• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.144-158
• /
• 2023

R&D (Research and Development) investment by companies and the government continues to increase, and the total R&D expenditure of public and private sectors in 2021 reached KRW 102 trillion, and the ratio of R&D investment to GDP was 4.96%. It ranks second in the world after Israel. This study analyzes the current status of the domestic R&D service industry and the research and development (R&D) innovation ecosystem based on the business activity survey data of the National Statistical Office in terms of improving R&D productivity of domestic R&D investment that has exceeded 100 trillion won, and analyzes the global R&D service industry and analyzes the global research service industry and R&D service Industry support government policy As a result of the analysis, in the domestic R&D ecosystem, the R&D outsourcing demand of service companies is rapidly increasing, compared to the stagnant R&D outsourcing demand of traditional manufacturing companies. In order to respond to these changing demands for technological innovation, this study suggests balanced support for R&D outsourcing for manufacturing and service companies, expansion of domestic R&D outsourcing, establishment of R&D outsourcing strategies specialized for the service industry, establishment of an open R&D ecosystem, and innovation in connection with materials/parts/equipment strategies.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.198-201
• /
• 2009

As a way to improve the safety of automotives and to reduce the weight of vehicles, new forming technologies and advanced materials are in high demand in the automotive industry. However, the advanced strength steel has inferior formability and large springback. In order to overcome such drawbacks, the hot press forming process (HPF) has been being applied for forming of automotive sheet parts. In this work, new equipment was suggested to measure unlimited displacement range compared to previous one which was able to measure only up to 10mm displacement range. The external extensometer connected with grips by wire was applied to equipment so that total strain range was measured up to failure also in high temperature. And the finite element analysis was conducted to characterize the mechanical properties of the HPF steel. Finally, the flow curves were represented by utilizing the Johnson-Cook type equation both in uniform and post-uniform deformation regions.

• The Research Journal of the Costume Culture
• /
• v.8 no.6
• /
• pp.899-914
• /
• 2000

The purpose of the study was to provide the actual data for designing adaptive dresses for the disabled elderly. In order to get the data, we had 3 parts of the procedure as follows ; 1. The survey of 205 nursing-care providers who take care of the disabled elderly in 1999. 2. Measuring 10 measurements of 80 disabled men and women each, 160 samples. 3. On the basis of data above, developing the adaptive dresses and doing the wearing-tests of those. The results are as follows ; 1. The most popular style for the disabled elderly in nursing facilities was non-collar pajama's. Specially, pajama style was needed for the disabled elderly being sick in bed, one-piece style was required for the disabled eldery with dementia. And the most desirable fabric function was a physiological comfortability. The most proper price required was about 20,000 won. 2. As Korean apparel industry use K.S. sizing system, we decided to use the same measurement to categorize the samples, bust and height. And according to the frequency in the size chart, we suggested the production size for the disabled eldery men and women. 3. After developing these adaptive dresses, the results of wearing-tests showed two kinds of problems. One was that of the sleeve length ; Actually, for the disabled elderly, the longer than the production size is the better for them. The other problem was revealed from subsidiay materials, fasteners.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1376-1380
• /
• 2005

In recent automotive industry, vehicle weight can be reduced by one-step forming of tailored blanks welded with two or more sheets of metal blanks. Tailored blank(TB) welding is a production method for blanks involving welding together materials of different quality, thickness, and coating, and has proved popular in fabrication automotive parts. This paper deals with the forming characteristics of mash seam welded tailored blanks. Using these forming characteristics, the bumper beam was developed using the mash seam welded tailored blank with the different thickness. We performed the forming simulation with respect to strain distribution on blank during the stamping of the bumper rail part. Based on these results, we made some stamping tryouts with selected types of blank designs to investigate the formability of tailored blank with different thickness. During the tryouts, we knew that it was important the BHF(Blank Holding Force). We obtained to reducing 10.5% weight and cost with adapting the bumper beam of automotive component using the tailored blank of mash seam welding.

• Transactions of Materials Processing
• /
• v.22 no.1
• /
• pp.17-22
• /
• 2013

Tube hydroforming is a technology that utilizes hydraulic pressure to form a tube into desired shapes inside die cavities. Due to its advantages, such as weight reduction, increased strength, improved quality, and reduced tooling cost, single-layered tube hydroforming is widely used in industry. However in some special applications, it is necessary to produce multi-layered tubular components which have corrosion resistance, thermal resistance, conductivity, and abrasion resistance. In this study, a hollow forming process to fabricate a part from multi-layered tubes for structural purposes is proposed. To accomplish a successful hydroforming process, an analytical model that predicts optimal load path for various parameters such as tube material properties, thickness of tubes, diameter of holes and the number of holes was developed. Tubular hydroforming experiments to fabricate a hollow part were performed and the optimal loading path developed by the analytical model was successfully verified. The results show that the proposed hydroforming process can effectively produce hollow parts with multi-layered tube without defects such as wrinkling or fracture.

