• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.6
• /
• pp.806-815
• /
• 1998

Regular radiographic examination has been considered as an essential diagnostic method for the osseointegrated dental implantation. This study investigated the marginal bone loss through the measurement on the periapical radiograph around 46 endosseous dental implants. Marginal bone loss have been observed for 5 years after delivery of prostheses. The results were as follows : 1. According to the experimental periods, average marginal bone loss in total implant was 1.821mm in the first year, 1.833mm in the second, 1.892mm at third, 1.910mm at forth and 1.957mm at fifth after delivery of prostheses(P<0.05). 2. The average bone loss was 1.832mm in the maxillae and 1.819mm in the mandible in three years but there was no significant difference between the upper and lower jaw(P>0.05). 3. The average bone loss was 1.824mm in males and 1.818mm in females in five years but there was no significant difference according to the sex(P>0.05). These results indicate that the most of the alveolar bone loss occur within the first year after delivery of dental prostheses resulting in the exposure of polished neck positions, and the bone level stabilizes at first thread portion of the implant fixtures.

• The korean journal of orthodontics
• /
• v.12 no.2
• /
• pp.95-108
• /
• 1982

The purpose of this study was to analyze the growth and development of tooth germ and dental arch related to the bone growth during the fetal period. From 70 maxillae and 61 mandibles of the fetus aged 5, 6, 7, 8, 9 and 10 months, X-ray films were taken and measured. The results were as follows; 1. There was remarkable bone growth in the anterior and posterior area of palatum osseum, that were the intetior portion of both deciduous canines anteriorly and the intero-posterior portion of both deciduous second molars posteriorly, where there was active bone growth and radiate formation of bony trabeculae was found. 2. The Growth of anterior tooth germ was greater than that of posterior tooth germ, so anterior tooth germs were crowded. Especially in maxilla, the tooth germs of deciduous lateral incisors were located inside of dental arch and the tooth germs of deciduous canines were located outside of dental arch. 3. Crowding amount increased with the fetal age because the growth of tooth germs was greater than that of jaw bone. 4. In the growth of upper dental arch, the increase of width was greater than that of length. 5. There was proportional relationship between the area of Palatal Trapezoid and the fetal age.

• Animal cells and systems
• /
• v.12 no.2
• /
• pp.101-108
• /
• 2008

Recently, Platypus koryoensis has been reported as a major pest of oak trees in Korea which can introduce the pathogenic fungus(Raffaelea sp.) by making galleries into the heartwood of the tree. As the beetle has developed its effective drilling mouthpart enough to make tunnels, we have analyzed the fine structural aspects of the mouthpart using the field emission scanning electron microscopy(FESEM) to reveal its mechano-dynamic characteristics. The mouthparts of this ambrosia beetle which consist of a labrum, a pair of mandibles, a pair of maxillae and the labium exhibit typical morphology of mycophagous coleopteran beetles and have those characteristics of chewing mouthparts that can excavate galleries in the hardwood. Both of maxillary and labial palpi have the functions of direct the food to the mouth and hold it while the mandibles chew the food. The distal ends of these palpi are flattened and have shovel-like setae. Females have larger maxillary palpi and a larger gular region than males in general.

• Imaging Science in Dentistry
• /
• v.50 no.2
• /
• pp.153-159
• /
• 2020

Purpose: This study was conducted evaluate the influence of reconstruction parameters of micro-computed tomography (micro-CT) images on bone mineral density (BMD) analyses. Materials and Methods: The sample consisted of micro-CT images of the maxillae of 5 Wistar rats, acquired using a SkyScan 1174 unit (Bruker, Kontich, Belgium). Each acquisition was reconstructed following the manufacturer's recommendations(standard protocol; SP) for the application of artifact correction tools(beam hardening correction [BHC], 45%; smoothing filter, degree 2; and ring artifact correction [RAC], level 5). Additionally, images were reconstructed with 36 protocols combining different settings of artifact correction tools (P0 to P35). BMD analysis was performed for each reconstructed image. The BMD values obtained for each protocol were compared to those obtained using the SP through repeated-measures analysis of variance with the Dunnett post hoc test(α=0.05). Results: The BMD values obtained from all protocols that used a BHC of 45% did not significantly differ from those obtained using the SP (P>0.05). The other protocols all yielded significantly different BMD values from the SP(P<0.05). The smoothing and RAC tools did not affect BMD values. Conclusion: BMD values measured on micro-CT images were influenced by the BHC level. Higher levels of BHC induced higher values of BMD.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.1
• /
• pp.27-31
• /
• 2010

