• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.2
• /
• pp.19-27
• /
• 2001

This study was performed to determine the prevalence of hypodontia and hyperdontia of permanent teeth among Korean schoolchildren, and to compare differences in the prevalence between Korea, other country, and other ethnic groups. The sample consisted of 346 girls aged 6.9～0.3 yr and 375 boys aged 6.8～0.4 yr on whom a panoramic radiograph was taken at Yeonchun-Gun community in Korea. The prevalence of congenitally missing teeth (third molars excluded) was 6.7% in boys and somewhat higher, 9.5% in girls, and 8.0% for both sexes combined. On the average, number of missing teeth per affected child was 1.9 teeth. The most commonly congenitally missing teeth were the mandibular second premolar (32.7%), followed by the mandibular incisor (28.7%), the maxillary second premolar (16.7%), and the maxillary lateral incisors (10.2%). The prevalence of supernumerary teeth was 2.1 % in boys, 1.4% in girls, and 1.8% for both sexes combined. The most common supernumerary teeth were the mesiodens (76.9%), followed by the supernumerary premolar (23.1 %). The affected male-female ratio was 1.6: 1.0. The prevalence of congenital missing teeth in this study was similar to in studies of Japanese, Danish, American and German. The frequency of hyperdontia was lower in this study than in studies of Chinese children, Japanese and American.

• The korean journal of orthodontics
• /
• v.53 no.1
• /
• pp.26-34
• /
• 2023

Objective: The purpose of the present study was to compare the root positions in virtual tooth setups using only crowns in a simulated treatment with those achieved in the actual treatment. Methods: Pre- and post-treatment intraoral and corresponding cone beam computed tomography (CBCT) scans were obtained from 15 patients who underwent orthodontic treatment with premolar extraction. A conventional virtual tooth setup was used for the treatment simulation. Pre- and post-treatment three-dimensional digital tooth models were fabricated by integrating the patients' intraoral and CBCT scans. The simulated root positions in the virtual setup were obtained by merging the crown in the virtual setup and root in the pre-treatment tooth model. The root positions of the simulated and actual post-treatment tooth models were compared. Results: Differences in root positions between the simulated and actual models were > 1 mm in all teeth, and statistically significant differences were observed (p < 0.05), except for the maxillary lateral incisors. The differences in the inter-root angulation were > 1° in all teeth, and statistically significant differences were observed in the maxillary and mandibular canines. Conclusions: The virtual tooth setup using only crown data showed errors over the clinical limits. The clinical application of a virtual setup using crowns and roots is necessary for accurate and precise treatment simulation, particularly in extraction treatment.

• The Journal of the Korean dental association
• /
• v.47 no.10
• /
• pp.669-676
• /
• 2009

Purpose : Anterior region is crucial area for esthetic implant restoration. However, the alveolar process undergoes atrophy after removal of teeth and creates unfavorable situation for implant installation. The knowledge of the thickness of alveolar bone is required to estimate and expect the bone resorption after extraction. The aim of this study is to measure facial, palatal and faciopalatal bone thickness on maxillary anterior teeth. Methods : Facial, palatal, and faciopalatal bone thickness were measured on the computed tomography (CT) images from 57 patients, using an image analyzer program (Ondemand$3D^{(R)}$, Cybermed, Seoul, Korea). Results : The thickness of facial bone in incisors, lateral incisors and canines were less than 1 mm. The thickness of facial bone increased from anterior to posterior region and the thickness of palatal bone increased from posterior to anterior region. Conclusion : The measurement can be used for planning implant surgery before extraction. CT has are clinically useful in the evaluation of thickness of alveolar bone.

