• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.390-390
• /
• 2013

Use of recycled aggregates in portland cement concrete construction can offer benefits associated with both economy and sustainability. Testing performed to date indicates that RBMA can be used as a 100% replacement for conventional coarse aggregate in concrete that exhibits acceptable mechanical properties for use in structural and pavement elements, including satisfactory performance in some durability tests. RBMAC is currently not used in any type of construction in the United States. However, use of RBMAC could become a viable construction strategy as sustainable building practices become the norm. Rating systems such as LEED offer points for reuse of building materials (particularly on-site) and use of recycled materials. If renovations at an existing facility call for the demolition of existing brick masonry constructions, the rubble could be included as RBMA in new concrete pavement, sidewalks, or curb and gutter. Other potential uses for RBMAC could include those in the precast concrete industry, particularly in architectural precast concrete applications. In addition to providing acceptable strength and economy, the color of RBMA could be an attractive component of architectural precast concrete panels or other façade components. This paper explores the feasibility of use of RBMAC in several types of sustainable construction initiatives, based upon the findings of previous work with RBMAC produced from construction and demolition waste from a case study site. Guidance for obtaining and using RBMA is presented, along with a summary of material properties of RBMAC that will be useful to construction professionals.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.491-496
• /
• 2023

As the demand for p-type semiconductors increases, much effort is being put into developing new p-type materials. This demand has led to the development of novel new p-type semiconductors that go beyond existing p-type semiconductors. Copper iodide (CuI) has recently received much attention due to its wide band gap, excellent optical and electrical properties, and low temperature synthesis. However, there are limits to its use as a semiconductor material for thin film transistor devices due to the uncontrolled generation of copper vacancies and excessive hole doping. In this work, p-type CuI semiconductors were fabricated using the chemical vapor deposition (CVD) process for thin-film transistor (TFT) applications. The vacuum process has advantages over conventional solution processes, including conformal coating, large area uniformity, easy thickness control and so on. CuI thin films were fabricated at various deposition temperatures from 150 to 250 ℃ The surface roughness root mean square (RMS) value, which is related to carrier transport, decreases with increasing deposition temperature. Hall effect measurements showed that all fabricated CuI films had p-type behavior and that the Hall mobility decreased with increasing deposition temperature. The CuI TFTs showed no clear on/off because of the high concentration of carriers. By adopting a Zn capping layer, carrier concentrations decreased, leading to clear on and off behavior. Finally, stability tests of the PBS and NBS showed a threshold voltage shift within ±1 V.

• Journal of Advanced Navigation Technology
• /
• v.27 no.5
• /
• pp.621-628
• /
• 2023

This study derived a reverse engineering procedure for verifying the design identity of original parts and developed parts for PMA(Parts Manufacturer Approval) and STC(Supplemental Type Certificate) of metal brake pads for transport aircraft, which are critical parts among aircraft parts and equipment. In Korea, the regulations for reverse engineering procedures are regulated by the Parts Manufacturer Approval Guidelines, and in the United States, AC No. 21. 303-4. In the reverse engineering for the brake pad, the detailed procedures for each component were determined by selecting verification test items to confirm identity based on sample quantity, dimensional tolerance, mechanical property measurement, material, weight and volume characteristics for each component. In addition, as a result of analyzing the regulation of Korea and United States, in the case of Korea, it is necessary to establish technical standards for braking systems for transport aircraft and regulations related to flight tests.

• Journal of radiological science and technology
• /
• v.46 no.6
• /
• pp.543-551
• /
• 2023

In this study, the aim was to assess the shielding performance of different 3D printing materials, specifically those produced using FDM, SLA, and CJP methods, with a focus on their application as shielding devices in clinical settings. Additionally, the weight of lead shielding materials can evoke reluctance in pediatric patients undergoing X-ray imaging. A total of 12 materials were printed using their respective 3D printers. These materials were then subjected to X-ray testing using diagnostic X-ray equipment and an exposure meter. The goal was to evaluate their shielding capabilities in comparison to 1 mm lead. The results of this evaluation revealed that VisiJet PXL-Pastel, produced using the CJP method, exhibited the highest shielding performance. Therefore, VisiJet PXL-Pastel by CJP method was selected for the creation of a shielding device designed for pediatric reproductive organs. Subsequent tests demonstrated that both the newly created shielding device and conventional lead shielding equipment achieved the same maximum shielding rate at 50 kVp. Specifically, the shielding rate for the 3D printed device was measured at 84.53%, while the conventional lead shielding equipment, categorized as Apron1 (85.74%), Apron2 (99.98%), and Apron3 (99.04%), demonstrated similar performance. In conclusion, the CJP-produced VisiJet PXL-Pastel material showcased excellent radiation shielding capabilities, allowing for anatomical observations of the target organs and their surrounding structures in X-ray images. Furthermore, its lower weight in comparison to traditional lead shielding materials makes it a clinically practical and useful choice, particularly for pediatric applications.