Purpose of study: The purpose of this study was to provide adequate diagnostic guideline for the maxillary sinuses prior to dental implant treatment for edentulous posterior maxillary areas. For this purpose, our procedure involves the estimation of the remaining alveolar bone height, the examination of the anatomical variation in the maxillary sinuses (e.g. sinus septum), and the evaluation of the incidence of preoperative pathological conditions in the maxillary sinuses. Materials and Methods: We selected 189 patients to undergo computerized tomography (CT) in order to account for the posterior maxillary anatomy found in patients of Korean ethnicity. We evaluated the following using Dentascan software: Remaining alveolar bone height, incidence of sinus septum, and rate of preoperative pathologic conditions in the maxillary sinus. The average amount of remaining alveolar bone height was analyzed using the student's t-test for differences according to anatomical site, and the ANOVA was used for the differences according to age group with the level of significance set at 0.05. Results: Alveolar bone heights of upper first premolar, second premolar, first molar, and second molar was 12.24 mm, 10.37 mm, 7.16 mm, and 7.15 mm, respectively with statistical significance (P < 0.05). Incidence of sinus septum as an anatomic variation was 17 out of 189 cases (9.0%). Incidence of mucosal thickening as a pathologic variation was 82 out of 189 cases (43.4%). Conclusion: In treatment planning of posterior maxillary edentulous area of Koreans, the consideration of augmentation surgery for maxillary sinus is required in maxillary molar area before dental implant installation, and preoperative screening of the asymptomatic maxillary sinuses can be regarded as a reasonable preoperative procedure in the planning of dental implant treatment on the posterior maxillary edentulous area.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.6.1-6.8
• /
• 2016

Background: Intravenous bisphosphonates have been used in metastatic breast cancer patients to reduce pathologic bone fracture and bone pain. However, necrosis of the jaw has been reported in those who received intravenous bisphosphonates. Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is caused by dental extraction, dental implant surgery, and denture wearing; however, it occurs spontaneously. The purpose of this study was to report BRONJ in metastatic breast cancer patients. Methods: Consecutive 25 female patients were referred from the Department of Oncology from 2008 to 2014 for jaw bone discomfort. Staging of breast cancer, history of bisphosphonate infusion, etiology of BRONJ, and treatment results were reviewed. Average age of the patients was 55.4 years old (38-74). Twelve maxillae and 16 mandibles were involved. Conservative treatments such as irrigation, antibiotic medication, analgesics, and oral gargle were applied for all patients for the initial treatment. Patients who had sequestrum underwent debridement and primary closure. Results: The etiologies of BRONJ were dental extraction (19 cases), dental implant (2 cases), and endodontic treatment (1 case). However, three patients did not have any risk factors to cause BRONJ. Three patients died of progression of metastasis during follow-up periods. Surgical debridement was performed in 21 patients with success in 18 patients. Three patients showed recurred bone exposure and infection after operation. Conclusions: Prevention of the BRONJ is critical in metastatic breast cancer patients. Conservative treatment to reduce pain, discomfort, and infection is recommended for the initial therapy. However, if there is a sequestrum, surgical debridement and primary closure is the key to treat the BRONJ.

• Imaging Science in Dentistry
• /
• v.32 no.1
• /
• pp.19-25
• /
• 2002

Purpose: To evaluate the degree of accuracy of DentaScan reformatted images of the maxillary sinus and periapical, periodontal lesions and to clarify the usefulness of the reconstructed 3-dimensional images to the dental clinical aspects. Materials and Methods: 33 sides of maxillae of the hemi-sectioned Korean heads were used in this study. Periapical radiographs, computed tomography and DentaScan reformatted cross-sectional images were taken for the radiographic evaluation of the peiapical and peiodontal lesions of the maxillary teeth and inferior wall of maxillary sinus. Results : Compared the degree of accuracy and findings of dental and periapical pathoses on the intraoral radiographs and DentaScan reformatted images with the cross-sectioned specimens, the DentaScan reformatted cross-sectional images were more accurate and more effective than the intraoral radiography with a viewpoint of the detection of dental and periapical pathoses. Conclusion: Comparing the lesions of specimens with intraoral radiographies and DentaScan reformatted images, the dental and periodontal pathoses and topographical structures were more clearly observed in the DentaScan reformatted images, providing the possibility of more applications of reformatted images to clinical dentistry.