• The korean journal of orthodontics
• /
• v.39 no.3
• /
• pp.146-158
• /
• 2009

Objective: The purpose of this study was to reveal the position of the incisive foramen in relation to the incisive papilla and cusp tips. Methods: Plaster models and CT images of 25 adult orthodontic patients were used to measure the width of the incisive canal and positions of the anterior and posterior borders of the incisive foramen in relation to the incisive papilla. Results: The palatal surface distance from the interdental papilla between the maxillary central incisors to the posterior border of the incisive foramen along the palatal surface was 1.7 fold of the distance from the interdental papilla between the central incisors to the posterior border of the incisive papilla. The distance between the posterior border of the incisive papilla and posterior border of the incisive foramen along the palatal surface was 6.15 ${\pm}$ 1.75 mm. The anteroposterior position of the posterior border of the incisive foramen was slightly anterior to the lingual cusp tips of the maxillary 1st premolars. The width of the incisive foramen was 4.03 ${\pm}$ 0.64 mm, therefore it is recommended to position the mini-implant more than 3 mm laterally when placing a mini-implant lateral to the incisive foramen, from the center. Conclusions: These results can be used as a reference in presuming the position of the incisive foramen when placing mini-implant in the anterior palate area.

• The korean journal of orthodontics
• /
• v.38 no.2
• /
• pp.95-103
• /
• 2008

Objective: This study was performed to investigate the labio/buccal clinical crown curvatures of Korean permanent teeth and to obtain the curve-ratio data in an attempt to fabricate bracket bases fit for each individual Korean permanent tooth. Methods: Three-dimensional digital models were made from 30 sets of dental casts with normal anatomic structures. According to the FA points, horizontal and vertical reference planes were established and lines were drawn on the tooth surfaces in reference to these planes. The curvature was expressed as the coefficient of a quadratic equation. Lines mesial, distal, gingival and occlusal to the horizontal, vertical reference planes and the FA point were drawn. Results: The curvature measured for each line revealed that there are no significant differences between male and female, except for maxillary canines and maxillary second bicuspids (p > 0.05). There were notable differences in the mesio-distal or gingivo-occlusal curvatures among the mandibular lateral incisors, maxillary canines, maxillary and mandibular first and second bicuspids and first molars (p < 0.05). Conclusions: The labial & buccal crown curvatures of teeth in Korean normal occlusion were measured on the mesial and distal, gingival and occlusal sides respectively in this study. Based on these data, a SWA can be developed to fit the individual features of Korean tooth crowns.

• The korean journal of orthodontics
• /
• v.29 no.4 s.75
• /
• pp.411-424
• /
• 1999

The purpose of this study was to find the difference of stress distribution of initial compressive and tensile stress when anterior section of upper utility arch was activated crown lingual torque of $5^{\circ},\;10^{\circ},\;15^{\circ}$ through three-dimensional finite element analysis. For this study the finite element model of upper central and lateral incisors, 1st. and 2nd. premolars and 1st. molars and each periodontal membrane and upper utility arch were made. From the solutions of ANSYS the followings were obtained. 1. $5^{\circ},\;10^{\circ},\;15^{\circ}$ crown lingual torque produce the almost similar distribution and measurement of initial compressive and tensile stress. 2. Acivated upper utility arch torqued central inciors lingually and lateral incisors labially.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.380-393
• /
• 2004

The Purpose of this study was to investigate the dentoalveolar compensation according to anteroposterior skeletal discrepancy in normal occlusion and to evaluate cephalometric parameters that quantitatively describe dental compensations. The study consisted of 90 subjects (50 males. 40 females) who were selected among specimens of normal occlusion at Seoul National, University Dental Hospital, Dept. of Orthodontics. Lateral cephalograms in centric occlusion were traced and digitized for each subject. According to the anteroposterior skeletal pattern the sample was divided into three groups. Cephalometric data were analyzed for the three groups using the SPSS program. Independent t-test, correlation analysis and regression analysis were carried out. The results were as fellows: Dentoalveolar compensation was found in upper and lower incisor inclination and occlusal plane inclination. As the mandible located anterior to the maxilla, the maxillary incisors incisors more labially. the mandibular incisors more lingually, and the occlusal plane continued to flatten. The dental parameters most correlated with anteroposterior skeletal discrepancy were L1 to SN and L1 to FH. Among the compensatory dentoalveolar changes, lower incisor inclination was strongly related to the anteroposterior jaw relationship and played au imposrtant role in obtaining a normal incisor relationship U1 to PtGn and L1 to APog were constant irrelevant to anteroposterior skeletal discrepancy.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.525-541
• /
• 1995