• Journal of Korean Public Health Nursing
• /
• v.9 no.2
• /
• pp.43-51
• /
• 1995

Many poeple has been engaged in industry is aware of the dangers from exposure to high intensity nose levels. The exposure to high intensity noise is encountered in a large number of situations. Laws governing the safety and health of employed people being to create a suitable working environment and eliminate unsafety practices and processes. Work areas should be designed and laid out so that they are satisfactory both from the environmental and safety points of view. In this connection safety also implies that noise is kept at a level which is not likety to cause hearing damage. This study was performed to measure the noise of press and assembly process in an automobile factory. and suggested the method of noise control. Consequently the effect ways of reducing level in working environment are as follows; 1. Changes to machines which would reduce noise generation. 2. Alteration of equipment to avoid impact in machinery and handing materials. 3. Enclosure of noisy machines or machine parts. 4. Mounting of attenuators on gas and air outlets as well as ventilation ducts. 5. Erection of sound absorbing screens. linings. and baffles in work areas. 6. The personal ear protectors can be chosen to protect the workers.

• International Journal of Costume and Fashion
• /
• v.15 no.2
• /
• pp.37-47
• /
• 2015

The purpose of this study was to examine the differences in terminologies used in South and North Korea, to describe objects or activities related to clothing and textiles, as a part of a bigger project that aims at developing an educational program in provision of reunification of the Koreas. In this study, a total of 176 North Korean terms that differ from South Korean terms were collected from various sources, including dictionaries that are developed to compare South-North Korean languages as well as texts such as magazines and news articles, about North Korean daily life. The terms were classified into sub-categories: materials for clothing, clothing management, construction and design, garment names, body parts, description of physical appearance or state of hygiene, and apparel industry. Many of the North Korean terms were derived from native expressions, rather than adopting foreign terms or terms in Chinese characters. Some North Korean terms did not have any corresponding words in South Korean terms or vice versa. We expect the terminology list to become a useful educational resource in establishing a clothing and textiles curriculum in preparation of reunification, by allowing the students to familiarize with the differences in the usage of terms.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.3
• /
• pp.13-19
• /
• 2005

Metal Bearing's research that use the clad steel had led in advanced country. Metal Bearing that is produced by domestic companies is ship, vehicles, development equipment and plant equipment. This is Cast White Metal Lining Bearing that is Bimetal Bearing standing 2 generation. Cast White Metal Lining Bearing is foreseen to be used widely on industry whole in the future. Cast White Metal Bearing is product that need precision processing. But the technique is generalized widely. So an advanced country is depending on import from a developing country that price is cheaper than itself manufacture. it is judged that high added value creation by deepening of price competition is difficult. Therefore need product development of new form and is changing to Trimetal Bearing parts. Trimetal Bearing is high quality technique that do compression junction to thin plates of special object on the Back Metal. Therefore, this research developed Trimetal bearing's materials.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.1
• /
• pp.36-40
• /
• 2002

The purpose of study was to suggest an investigation of citizen's attitude on harmful insects in house. This study was consisted of four parts, such as basic investigation (housing shape, housing material, the period of house constructed, a cleaning condition), condition of kitchen, condition of living room condition of bathroom. The environmental pollution was increased by the development of industry and urbanization in modern. And also the clean of house has related with air quality such as pollutants and harmful insects etc. Because dwelling shape of urban come to be crowded, shut tightly and high buildings, the air quality of indoor was gradually polluted by several irregular cause. In one of housing pollution, the harmful insects was important any other than indoor air pollution. The problems of kitchen were the odor of food waste, discharge system of sewage and harmful insects. The important issues of living room were mold and construction materials, then important them of bathroom were easing nature and discharge system of sewage. A kind of the harmful insects in house investigated cockroach> mosquito> ant>fly. Finally, it appeared that the control of harmful insects can be applied to the improvement of indoor air pollutant which are difficult to be controlled in house.

• Transactions of Materials Processing
• /
• v.13 no.3
• /
• pp.211-215
• /
• 2004

Recently, one of remarkable tends in the development of optical communication industry is the miniaturization and integration of products. The alignment system of micro optical module is a key apparatus for the miniaturization of optical module and the development of optical communication parts with high functionality. In this research, we have developed a system capable of automatic alignment of a $30\mu\textrm{m}$-thick film filter and a lensed fiber in order to improve the speed and losses in the optical fiber-to-filter alignment of optical modules. Using the developed automatic alignment system and silicon optical bench, we have measured optical loss and characteristics of the assembled optical add/drop module before packaging $1{\times}1$ OADM optical module. Whole size of add/drop module was less than $5mm{\times}5mm{\times}1mm$. The measured maximum insertion loss was 0.294㏈ that is below 0.3㏈ which is a standard loss of optical module.