• 한국주거학회논문집
• /
• 제21권1호
• /
• pp.23-30
• /
• 2010

The purpose of this study is to analyze the elevations of standard rural house designs after the 1990's. Various types of analysis were carried out on a total of 18 different sizes and 50 types of designs with p'yong sizes ranging from 12 to 44. The objects of analysis are the various elevations & the roof types that were supplied in the standard rural house design according to each year 1995 (8 sizes 20 types), 1997 (8 sizes 8 types), 1998 (l size 8 types), 2000 (2 sizes 4 types), 2001 (2 sizes 4 types), and 2004 (3 sizes 6 types). Results from the analysis demonstrate that (1) The gable roof has been used as the roofing type for standard rural house design since 1990. However the roof types of the standard rural house design includes only a few different types of gable roofs and roof materials(most roof types use asphalt shingle). (2) While most front elevations have been altered from asymmetrical to symmetrical most rear elevations have evolved from symmetrical to asymmetrical proportions since the 1990's (3) While siding materials and red-brick were most commonly used the main outer-wall materials prior to 2000, environmentally-friendly materials have been used as outer-wall materials since 2000. (4) In terms of the analysis of outer-wall objects before 2000 the walls were even, yet after 2000 these outer-walls evolved to become concave-convex walls. In other words, the evolution of the outer-wall has included a variety of wall types.

• KIEAE Journal
• /
• 제13권6호
• /
• pp.121-128
• /
• 2013

This study attempted to explore the MC design methods of modular construction using discontinuous double module grids and further, the design methods of walls. Modular construction is generally characterized with multiple units called modules with a module dimension of 3M(300mm) appearing in the form of double grids. The discontinuous double grids including correction values and gap values occurs inevitably in the modular construction where units are joined horizontally. Therefore, it is desirable to carry out the MC design taking into account these discontinuous double grids. In this study, the MC design was applied to the plane of wooden houses in modular construction, going through a process of setting the size of pillars and inside dimensions, of determining the dimension of discontinuous double grids that occur during the assembly of units, and of setting the dimension of outer walls in conjunction with the derived dimensions. The dimension of outer walls was applied differently depending on the range of regional use by analyzing the energy performance with the materials used. Consequently, the materials and components of factory-produced buildings can be used directly without processing, and the suitability of the outer wall design can be pre-determined by previewing the calculation of the cross-sectional configuration and heat transmission coefficients of outer walls in modular construction, allowing to be used as a decision-making tool of design.

• 한국소음진동공학회논문집
• /
• 제24권7호
• /
• pp.562-568
• /
• 2014

This study aimed to identify changes in the physical properties of artificial mineral-fiber materials used as building insulation that had been installed in the outer walls of buildings for a long time. To achieve this goal, glass fiber and rock wool were collected from outer walls in actual buildings and their acoustic and thermal performances were measured. These were compared with measurements from similar products manufactured recently. The results showed that old, used samples had a lower sound absorption coefficient compared to recently manufactured materials. The old samples also displayed increased compressibility compared to new materials. For example, the compressibility difference for glass wool was 7.32 mm. Old samples had a dynamic stiffness $1.28MN/m^3$ higher than new material samples. The thermal conductivity of both old and new samples increased within creasing temperature. They showed similar results at temperatures between 0 and $20^{\circ}C$.

• 한국화재소방학회논문지
• /
• 제31권2호
• /
• pp.1-8
• /
• 2017

샌드위치패널은 건축물의 내 외벽 및 지붕구조에 사용되며 양면의 불연성재료와 단열용 심재로 구성된 복합자재이다. 뛰어난 단열성능과 경량 및 시공의 우수한 특성 대비 화재 시 패널간 결합부위를 통해 화염이 내부로 유입되어 심재가 쉽게 용융되며 급격한 화염확산으로 인명 및 재산피해를 발생시킨다. 현행 건축법은 건축물 마감재료에 대하여 소규모 시험편에 대한 화재시험방법으로 연소성능을 파악하며 규정한 성능기준에 합격한 제품을 사용하도록 한다. 외벽 마감재료의 경우 불연 준불연 성능확보 재료를 사용하거나 화재확산방지구조를 설치하도록 규정한다. 본 연구는 외벽 마감재료에 국한되어 적용하고 있는 화재확산방지 구조를 샌드위치패널 건축물에 적용하여 수평 수직 화재확산의 위험성의 차이를 확인하고자 하였다. 이에 샌드위치패널에 대하여 ISO 13784-1 시험방법을 통한 실물화재실험과 금속구조물을 이용하여 패널간 화염확산을 차단하는 시공을 통해 화염확산방지 적용 여부에 대한 연소거동과 그 효과를 측정하였다. 실험 결과 패널 조인트 부위의 화염확산방지구조 시공은 패널 내부의 화염확산을 지연하며 이에 따른 플래시오버 시간이 지연되어 복합자재 건축물의 화재안전확보에 중요한 요인으로 작용될 수 있음을 확인하였다.