This study was designed to investigate force systems and tooth movements produced by retraction archwire during retraction of four maxillary incisors after the maxillary canine retraction into the maxillary first premolar extraction space using the computer-aided three-dimensional finite element method. A three-dimensional finite element model, consisting of 2248 elements and 3194 nodes, was constructed. The model consisted of maxillary teeth and surrounding periodontal membranes, .022'$\times$.028'-slot brackets, and 5 types of retraction archwires(.019'$\times$.025' stainless steel archwire) modeled using the beam elements. The contact between the wire and the bracket slot was modeled using the gap elements because of the non-linear elastic behaviors of the contact between them. The forces and moments, End displacements produced by retraction archwire were measured at various conditions to investigate the difference according to types of loops, magnitudes of activation force, gable angle, and anterior lingual root torque. The results were expressed quantitative and visual ways in the three-dimensional method. The following conclusions can be drawn from this study.1. When the tear-drop loop archwire was activated, the mesio-distal and lingual translational movements of the teeth helped to close the extraction space, but unwanted movements of the teeth including intrusions and extrusions, and rotational movements in each direction occurred. 2. Activation of T-loop archwire compared with those of other types of retraction archwires produced the least translational movements of the teeth helped to space closure and also the least unwanted movements of the teeth. 3. Increasing amount of activation in the tear-drop archwire led not only to increase of translational movements of the teeth helped to space closure, but also to increase of unwanted movements of the teeth. 4. Addition of gable bend in the tear-drop archwire helped anterior teeth to translational movements in the mesio-distal direction, but increased unwanted movements of the teeth 5. Addition of anterior lingual root torque in the tear-drop archwire helped central and lateral incisor to improve their facio-lingual inclination, but increased unwanted movements of the teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.147-152
• /
• 2013

Purpose: The aim of this study was to propose the position of maxillary anterior teeth and intercanine width measurements based on the incisive papilla in accordance with the cephalic type and gender of dentate Korean adult with normal teeth alignment. Materials and methods: 42 students with Class I normal occlusion, without crowding or spacing, were selected from the Chonnam National University School of Dentistry. The lateral skull radiographs of the subjects were taken and were classified as different cephalic types, based on their PFH / AFH ratios. 42 casts of their maxilla were prepared and both the distance between the upper central incisors and the middle of the incisor papilla was measured with a vernier caliper (A) and the distance between the maxillary canine cusp tips (B) were measured. Statistical analysis was performed using SPSS version 15 and their significance was investigated. Results: For dolichocephalic group, the mean values for A and B were 8.43 (SD: 0.61) and 36.73 (SD: 2.17), respectively. The mean value for A was 8.51 (SD: 1.27) for the mesocephalic group and 8.76 (SD 1.03) for the brachycephalic group. The mean value for B was 35.91 (SD: 1.86) for the mesocephalic group and 37.34 (SD: 2.23) for the brachycephalic group. For the male group, the mean A value was 8.86 (SD: 1.04) and the mean B value was 37.60 (SD: 0.24). For the female group, the mean A value was 8.41 (SD: 0.93) and the mean B value was 36.18 (SD: 2.01). The difference between male and female group in A values were not statistically significant (P>.05). The B values of the male subjects were greater than those of the female subjects and was statistically significant (P<.05). Conclusion: 42 students with normal dentition and occlusion in korea, the distance from the incisive papilla and the incisal edge of maxillary central incisors had no difference in cephalic type or gender. However, the distance between the cusp tip of both canines had significant difference in gender where the male showed higher values than the female, while having no difference in cephalic types.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.534-547
• /
• 2006

Ectopic eruption and impaction of canines is a frequently encountered clinical problems. The incidence of impaction ranges between 1-3%. The cause of canine impaction can be the result of localized factors or can be a polygenic multifactorial inheritance and associated with other dental anomalies. The general dentist and pediatric dentist should know how to properly diagnose and manage potential disturbances in the eruption of maxillary canine. Diagnosis of impacted canine at age 8-10 years can significantly reduce serious ramifications, including surgical exposure and orthodontic traction as well as root resorption of the lateral incisors. Extraction of primary canine would be one of the method to prevent the impaction. The surgical procedure should be designed to minimize the destruction of periodontal tissue of impacted canine. Closed eruption technique is thought to be optimal method of surgical exposure compared with other methods. An overview of the incidence, sequela as well as the surgical periodontal, and orthodontic consideration in the management of impacted canine was presented.