국가응급대응정보시스템(NERIS)개발의 일부인 수송안전정보부분은 최적수송경로제공시스템과 수송사고 조기 경보시스템으로 구분된다. 본 연구는 조기경보시스템을 구축하기 위한 것으로 유해화학물질을 수송하는 차량에 대하여 수송시 차량의 위치 및 위험출의 상태를 실시간으로 모니터링 함으로써 수송시 발생할 수 있는 유고에 따른 피해(화재, 폭발, 가스 유출 등)를 사전에 방지하거니- 조기 감지하는 것을 목적으로 한다. 본 인구는 CPS와 CDMA, GIS 기술을 통해 위험물 차량의 통행이 허용되어 있는 노선을 택하고 있는지 모니터링 할 뿐만 아니라 위험물 차량의 사고발생시점과 위치를 신속히 파악하여 긴급 대응할 수 있는 시스템을 개발하고 수행능력을 평가하여 실제 저용 가능성을 확인하고자 수행되었다 평가결과, 각 실험구간에서의 통신 정확도는 고속도로 구간 99$\%$, 일반국도 구간 96$\%$, 고지대 구간 97$\%$, 일반지대 구간 99$\%$, 지방부 구간 96$\%$, 도심부 구간 99$\%$, 터널구간 98$\%$로 나타나 개발된 시스템은 현실에 적용해도 문제가 없을 만큼 릎은 통신성공률을 기록하였다. 다만, 단점으로 나타난 것은 무건 통신망을 이용하는 PDA를 차량용 단말기로 채택하여 개발함에 따라 전용 안테나가 적은 지방부나 통신 음영지역에서는 차량용 단말기와 운영서버와의 통신에 문제가 나타난다는 한계가 있다 따라서, 향후 본 시스템의 상용화를 위해서는 지방부나 터널 등 통신음영지역에 단점으로 나타난 무선 통신의 한계를 극복 할 수 있도록 CDMA, DSRC, 무선데이터 등 다양한 통신기술의 복합적 활용 방안과 위험물 운송차량의 모니터링 목적에 맞는 전용 단말기 개발이 필요할 것이다. 또한, 현재 특별한 유해물질 관리체계 및 규약이 존재하지 않은 우리나라에서는 본 시스템을 통해 위험물 수송을 위한 지침으로의 활용방안에 관한 연구가 필요하다. 아울러, 개발된 시스템을 이용하여 위험뭍 차량관리 이외에도 특정 폐기물의 무단 방치 및 폐기 등의 불법적인 행위에 대한 자동단속이 가능하도록 서비스 분야의 전략적 확대 등 정책적 측면에서의 연구도 병행되어야 할 것으로 판단된다.
서울시내에 위치한 위탁급식을 실시하는 중학교에서 제공하는 음식 중 잡채의 생산공정별 각 단계에서 HACCP을 적용하여 시간, 온도, 미생물 분석을 통하여 위해 요소를 분석하고 통제하는 방법을 모색하였다. 잡채의 음식의 생산단계에서 음식의 위해 요인의 발생은 온도, 소요시간, 미생물 증식, 용기의 위생 등 복합적 요인에 기인하는 것으로 나타났고 거의 모든 원재료, 전처리 및 저장단계, 배식단계가 CCP로 설정되었다. 잡체 원재료의 미생물학적 품질은 검수단계에서 총균수($10^2$∼$10^{5}$ ), 대장균군수(0∼$10^3$)으로 검출되었으나 세척이나 살균과정을 거치면서 총균수는 거의 검출되지 않았으며 대장균군은 검출되지 아니하였다. 잡채 제조후 시간이 경과하면서 3시간만에 총균수가 5.1${\times}$$10^2$/g으로 증가되었다. 원재료의 철저한 검수, 전처리 과정시 교차오염의 방지와 생야채의 소독이 필수적이었고 조리과정시 세균사멸에 필요한 열장 온도를 지키며 저장과정과 조리후 급식까지 방치되는 시간을 최대한 줄여 미생물의 증식을 억제할 필요가 있었다. 또한, 급식되는 음식의 안전을 위해서는 최상의 원료구입과 음식생산단계에서의 시간단축, 적절한 온도에서의 보관, 위생적 기구사용을 통해 미생물의 증식방지 및 위생관리, 그리고 조리 종사원의 위생상태에 대한 습관화에 노력해야 함을 알 수 있었다.