• Animal cells and systems
• /
• 제3권2호
• /
• pp.215-219
• /
• 1999

Monoclonal antibody for delta-9-tetrahydrocannabiol (THC Ab), conjugated with protein A-gold, was employed as a probe to detect THC localization in the gland and subjacent cells of chemically fixed bracts of Cannabis. THC was detected in the outer wall of the disc cells, fibrillar matrix, the surface feature of secretory vesicles, and sheath throughout development of the secretory cavity. The probe was absent from vesicles. Label was also present in anticlinal walls of disc cells and walls of dermal and mesophyll cells. Little or no THC Ab was present in disc cells and none were detected in control tissues. This distribution pattern of THC Ab was similar to that in tissues prepared by high pressure cryofixation-cryosubstitution. Consistent association of THC with wall and wall-derived materials suggests that cannnabinoids are synthesized outside the plasma membrane and bound to a wall component, where-upon they are transported to the cavity with wall materials released from the disc cell wall during development of the secretory cavity.

• 인간식물환경학회지
• /
• 제23권1호
• /
• pp.101-114
• /
• 2020

This study focused on the composition of the exterior space of Parkjinsagoga, the types of gardens and planting and the landscape characteristics of walls, and examined its meaning as modern garden remains. Parkjinsagoga is a modern Korean house that harmonizes traditionality and practicality, and is an invaluable material for research not only on architecture but also on changes in the gardens of upper-class gardens. Its exterior space can be divided largely into An-chae (inner house), Outer Sarang-chae (outer house) and Inner Sarang-chae areas, and a garden was created in each yard (inner garden). In particular, one thing noticeable is that the yard of Inner Sarang-chae, unlike traditional gardening styles, was actively decorated. At the center of the yard of Inner Sarang-chae, two atypical planters and artificial moundings were created and the traffic line of the garden was designed to enjoy them while walking. An atypical pond was created on one of the artificial moundings and trees and shrubs were densely planted. Natural stones were also placed. The style seemed to be affected by Japanese gardens. These characteristics observed in the gardens of Parkjinsagoga are closely related to the transitional characteristics that traditional gardens started to show in modern times. A total of 35 families and 57 species were planted in the gardens of Parkjinsagoga and there were 19 species of tall trees, 20 species of shrubs and 17 species of flowering plants. The number of species planted in the garden of Inner Sarang-chae was the highest, and a total of 22 species of tall trees and shrubs. The walls in Parkjinsagoga were basically earth and rock-fill walls but their materials and patterns differed depending on the type of spaces. Four types of walls were found to be introduced to the house.

• Plant Resources
• /
• 제5권2호
• /
• pp.95-103
• /
• 2002

Microscopic techniques were used to observe the microstructure of rice husk. Microscopic examination showed that two main components of husk, lemma and palea consisted of outer epidermis, layers of fibers, vascular bundles, parenchyma cells, and inner epidermis, in sequence from the outer to the inner surface. The outer epidermal walls were extremely thick, highly convoluted and lignified. The underlying fibers were also thick-walled and lignified. Parenchyma cells were thin-walled and unlignified. Inner epidermal cells were also unlignified. The outer surface of both lemma and palea were conspicuously ridged, but the lower surface had a flat appearance. As part of a detailed study to characterize rice husk using microscopic and micro-analytical techniques, distribution of silica was also examined, and is presented elsewhere. Rice husk can potentially be used as a raw material for making composite products and the observations presented here form valuable background information for our future work related to product development.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.54-55
• /
• 2020

Recently, "The rules on the standards of evacuation and fire protection of buildings" require that non-burnable materials such as non-combustible and semi-non-combustible materials be used as the materials applied to the building's exterior walls, but styrofoam, which is a combustible material, has been applied a lot and became a social issue. In this study, we developed a non-combustible outer wall molding to secure construction and economic feasibility and free expression using CLC(CLC: Cellular Light-weight Concrete).

• 한국항공우주학회지
• /
• 제46권2호
• /
• pp.114-123
• /
• 2018

풍력타워는 수직형 풍력터빈의 성능을 향상하기 위하여 사용되어진다. 하지만 풍력타워의 성능은 내부반경, 외부반경, 안내벽의 개수 등의 설계변수에 의하여 좌우된다. 따라서 본 연구에서는 풍력타워의 효율적인 설계변수를 찾기 위하여 실험적인 연구를 수행하였다. 실험에 사용된 풍동의 시험부는 높이 2 m, 폭 2.2 m이며, 7개의 안내벽을 가진 풍력타워의 한 층을 모델로 제작하고, 그 내부에 풍력터빈을 설치하였다. 다양한 설계변수에 대하여 실험을 하기 위하여 세 가지 종류의 안내벽을 사용하였다. 상대적인 성능평가를 위하여 동일한 입구속도에서 풍력타워를 원주방향으로 회전이동하여 출력계수를 측정하였다. 실험의 결과에서 풍력타워의 내부반경과 풍력터빈의 회전반경과의 간격이 풍력터빈의 성능을 향상하는데 가장 큰 영향을 미치는 변수임을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1213-1218
• /
• 2004

Film growth rate of InP and GaAs using TMI, TMG, TBA and TBP is numerically predicted and compared to the experimental results. Obtained results show that the film growth rate is very sensitive to the thermal condition in the reactor. To obtain exact thermal boundary conditions at the reactor walls, we analyzed the gas flow and heat transfer in the reactor including outer tube as well as the inner reactor parts using a full three-dimensional model. The results indicate that the exact thermal boundary conditions are important to get precise film growth rate prediction.