• ETRI Journal
• /
• v.30 no.5
• /
• pp.741-743
• /
• 2008

In this letter, a heuristic channel allocation and scheduling scheme is proposed. By comparing the size of the alternative-factor assessment, which is obtained by simple calculation, we can easily find the most appropriate channel for each user for overall throughput enhancement. Numerical results show that the downlink throughput of the proposed scheme is higher than that of proportional fairness and is almost the same as that of the maximum C/I scheme, while user fairness remains better than that of the maximum C/I scheme.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.439-444
• /
• 2002

In this paper, we present both the link budget analysis according to system parameters and the cell coverage according to transmitter power and modulation scheme of digital MMDS among the wireless CATV system methods which is bated on the wireless internet service. Also, in this paper, we present C/I and number of subscriber according to splitting cell. In this paper, the cell coverage of which obtain the results according to both transmitter power from 0dBW to -9dBW and modulation scheme of QPSK, 16QAM and 64QAM based on link budget was analysis for system parameter of digital MMDS was able to provide from maximum 134km to minimum 4.3km. Also, in this paper, the number of subscriber of which obtain the results according to polarization wave, frequency of frequency reuse and C/I in 4. 6 and 8 sectors was able to provide from maximum 5,200DSI to minimum 1,300DSI.

• Journal of Korea Multimedia Society
• /
• v.13 no.11
• /
• pp.1667-1676
• /
• 2010

In this paper, we propose a packet scheduling algorithm that assigns different number of HS-PDSCH(High Speed Primary Downlink Shared Channel) to the service user according to the received signal to interference ratio of CPICH(Common Pilot Channel) and to the traffic characteristics. Assigned channel number is determined by the signal to interference ratio level from CPICH. The highest signal to interference ratio user gets the number of channels based on the signal to interference ratio table and the remained channels are assigned to the other level users. Therefore the proposed scheme can provide the similar maximum service throughput and higher fairness than existing scheduling algorithm. Simulation results show that our algorithm can provide the similar maximum service throughput and higher fairness than MAX C/I algorithm and can also support the higher service throughput than proportional fairness scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.888-894
• /
• 2007

The computational complexity of a sphere decoder (SD) is conventionally reduced by decoding order scheme which sorts candidate symbols in the ascending order of the Euclidean distance from the output of a zero-forcing (ZF) receiver. However, since the ZF output may not be a reliable sorting reference, we propose two types of sorting schemes to allow faster decoding. The first is to use the newly found lattice points in the previous search round instead of the ZF output (Type I). Since these lattice points are closer to the received signal than the ZF output, they can serve as a more reliable sorting reference for finding the maximum likelihood (ML) solution. The second sorting scheme is to sort candidate symbols in descending order according to the number of candidate symbols in the following layer, which are called child symbols (Type II). These two proposed sorting schemes can be combined with layer sorting for more complexity reduction. Through simulation, the Type I and Type II sorting schemes were found to provide 12% and 20% complexity reduction respectively over conventional sorting schemes. When they are combined with layer sorting, Type I and Type II provide an additional 10-15% complexity reduction while maintaining detection performance.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.458-465
• /
• 2021

Borate nonlinear optical crystals have been used as frequency conversion devices in many fields due to their unique transparency and nonlinearity from ultraviolet to visible spectral range. In this study, we theoretically and numerically investigate the properties of broadband second harmonic generation (SHG) in the recently reported Pna2₁-Ba₃Mg₃(BO₃)₃F₃ (BMBF) crystal. The technique is based on the simultaneous achievement of birefringence phase matching and group velocity matching between interacting waves. We discussed all factors required for broadband SHG in the BMBF in terms of two types of phase matching and group velocity matching conditions, the beam propagation direction and the corresponding effective nonlinearity and spatial walk-off, and the spectral responses. The results show that bandwidths calculated in the broadband SHG scheme are 220.90 nm (for Type I) and 165.85 nm (for Type II) in full-width-half-maximum (FWHM). The central wavelength in each case is 2047.76 nm for Type I and 1828.66 nm for Type II at room temperature. The results were compared with the non-broadband scheme at the telecom C-band.

• Journal of computational fluids engineering
• /
• v.11 no.1 s.32
• /
• pp.29-35
• /
• 2006

A code is developed to analyze a spherically symmetric underwater explosion. The arbitrary Lagrangian-Eulerian(ALE) Godunov scheme for two-phase flow is used to calculate numerical fluxes through moving control surfaces. For detonation gas of TNT and liquid water, the Jones-Wilkins-Lee(JWL) equation of states and the isentropic Tait relation are used respectively. It is suggested to use the Godunov variable to estimate the velocity of a material interface. The code is validated through comparisons with other results on the gas-water shock tube problem. It is shown that the code can handle generation of discontinuity and recovering of continuity in the normal velocity near the material interface during shock waves interact with the material interface. The developed code is applied to analyze a spherically symmetric underwater explosion. Repeated transmissions of shock waves are clearly captured. The calculated period and maximum radius of detonation gas bubble show good agreements with experimental and other numerical results.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.15 no.4
• /
• pp.388-395
• /
• 1986

