• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권3호
• /
• pp.276-281
• /
• 2010

The maxillary posterior area is the most challenging site for the dental implant. After missing of teeth on maxillary posterior area due to periodontal problems, the remaining alveolar ridge is usually very thin because of not only pneumatization of maxillary sinus but also destruction of alveolar bone. The maxillary sinus bone graft procedure is one of the most predictable and successful treatments for the rehabilitation of atrophic and pneumatized endentulous posterior maxilla. But, in case of severe destruction of alveolar bone due to periodontal problems, very long crown length is still remaining problem after successful sinus graft procedures. We performed vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft. After this procedures, we could get more favorable crown-implant ratio of final prosthodontic appliance and more satisfactory results on biomechanics. This is a preliminary report of the vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft, so requires more long-term follow up and further studies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권5호
• /
• pp.224-229
• /
• 2014

The maxillary posterior area is the most challenging site for the dental implant. Although the sinus graft is a predictable and successful technique for rehabilitation of atrophic and pneumatized posterior maxilla, when there is severe destruction of alveolar bone, a very long crown length remains challenging after successful dental implants installation with sinus graft. We performed vertical augmentation of the maxillary posterior alveolar ridge using the allogenic block bone graft with a simultaneous sinus graft using allogenic and heterogenic bone chips. After about six months, we installed the dental implant. After this procedure, we achieved a more favorable crown-implant fixture ratio and better results clinically and biomechanically. This is a preliminary report of vertical augmentation of maxillary posterior alveolar ridge using allogenic block bone graft and simultaneous maxillary sinus graft. Further research requires longer observation and more patients.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권4호
• /
• pp.146-153
• /
• 2014

Purpose: This study compares and evaluates the efficacy of graft materials after maxillary sinus bone grafts with autogenous tooth bone graft material (AutoBT), demineralized freeze-dried bone allograft (DFDBA) and deproteinized bovine bone mineral (DBBM). Methods: The study involved 30 sinuses in 26 patients who visited the Division of Oral and Maxillofacial Surgery, Department of Dentistry in Ajou University Hospital and received either AutoBT, DFDBA or DBBM with sinus elevation using the lateral window technique. Sinus graft height was measured before, immediately after, and six months after bone graft with panoramic radiography and the height changes of the sinus floor was compared according to the graft materials. Results: After six months, the decrease ratio of graft heights were 13.57% for AutoBT group, 14.30% for DFDBA group, and 11.92% for DBBM group. There was no statistically significant difference. Conclusion: The new maxillary sinus floor formed by the upper border of bone graft material, can repneumatize after the maxillary sinus elevation. Thus, long-term stability of sinus graft height represents an important factor for implant success. We found that the three graft materials for sinus elevation do not differ significantly and all three graft materials showed excellent resistance to maxillary sinus repneumatization. However, due to the special circumstances of the maxillary sinus and small sample, the actual difference between the three graft materials may not have been detectable. Therefore further study needs to be conducted for more reliable study results.

• 대한치과의사협회지
• /
• 제58권9호
• /
• pp.573-582
• /
• 2020

Today, maxillary sinus graft is considered to be the most prognostic of bone augmentation surgery as a preprosthetic treatment. Implant survival rates of more than 95% can be expected if appropriate decisions are made on the basis of implants, implant surface morphology, and use of a shield over the maxillary sinus front-wall. In addition, maxillary sinus grafty has a low rate of complications, and even if complications occur during or after maxillary sinus graft, most are localized and easily recovered.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.345-359
• /
• 2006

Loss of maxillary molar teeth leads to rapid loss of crestal bone and inferior expansion of the maxillary sinus floor (secondary pneumatization). Rehabilitation of the site with osseointegrated dental implants often represents a clinical challenge because of the insufficient bone volume resulted from this phenomenon. Boyne & James proposed the classic procedure for maxillary sinus floor elevation entails preparation of a trap door including the Schneiderian membrane in the lateral sinus wall. Summers proposed another non-invasive method using a set of osteotome and the osteotome sinus floor elevation (OSFE) was proposed for implant sites with at least 5-6mm of bone between the alveolar crest and the maxillary sinus floor. The change of grafted material in maxillary sinus is important for implant survival and the evaluation of graft height after maxillary sinus floor elevation is composed of histologic evaluation and radiomorphometric evaluation. The aim of the present study was radiographically evaluate the graft height change after maxillary sinus floor elevation and the influence of the graft material type in height change and the bone remodeling of grafts in sinus. A total of 59 patients (28 in lateral approach and 31 in crestal approach) who underwent maxillary sinus floor elevation composed of lateral approach and crestal approach were radiographically followed for up to about 48 months. Change in sinusgraft height were calculated with respect to implant length (IL) and grafted sinus height(BL). It was evaluated the change of the graft height according to time, the influence of the approach technique (staged approach and simultaneous approach) in lateral approach to change of the graft height, and the influence of the type of graft materials to change of the graft height. Patients were divided into three class based on the height of the grafted sinus floor relative to the implant apex and evaluated the proportion change of that class (Class I, in which the grafted sinus floor was above the implant apex; Class II, in which the implant apex was level with the grafted sinus floor; and Class III, in which the grafted sinus floor was below the implant apex). And it was evaluated th bone remodeling in sinus during 12 months using SGRl(by $Br\ddot{a}gger$ et al). The result was like that; Sinus graft height decreased significantly in both lateral approach and crestal approach in first 12 months (p$MBCP^{TM}$ had minimum height loss. Class III and Class II was increased by time in both lateral and crestal approach and Class I was decreased by time. SGRI was increased statistically significantly from baseline to 3 months and 3 months(p<0.05) to 12 months(p$ICB^{(R)}$ single use, more reduction of sinusgraft height was appeared. Therefore we speculated that the mixture of graft materials is preferable as a reduction of graft materials. Increasing of the SGRI as time goes by explains the stability of implant, but additional histologic or computed tomographic study will be needed for accurate conclusion. From the radiographic evaluation, we come to know that placement of dental implant with sinus floor elevation is an effective procedure in atrophic maxillary reconstruction.