• Journal of Ginseng Research
• /
• v.47 no.6
• /
• pp.735-742
• /
• 2023

Background: Gintonin is a new material of ginseng that acts through the ginseng-derived lysophosphatidic acid (LPA) receptor ligand. The gintonin-enriched fraction (GEF) inhibits amyloid plaque accumulation in the cortex and hippocampus, improves cognitive dysfunction by increasing acetylcholine levels, and promoted hippocampal neurogenesis in an animal model of Alzheimer's disease. We evaluated the effect of the GEF on the cognitive performance of subjects with subjective memory impairment (SMI). Methods: In this eight-week, randomized, assessor- and participant-blinded, placebo-controlled study, participants with SMI were assigned to three groups receiving placebo, GEF 300 mg/day or GEF 600 mg/day. The Korean versions of the Alzheimer's Disease Assessment Scale (K-ADAS), Mini-Mental State Examination (K-MMSE), and Stroop color-word test (K-SCWT) were also evaluated along with the safety profiles. Results: One hundred thirty-six participants completed the study. After eight weeks, we analyzed intergroup differences in primary or secondary outcome score changes. When we compared the GEF group with the placebo group, we observed significant improvements in the K-ADAS and K-SCWT scores. The GEF group did not show a significant improvement in K-MMSE and BDI scores compared to the placebo group. No adverse events were observed in the gintonin and placebo groups for eight weeks. Conclusion: The GEF is safe and effective in improving subjective cognitive impairment related to both the K-ADAS and K-SCWT in this study. However, further large-scale and randomized controlled studies are warranted to secure other cognitive function tests besides the K-ADAS and K-SCWT, and to confirm the findings of the current study.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.5
• /
• pp.1065-1071
• /
• 2023

This study compared antioxidant activity through DPPH radical scavenging activity of broccoli extract, low temperature (5℃ or less), and high temperature (50℃ or higher) storage conditions. As a result of the experiment, high DPPH radical scavenging activity of 95.5% was confirmed at 1% concentration of broccoli extract, and antioxidant power was maintained at a high level even under storage conditions due to temperature changes. Even cream containing 5% broccoli extract has been confirmed to maintain safety and stability in both preparation stability, discoloration and odor change, pH, and primary adhesion tests. Through these studies, it has been confirmed that broccoli extract is a safe and effective cosmetic material for the skin through high antioxidant activity and antioxidant power maintenance due to temperature changes.

• Tribology and Lubricants
• /
• v.39 no.6
• /
• pp.235-243
• /
• 2023

This paper presents the fabrication process of water-lubricated plastic bearings. Plastic bearings require good mechanical properties and tribological properties as well as elasticity and shock resistance, especially when lubricated in dirty water conditions. In this study, sleeve-type plastic bearings are produced by winding a prepreg sheet, which primary contains nitrile rubber (NBR)-modified epoxy, self-lubricating fillers, and various types of lattice-structured reinforcing fibers such as carbon, Aramid, and polyethylene terephthalate. A thermosetting epoxy is chemically modified with NBR to impart elasticity and low-friction characteristics in water conditions. Experimental investigations are conducted to examine the mechanical and tribological characteristics of the developed bearing materials, and the results are compared with the characteristics of a commercial plastic bearing (Thordon SXL), well known as a water-lubricated bearing. A Thordon bearing (mainly composed of polyurethane) exhibits an extremely low load-bearing capacity and is thus only suitable for medium loading (1~10MPa). The tribological characteristics of the test materials are evaluated through Falex block-on-ring (LFW-1) friction and wear tests. The results indicate that friction exhibited by the carbon-fiber-reinforced NBR-10wt.%-modified epoxy composite material, incorporated with the addition of 20wt.% UHMWPE and 6wt.% paraffin wax, is lower than that of the Thorden bearings, whereas its wear resistance surpass that of Thorden ones. Because of these features, the load carrying capacity of the fabricated composite (>10MPa) is higher than that of the Thorden bearings. These results confirm the applicability of water-lubricated plastic bearing materials developed in this study.