전라북도내 병원, 학교, 사업체 등의 집단급식소 98개소를 대상으로 작업 단계별 식품의 일반위생 관리항목의 실행 실태와 영양사의 중요성 인식도를 조사하였다. 식품의 구매 및 검수 단계의 위생관리 항목에 대해서는 59.2-98.0%의 실행율을 나타내어 다른 단계에 비해 상대적으로 잘 실행이 되고 있었다. 전처리 단계에서 '바닥에서 식품 취급 안하기'라는 항목은 병원의 경우 실행율이 53.8%로 나타나 사업체(32.5%)와 학교(34.2%)보다 상대적으로 높았으며, 사업체와 학교 급식소에서의 전처리 작업 방법의 개선이 요구된다. 조리 단계에서는 위생관리 항목 실행율이 모두 30% 이하로 나타나 전반적인 개선이 필요하였으며, 저장 단계에서는 학교와 사업체의 작업 과정 개선이 필요하였다. 배식 단계에서는 전반적으로 위생관리 항목에 대한 실행율이 낮아 개선이 필요하였다. 위생관리 항목에 대한 영양사의 인식도 조사 결과 각 단계별로 전반적인 위생관리 실행에 대한 교육 및 인식의 변화가 필요한 것으로 나타났다.
We investigated the effects of feeding rate on the growth performance, blood components, and histology of growing olive flounder Paralichthys olivaceus. Optimum feeding rate (initial fish mean weight : $316.7{\pm}6.18g$) was determined under the optimum water temperature. Two replicated groups of fish were fed a commercial diet at rates of 0%, 0.4%, 0.6%, and 0.8% of body weight (BW) per day, and to satiation. Feeding trial was conducted using a flow-through system with 10 1.2-metric ton aquaria receiving filtered seawater at $21-24^{\circ}C$ for 3 weeks. Weight gain (WG) and specific growth rate (SGR) were significantly higher in fish fed to satiation (1.0% BW/day) than in those in other treatments. These parameters were negative and significantly lower in the starved fish than in fish fed the experimental diet at all feeding rates. There were no significant differences in WG and SGR among fish fed at 0.4%, 0.6%, and 0.8% BW/day. Hematocrit and hemoglobin in fish fed to satiation were significantly lower than those in other treatments. Histological changes of fish fed at 0.6% BW/day indicated that this group was in the best condition; differences were not found in tissues of fish fed at 0%, 0.6% and 1.0% BW/day. Broken-line regression analysis of weight gain showed that the optimum feeding rate of olive flounder weighing 317 g was 0.99% BW per day at the optimum water temperature.
Injectable RGD-bioconjugated Mussel Adhesive Proteins (RGD-MAPs) composite hydroxypropyl methylcellulose (HPMC) hydrogels provide local periodontal tissue for bone filling in periodontal surgery. Previously we developed a novel type of injectable self-supported hydrogel (2 mg/ml of RGD-MAPs/HPMC) based porcine nano hydroxyapatite (MPH) for dental graft, which could good handling property, biodegradation or biocompatibility with the hydrogel disassembly and provided efficient cell adhesion activity and no inflammatory responses. Herein, the aim of this work was to evaluate bone formation following implantation of MPH and collagen membrane in rabbit calvarial defects. Eight male New Zealand rabbits were used and four circular calvarial defects were created on each animal. Defects were filled with different graft materials: 1) collagen membrane, 2) collagen membrane with MPH, 3) collagen membrane with bovine bone hydroxyapatite (BBH), and 4) control. The animals were sacrificed after 2 and 8 weeks of healing periods for histologic analysis. Both sites receiving MPH and BBH showed statistically increased augmented volume and new bone formation (p < 0.05). However, there was no statistical difference in new bone formation between the MPH, BBH and collagen membrane group at all healing periods. Within the limits of this study, collagen membrane with MPH was an effective material for bone formation and space maintaining in rabbit calvarial defects.
This research was performed to provide basic data for the development of infection related dental hygiene studies by surveying the current condition of recognition among students in the department of dental hygiene toward hospital infection management while receiving the following results by using a personal self-administered survey method targeting 303 students in the department of dental hygiene from certain areas. 1. With the current condition of recognition on the sanitization and sterilization of instruments among students in the department of dental hygiene(study), the rate at which surgical instruments are to be sterilized with autoclaves was 79.9% which was relatively higher than other instruments while it was shown that prosthetic instruments for treatment was 56.4%, conservative instruments for treatment was 51.8%, and ultrasonic scaler tip was 51.1% while the way syringe tips(36.1%) and the dental anesthetic apparatus(27.9%) were revealed to require sanitization by alcohol. 2. The 'hand wash' area was the highest with 4.71 while the 'materials and environment management' area and 'equipment management' area appeared high respectively with 4.43 and 4.41. 3. With the current condition of recognition on equipment management, 'equipments used for contagious patients are separately washed after a one-time use and must be sterilized or separated-and-discarded' was the highest with 4.82 while 'sterilization equipments with humidity or water on it are considered contaminated and are not used' showed the lowest recognition level with 3.90. 4. Regarding the current condition of materials and environment management, 'contagious and general trash are separated and discarded' was the highest with 4.70 while 'the refrigerator for medicine storage is cleaned on a regular basis once a month' was revealed as the lowest with 4.11. 5. With the current condition of recognition on hand washing, 'one must wash their hands after coming in contact with contagious patients, was the highest with 4.90 while washing hands after taking off gloves' appeared as the lowest with 4.51 point. To conclude department of dental hygiene there is to infection management and necessary about organization disinfecting and pasteurization to strengthen an education in order raising a stamp helping practical ratio about the infection management which whole, is from presence at a sickbed and connection does and about the infection management which is substantial and educational program development leads feed with the fact that deepening studying which is continuous must become accomplished becomes.
