed a capacity enhancement method using TCM-128QAM modulation and bandwidth extension of 25MHz in HDR-WPAN (high data rate wireless personal area network) system. In case using TCM-128 QAM modulation scheme, we can obtain maximum 66Mbps transmission rate in bandwidth of 15MHz. If extend bandwidth by 25MHz and roll-off coefficient ${\alpha}=0.35$, we can obtain maximum 110Mbps transmission rate. These results are confirmed through PSD(power spectrum density) analysis and BER (bit error rate) performance.

• Journal of KIISE:Information Networking
• /
• v.32 no.2
• /
• pp.156-166
• /
• 2005

Ethernet passive optical network is an economical and efficient access network that has received significant research attention in recent years. A MAC(Media Access Control) protocol of PON, the next generation access network, is based on TDMA(Time Division Multiple Access) basically. In this thesis, we addressed the problem of dynamic bandwidth allocation in QoS based Ethernet PONs. We augmented the bandwidth allocation to support QoS in a differentiated services framework. Our differentiated bandwidth guarantee allocation(DBGA) allocates effectively and fairly bandwidths among end users. Moreover, we showed that DBGA that perform weighted bandwidth allocation for high priority packets result in better performance in terms of average and maximum packet delay, as well as network throughput compared with existing dynamic bandwidth allocations. We used simulation experiments to study the performance and validate the effectiveness of the proposed bandwidth allocations.