• Tribology and Lubricants
• /
• v.39 no.6
• /
• pp.256-261
• /
• 2023

This study is conducted to evaluate the durability of superhydrophobic surfaces, with a focus on two aspects: contact angle measurement and self-cleaning-performance analysis. Superhydrophobic copper and aluminum surfaces are fabricated using the immersion method and subjected to a rolling wear test, in which a 2 kg weight is placed on a rolling tester, under loaded conditions. To evaluate their durability, the contact angles of the specimens are measured for each cycle. In addition, the surface deformation of the specimens before and after the test is analyzed through SEM imaging and EDS mapping. The degradation of the self-cleaning performance is evaluated before and after the wear test. The results show that superhydrophobic aluminum is approximately 4.5 times more durable than superhydrophobic copper; the copper and aluminum specimens could endure 21,000 and 4,300 cycles of wear, respectively. The results of the self-cleaning test demonstrate that superhydrophobic aluminum is superior to superhydrophobic copper. After the wear test, the self-cleaning rates of the copper and aluminum specimens decrease to 72.7% and 83.4%, respectively. The relatively minor decrease in the self-cleaning rate of the aluminum specimen, despite the large number of wear cycles, confirms that the superhydrophobic aluminum specimen is more durable than its copper counterpart. This study is expected to aid in evaluating the durability of superhydrophobic surfaces in the future owing to the advantage of performing wear tests on superhydrophobic surfaces without damaging the surface coating.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.111-117
• /
• 2024

Reproductive research such as artificial insemination and embryo transfer is necessary to produce high-quality riding horses. In this study, we investigated the effects of estrus synchronization and ovulation induction methods, which can be considered the basis of artificial insemination in horses, on the hormone concentration and artificial insemination pregnancy rate of mares. For the purpose of synchronization of estrus in horses, Cidr-plus insertion method, Regumate feeding method, and 150mg progesterone + 10mg estradiol mixed administration method were used. In the Cidr-plus insertion method and the Regumate feeding method, the progesterone concentration reached the appropriate level for ovulation induction on the 8th day of administration. The mixed administration method of 150mg progesterone + 10mg estradiol maintained the progesterone concentration at an appropriate level immediately after administration. With the administration of PGF2a and hCG, progesterone concentration decreased rapidly, making ovulation induction possible. As a result of comparing the pregnancy rate between natural estrus and estrus synchronization, the pregnancy rate was found to be higher in estrus synchronization and ovulation induction. From the results of this study, it is insufficient to judge the effect of the pregnancy rate due to the small number of tests, but in terms of usability, estrus synchronization and ovulation induction were useful. Therefore, it is expected to contribute to improving the efficiency of future roadster production.

• Steel and Composite Structures
• /
• v.50 no.4
• /
• pp.383-401
• /
• 2024

The research comprehensively studies the axial compression performance of T-shaped concrete-filled thin-walled steel tubular (CTST) long columns after fire exposure. Initially, a series of tests investigate the effects of heating time, load eccentricity, and stiffeners on the column's performance. Furthermore, Finite Element (FE) analysis is employed to establish temperature and mechanical field models for the T-shaped CTST long column with stiffeners after fire exposure, using carefully determined key parameters such as thermal parameters, constitutive relations, and contact models. In addition, a parametric analysis based on the numerical models is conducted to explore the effects of heating time, section diameter, material strength, and steel ratio on the axial compressive bearing capacity, bending bearing capacity under normal temperature, as well as residual bearing capacity after fire exposure. The results reveal that the maximum lateral deformation occurs near the middle of the span, with bending increasing as heating time and eccentricity rise. Despite a decrease in axial compressive load and bending capacity after fire exposure, the columns still exhibit desirable bearing capacity and deformability. Moreover, the obtained FE results align closely with experimental findings, validating the reliability of the developed numerical models. Additionally, this study proposes a simplified design method to calculate these mechanical property parameters, satisfying the ISO-834 standard. The relative errors between the proposed simplified formulas and FE models remain within 10%, indicating their capability to provide a theoretical reference for practical engineering applications.