• Imaging Science in Dentistry
• /
• v.47 no.1
• /
• pp.39-44
• /
• 2017

Purpose: Insufficient knowledge of the anatomy of the maxillary sinuses prior to sinus graft surgery may lead to perioperative or postoperative complications. This study sought to characterize the position of the posterior superior alveolar artery (PSAA) within the maxillary sinuses using cone-beam computed tomography (CBCT). Materials and Methods: A total of 300 patients with edentulous posterior maxillae, including 138 females and 162 males with an age range of 33-86 years, who presented to a radiology clinic between 2013 and 2015 were enrolled in this retrospective cross-sectional study. The distance from the inferior border of the PSAA to the alveolar crest according to the residual ridge classification by Lekholm and Zarb, the distance from the PSAA to the nasal septum and zygomatic arch, and the diameter and position of the PSAA were all assessed on patients' CBCT scans. The data were analyzed using the Mann-Whitney test and the t-test. Results: The PSAA was detected on the CBCT scans of 87% of the patients; it was located beneath the sinus membrane in 47% of cases and was intraosseous in 47% of cases. The diameter of the artery was between 1 and 2 mm in most patients (72%). The mean diameter of the artery was $1.29{\pm}0.39mm$, and the mean distances from the PSAA to the zygomatic arch, nasal septum, and alveolar crest were $22.59{\pm}4.89mm$, $26.51{\pm}3.52mm$, and $16.7{\pm}3.96mm$, respectively. Conclusion: The likelihood of detecting the PSAA on CBCT scans is high; its location is intraosseous or beneath the sinus membrane in most patients. Determining the exact location of the PSAA on CBCT scans preoperatively can help prevent it from being damaged during surgery.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.1
• /
• pp.51-55
• /
• 2015

PURPOSE. Bone density at implant placement site is a key factor to obtain the primary stability of the fixture, which, in turn, is a prognostic factor for osseointegration and long-term success of an implant supported rehabilitation. Recently, an implant motor with a bone density measurement probe has been introduced. The aim of the present study was to test the objectiveness of the bone densities registered by the implant motor regardless of the operator performing them. MATERIALS AND METHODS. A total of 3704 bone density measurements, performed by means of the implant motor, were registered by 39 operators at different implant sites during routine activity. Bone density measurements were grouped according to their distribution across the jaws. Specifically, four different areas were distinguished: a pre-antral (between teeth from first right maxillary premolar to first left maxillary premolar) and a sub-antral (more distally) zone in the maxilla, and an interforaminal (between and including teeth from first left mandibular premolar to first right mandibular premolar) and a retroforaminal (more distally) zone in the lower one. A statistical comparison was performed to check the inter-operators variability of the collected data. RESULTS. The device produced consistent and operator-independent bone density values at each tooth position, showing a reliable bone-density measurement. CONCLUSION. The implant motor demonstrated to be a helpful tool to properly plan implant placement and loading irrespective of the operator using it.

• Journal of Periodontal and Implant Science
• /
• v.46 no.4
• /
• pp.234-243
• /
• 2016

Purpose: Immediate loading of dental implants has been proved to be feasible in partially edentulous jaws. The purpose of this retrospective investigation was to assess the feasibility of immediately loading dental implants in fully edentulous jaws. Methods: A total of 24 patients aged between 53 and 89 years received a total of 154 implants in their edentulous maxillae or mandibles. Among the implants, 45 were set in fresh extracted sockets and 109 in consolidated alveolar bones. The implants were provisionally managed with chair-side made provisional resin bridges and exposed to immediate loading. Implants were followed up for 1-8 years, including radiographic imaging. Marginal bone levels were evaluated based on radiographic imaging. Results: A total of 148 out of the 154 implants survived over the follow-up period of 1 to 8 years, giving a survival rate of 96%. The time or region of the implantation, the pre-implant augmentation, and the length and diameter of the implants had no statistically significant influence on the survival or the success rate. The marginal bone level remained stable with only minimal loss of 0.3 mm after 60 months of loading. Conclusions: Within the limitations of this study, immediate loading is feasible for dental implants in edentulous jaws.