• Journal of Periodontal and Implant Science
• /
• 제44권5호
• /
• pp.259-264
• /
• 2014

Purpose: The aim of this case report is to present the longitudinal results of sinus grafting using a new demineralized bovine bone material (DBBM) in human cases. Methods: A patient with a resorbed maxilla was treated by maxillary sinus grafting using a new deproteinized bovine bone material. After a healing period of 6.5 months, three implants were placed and restored. The patient was periodically recalled and followed up for 5 years after restoration. Results: Twelve partially edentulous patients (average age, 55.7 years) were followed up. All patients had insufficient residual height in their maxillary posterior area and underwent maxillary sinus graft surgery to increase the height of their maxilla. In all, 27 fixtures were placed in the augmented bone area. On average, 8.6 months later, implants were loaded using provisional or final restorations. The observation period ranged from 27 to 75 months (average, 43.3 months), and the patients did not show any severe resorption of the graft material or any infection during this time. Conclusions: Our results show that the new DBBM is useful for a maxillary sinus graft procedure. Good healing responses as well as reliable results were obtained for an average follow-up period of 43.3 months.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권5호
• /
• pp.482-487
• /
• 2006

As the uses of dental implants are prevailing, the need for sinus bone graft is increasing. Deproteinized bovine bone mineral (DBBM) was not mentioned in 1996 Sinus Bone Graft because of the deficit of the available data. Since then, many clinical and laboratory reports support the use of DBBM in the sinus bone graft procedure. In this report, the histological and clinical successes of sinus bone grafting with DBBM is discussed with available literatures. After sinus bone grafts with DBBM, the proportion of new bone formed was similar or superior to natural maxillary posterior alveolar bone after healing period of 6 months to 1 year. It seems that the grafted DBBM is not be either resorbed nor replaced with bone, but this may not disturb the osseointegration of dental implants installed into it. The clinical survival rates of dental implants installed on the sinus grafted with DBBM was similar to those installed on the ungrafted posterior maxillary alveolar ridge or grafted with autogenous bone. So, it can be concluded that DBBM can be used successfully in the sinus bone graft.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제33권3호
• /
• pp.256-263
• /
• 2011

Purpose: The purpose of this study was to evaluate the effectiveness of autogenous tooth graft materials after maxillary sinus bone grafts. Methods: The study involved 23 implants in 22 patients who visited the Department of Oral and Maxillofacial Surgery and the Department of Periodontics, Chosun University Dental Hospital, in 2008 and received autogenous tooth graft materials for maxillary sinus bone grafts. Results: For eight patients with maxillary bone graft materials prior to implant placement, the healing period averaged five months. For eleven patients with simultaneous maxillary bone graft and implant placement, eight patients received a second surgery, with an average healing time of six months. Three patients had a longer observation period with only a fixture implanted. Three patients who received only a bone graft required more time to implant placement because of the lack of residual bone and also for personal reasons. Only 5 patients had biopsies performed and complications such as infection and dehiscence healed well. The application of autogenous graft materials to the maxillary bone graft sites did not exert any significant effects on the success rates. When a mixture of graft materials was used, the post-surgical bone resorption rate was reduced. Histological analysis showed that new bone formation and remodeling were initiated during the three-to-six month healing period. Bone formation capacity increased continuously up to six months after the maxillary bone graft. Conclusion: According to this analysis, excellent stability and bone-forming capacity were seen in cases where autogenous materials were used alone or mixed with other materials. Autogenous tooth graft materials may be substituted instead of autogenous bones.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권3호
• /
• pp.117-122
• /
• 2014

Objectives: The purpose of this study was to evaluate the sinus bone graft resorption over 3 years after two-stage implant placement. Materials and Methods: The subjects for this study included 30 patients whose maxillary posterior ridges were too atrophic for implants. Bone-added osteotome sinus floor elevation was used in 15 maxillary sinuses, while the bone graft by lateral approach technique was used in 25 maxillary sinuses. The height from the top of the fixture to the sinus floor was estimated immediately after implant placement and the follow-up period was over 3 years. The surgery was classified with two groups: sinus bone grafting with and without autogenous bone. All implants were placed simultaneously. Results: The mean vertical bone loss was $3.15{\pm}2.95mm$. The survival rate of implants was 94.7%. Conclusion: The amount of bone resorption was not significantly associated with the surgical methods, the type of bone graft materials used, or sinus perforation during surgery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권3호
• /
• pp.254-261
• /
• 2009

저자들은 상악골 구치부에서 잔존 치조골의 흡수 및 상악동의 함기화로 인하여 통상적인 임플란트 시술이 어려운 증례에서 하악골의 하악지에서 자가골을 채취하여 이를 분쇄한 후 이종골과 부피비로 약1:1로 혼합하여 상악동 골이식술을 시행하고 동시에 임플란트를 식립하여 비교적 만족할만한 결과를 얻었기에 이를 문헌고찰과 함께 보고하며, 향후 이러한 증례들과 다른 골이식재를 사용한 증례들에 대하여 보다 장기적인 추적조사와 골이식된 부위의 골조직의 재형성, 식립된 임프란트의 보철적인 기능과 장기적인 예후에 대한 보다 체계적인 연구가 필요하리라 사료된다.