Knowledge is composed through the interaction between the concept structure already held by students and their experience, and learning can be said to be the active process of solving the cognitive conflict caused by this interaction. Therefore, this study consists in showing the effective learning method and finding out the elements which the teacher has to own, through examining several forms of pre-conception or mis-conception of the inertia, the force-equilibrium, the action and reaction, the heat, and the electric current, and then finding out their solution and studying student's change in science concepts. For this study, the types of concept on the five above-mentioned materials which students have were examined through the concept-classifying question paper, and the classes to which the class mode for the change of concepts applied, were practised in each different classroom by each different instructor - a professor, a scientist, a teacher, and two students, respectively. And the effect of the teaching strategy based on these classes, and each different instructor' influence on the change of concept in students. were examined. The result of my study is as follows; 1. Students have various types of pre-conception which are different from science concept, and these types of pre-conception tend to last even after learning in class. 2. The thoughts on the correct science concept of the high school third-grade students who learned the physics in the traditional teaching method, and the second grade students who don't learn the physics yet, were nearly equal those of the second grade students by receiving the physics class through the cognitive conflict course were greatly changed especially that students showed the distinct change on mechanics and electric current. 3. Students didn't show the remarkable change of the science concept on the five materials in the four kinds of experimental classes by each different instructor but in the part of mechanics, there was the distinct change between the class by professor and those by the students. This was due to the difference of the authority and the attitude of the concept demonstrator. 1) The authority, the kind attitude, and the responsibility of the expert played an important role in the correct concept-formation of mechanics part - especially in the case of the mis-conception caused by the intuitive belief. 2) In the class by instructor with the democratic teaching method, the change of concept took place more easily, because in his class students could discuss the subject freely, so that they might experience the thought course to give them the confidence on the science concept.
The objective of this research was to experimentally test the effect of rice straw mats on the reduction of runoff, sediment and discharge under a laboratory scale with different rainfall intensity and slopes. We used the small runoff plots of $1m{\times}1m{\times}0.65m$ ($L{\times}W{\times}H$) in size were filled with loamy sand. Experimental treatments were bare (control), rice straw mats + PAM(SP), rice straw mats + PAM + sawdust(SPS) and rice straw mats + PAM + rice husks(SPR); slope of 10% or 20%; and rainfall intensity of 30 or 60 mm/hr. Runoff volume and coefficient from covered plots were significantly lower than those from control plots. Under the 30 mm/hr and 10% simulations, average runoff coefficient of covered plots decreased more than 92%. Under 60 mm/hr and 20% simulations, the ratios were between 39.8~58.1%. Under the condition of 30 mm/hr rainfall and 10% slope, sediment discharge from covered plots was practically zero. And at 20% plots, sediment reduction ratio was more than 95%. Under the condition of 60 mm/hr rainfall, sediment reduction ratio of 10 and 20% plots ranged between 86.3~95.3% and between 79.8~86.5%, respectively. The differences in initial runoff time, runoff and sediment discharge among different cover materials were not significant. Rainfall intensity showed higher impact on initial runoff time, runoff, and sediment discharge than slope. It was also shown that even if runoff reduction by surface cover were low, sediment discharge reduction could be very significant and contribute to improve the water quality of streams in sloping agricultural regions. It was concluded that the use of straw mat and PAM on sloping agricultural fields could reduce soil erosion and muddy runoff significantly and help improve the water quality and aquatic ecosystem in receiving waters.