Numerical solutions of two-dimensional, steady, and natural are investigated in a confined rectangular cavity with porous media. The saturated fluid is bounded by two isothermal vertical walls at different temperatures and two adiabatic horizontal walls. Governing equations are numerically solved by finite difference method with the up wind scheme. Distributions of streamline and temperature we. predicted for aspect ratios ranging from 0.1 to 1.0, Rayleigh numbers 50 to $10^4$, and tilt angles $0^{\circ}\;to\;60^{\circ}$. Representative plots of temperature and velocity field according to tilt angle are presented. The effects of aspect ratio, Rayleigh number, and tilt angle on local and average Nusselt numbers are obtained. The optimum conditions for maximum Nusselt number are also presented with tilt angles.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10C
• /
• pp.1032-1041
• /
• 2007

The global navigation satellite system (GNSS), which is the core technique for the location based service, adopts the direct sequence/spread spectrum (DS/SS) as its modulation method. The success of a DS/SS system depends on the synchronization between the received and locally generated pseudo noise (PN) signals. As a step in the synchronization process, the tacking scheme performs fine adjustment to bring the phase difference between the two PN signals to zero. The most widely used tracking scheme is the delay locked loop with early minus late discriminator (EL-DLL). In the ideal case, the EL-DLL is the best estimator among various DLL. However, in the band-limited multipath environment, the EL-DLL has tracking bias. In this paper, the timing offset range of correlation function is divided into advanced offset range (AOR) and delayed offset range (DOR) centering around the correct synchronization time point. The tracking bias results from the following two reasons: symmetry distortion between correlation values in AOR and DOR, and mismatch between the time point corresponding to the maximum correlation value and the synchronization time point. The former and latter are named as the type I and type II tracking bias, respectively. In this paper, when the receiver has finite bandwidth in the presence of multipath signals, it is shown that the type II tracking bias becomes a more dominant error factor than the type I tracking bias, and the correlation values in AOR are not almost changed. Exploiting these characteristics, we propose a novel tracking bias mitigation scheme and demonstrate that the tracking accuracy of the proposed scheme is higher than that of the conventional scheme, both in the presence and absence of noise.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.19 no.4
• /
• pp.7-18
• /
• 2013

Purpose: The aim of this paper is to reduce the stress and the disturbance occur in selective action of patient. This article will also help us to control spreading and reduce the order and bacteria produced by leprosy disease among the lepers. This will be achieved with the help of several variables and these variables help us on health benefits is 5S (Sort, Straighten, Shine, Standardize, Sustain) i.e. ratio of sectional morphology, lessor 90 degree angles, day light, universal design building and maximum ventilation. The replies from the questionnaire were collected based on varying levels of satisfaction and gloominess on the scale of 1-10. Methods: The multi-layer methodological framework for maximising the healing environment obtained from the observation of schemes and parameters of ANOVA: (Analysis Of Variance between five deciding factors) are. Firstly applied for the calculation of the patient's satisfaction for U.V light from sun on ECOTECT simulation, secondly the number of $90^{\circ}$ angle, along the corridors. Thirdly understanding the ways to represent people's perceptual structures and way finding with Space Syntax software. Fourthly the ratio of depth to height of the building typology and finally interviewing the subjects describing their special experiences based on scale value. The focus of this testing of human subjects was to receive data for the existence of image scheme in way-finding and to identify the mechanisms by which sun light impacts human (lepers) health. Results: AMPVA studies concluded that there is similarity between I and O plan as well as L and H plan whereas U plan was difference among the five selected architectural shapes. Implications: The purpose of this research is to show the effects of the I-type, L-type, C-type, U-type and O-type plan design, and to analyse the morphology for EBD (Evidence-Based Design) healing environment which is a universal design for Munghopir Karachi, in Pakistan.

• Korean Journal of Materials Research
• /
• v.11 no.10
• /
• pp.889-894
• /
• 2001

2wt% $Al_2O_3-doped$ ZnO (AZO) thin films were deposited on sapphire (0001) single crystal substrate by parellel type rf magnetron sputtering at 55$0^{\circ}C$. The as-grown AZO thin films was polycrystalline and showed only broad deep defect-level photoluminescence (PL). In order to examine the change of PL property, AZO thin films were annealed in $N_2$ (N-AZO) and $H_2$ (H-AZO) at the temperature of $600^{\circ}C$~$1000^{\circ}C$ through rapid thermal annealing. After annealed at $800^{\circ}C$, N-AZO shows near band edge emission (NBE) with very small deep-level emission, and then N-AZO annealed at $900^{\circ}C$ shows only sharp NBE with 219 meV FWHM. In Comparison with N-AZO, H-AZO exhibits very interesting PL features. After $600^{\circ}C$ annealing, deep defect-level emission was quire quenched and NBE around 382 nm (3.2 eV) was observed, which can be explained by the $H_2$passivation effect. At elevated temperature, two interesting peaks corresponding to violet (406 nm, 3.05 eV) and blue (436 nm, 2.84 eV) emission was firstly observed in AZO thin films. Moreover, peculiar PL peak around 694 nm (1.78 eV) is also firstly observed in all the H-AZO thin films and this is believed good evidence of hydrogenation of AZO. Based on defect-level scheme calculated by using the full potential linear muffin-tin orbital (FP-LMTO), the emission 3.2 eV, 3.05 eV, 3.84 eV and 1.78 eV of H-AZO are substantially deginated as exciton emission, transition from conduction band maximum to $V_{ Zn},$ from $Zn_i$, to valence band maximum $(V_{BM})$ and from $V_{o} to V_BM}$, respectively.