현재 주얼리 산업에서 신제품 개발은 대부분 3D 캐드와 3D 프린팅을 활용하고 있다. 이러한 상황에 전문대, 내일 배움 카드(국비), 과정평가형 자격 교육의 주얼리 3D CAD/3D 프린팅 관련 교과는 국가직무능력표준(NCS) 3D CAD 모델링과 3D 프린팅 능력단위에서 제시하는 훈련장비, 훈련시간, 훈련시설, 실습재료 기준에 기반하여 실시하고 있다. 본 연구는 국가직무능력표준(NCS)에서 제시한 귀금속 가공과 보석디자인 세 분류의 3D CAD 모델링과 3D프린팅 관련 능력단위 훈련기준이나 수행내용을 분석하여 이에 기반한 3D CAD/3D 프린팅 교육과정과 제반환경 등 교육과정 시스템 개발을 연구하였다. 이러한 3D CAD/3D 프린팅 교육과정과 시스템을 활용한 교육은 주얼리 산업뿐만 아니라 4차 산업의 한 축으로 불리는 3D CAD/3D 프린팅 제조 산업 분야 전반에 지속적으로 실무 능력을 갖춘 전문 인재를 공급할 수 있게 할 것이며 관련 교육을 받는 교육생들의 취업의 질적 향상과 취업 후 장기근속율 또한 높이는 긍정적 교육 효과를 가져올 수 있을 것이다. 또한 이러한 실적은 최근 신입생 모집이 어려운 주얼리 관련 학과나 3D프린터를 활용하는 제조 관련 일부 학과의 신입생 모집률 향상에도 도움이 될 수 있을 것이다.
본 연구 목적은 예방접종에 대한 교육홍보 기본 컨셉 도출, 매체 집행전략 개발, 매체시안 개발을 위해 광고전략 조사를 실시하여, 2000년대에 국가예방접종사업의 홍보고안을 위한 효과적인 전략을 제시코자 실시하게 되었다. 연구대상과 방법으로 우리나라 보건소 242개 중 169개 보건소에 종사하는 예방접종 담당자(242명)와 자녀의 예방접종을 위해 보건소에 내소한 보호자(1,193명)를 대상으로 구조화된 우편 설문조사를 실시하여 예방접종에 대한 주관적 중요도, 예방접종 사업에 대한 홍보 경험 및 수단, 예방접종에 대한 지식과 인식, 예방접종 홍보광고 전략개발을 위한 방안을 도출하기 위해 빈도 분석, t-검정, 일원분산분석을 각각 실시하였다. 조사결과로 예방접종 담당자는 예방접종에 대한 중요성을 인식하고 있는 것으로 나타났다. 예방접종 사업의 홍보 매체 경험율에 대해서는 예방접종 담당자는 91.3%, 보호자는 70.6%가 경험이 있다고 응답하였고, 일반대중이나 광고 전문인 모두 자주 접할 수 있는 TV, 지역신문, 팜프렛 등의 홍보광고 수단을 경험한 것으로 조사되었다. 예방접종에 대한 지식과 인식에 대한 조사에서는 예방접종 담당자가 예방접종에 대한 전문적인 지식을 갖고 있는 것으로 나타났고, 보호자는 예방접종에 대한 필요성과 중요성을 높게 인식하고 있는 것으로 조사되었다. 예방접종 홍보매체의 선호도에서는 예방접종 담당자가 팜프렛 76.0%, 포스터 44.6% 순으로 나타났고 보호자는 TV 70.5%, 지역신문 39.2% 순으로 선호하는 것으로 나타났다. 광고 포스터 색상 선호도 조사에서는 예방접종 담당자가 초록 32.0%, 노랑 19.9% 순이었고, 보호자 역시 초록 29.5% 노랑 22.0% 순으로 나타났다. 광고 스타일 선호도 조사에서는 예방접종 담당자는 유명인사나 연예인이 예방접종으로 인해 일상생활이 활기차고 건강하다는 생활 장면을 보여주는 스타일로 구성해야 함을 알 수 있었다. 캠페인용 슬로건의 선호도 조상에서는 예방접종 담당자와 보호자 모두 긍정적 메시지를 선호하였다. 연구를 통해 예방접종 사업의 중단기 홍보전략에 대한 실행방안 구체화와 비교평가를 통한 가장 효율적인 홍보 방안을 제시하기 위한 연구사업이 필요하며 이를 위해 현실적 대중 요구를 반영한 홍보매체 개발, 홍보전략에 근거한 홍보매체 개발, 매체에 대한 평가연구, 연구방법 및 평가가 요구된다. 또한 교육홍보매체에 활용될 표준매체 제작 및 집행지침의 개발이 필요하다고 할 수 있다. 무엇보다도 이러한 사업의 추진을 위해서는 정부 또는 국가 공공기관의 예산 투자, 인력 투입과 활용 등을 통해 국가 예방 접종 사업이 활성화되길 기대한다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.