• 한국안전학회지
• /
• 제14권1호
• /
• pp.150-157
• /
• 1999

Developed in the study is the analysis of human factors involved in accidents of Korean Construction Projects. The 556 cases are sampled from a survey material 'Serious Accident Cases in the Construction Projects' edited by Korea Industrial Safety Corporation in 1995 through 1997. The analysis of these cases shows that existing classification system is not good for practical applications in real spots since they are difficult for engineers to understand. In this paper, human factors are classified into three groups by extracting the analysis and arrangement of the cases. Futhermore, We'll propose here a new type of accident which is subdivided. If engineers use this type of accident, they will be probably able to analyze efficiently human factors which are involved in accidents and relatied with how it happen. In the case of fall and upset accidents, personal factors seem to be critical when workers are horizontally moving in an unstable manner, and vertically moving without boarding facilities. Futhermore work environmental factors are important when workers release some materials and are performing building and dismantling tasks.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.31-34
• /
• 2000

It is very important to understand the correlation of between inter layer dielectric(ILD) CMP process and various facility factors supplied to equipment system. In this paper, the correlation between the various facility factors supplied to CMP equipment system and ILD CMP process were studied. To prevent the partial over-polishing(edge hot-spot) generated in the wafer edge area during polishing, we analyzed various facilities supplied at supply system. With facility shortage of D.I. water(DIW) pressure, we introduced an adding purified $N_2(PN_2)$ gas in polishing head cleaning station for increasing a cleaning effect. DIW pressure and PN2 gas factors were not related with removal rate, but edge hot-spot of patterned wafer had a serious relation. We estimated two factors (DIW pressure and PN2 gas) for the improvement of CMP process. Especially, we obtained a uniform planarity in patterned wafer and prohibited more than 90% wafer edge over-polishing. In this study, we acknowledged that facility factors supplied to equipment system played an important role in ILD-CMP process.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.174-182
• /
• 2013

This study divided the observation area in an indoor space for area setup to analyse the effect of the difference of design types on the characteristics of observation with the observed time of each area as objects. Though it is thought that the difference of design patterns may be influenced by the factors and material composing the space, no existing approaches have had any quantitatively measuring method. Eye-tracking could be efficiently utilized for observation analysis from the viewpoint of dating observation behavior. The followings are the results of analysing the observation characteristics depending on design pattern. First, 5 observing areas were set up according to concentration of observation time in order for the concentration by area to be examined and the factors of design having effect on the difference of observation patterns by design type could be analysed. Second, as a whole, the observation of modern types showed high observation characteristics. When the difference of observation characteristics by pattern was examined by difference at observation frequency, the observation frequency defined to be more than 50% was seen to be almost same from Area I to III and to get higher from Area IV, and that defined to be 30% was high at Areas III and IV. In Area V, it was very high at natural. Third, that of Area II is no more than 8.2% but had the most observation time. As for observation characteristics, the horizontal observation of the central part was the highest and had more observation frequency at modern type that at natural one. These observation characteristics by area enabled to analyse the observation tendency depending on design characters at relevant area. Fourth, the design factors composing natural type were found to bring more attention when the area showed higher concentration at natural type than at modern one. And the analysis of design factors could make it to be confirmed that the quality of material and background factors in addition to design factors in the area had more effect on sight concentration.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1994년도 춘계학술대회강연 및 발표대회 강연및 발표논문 초록집
• /
• pp.6-6
• /
• 1994

Har dmaterials such as cemented carbides with or without coated layer, cermets, ceramics and diamond or c-BN high pressure sintered compact are used for cutting tools, wear -resistant parts, rock drilling bits and/or high pressure vessels. These hardmaterials contain not only hard phase, but also second consituent as the element for forming ductile phase and/or sintering aid, and the mechanical properties of each material depend on (1) the amount of the second constituent as well as (2) the grain size of the hard phase. The hardness of each material mainly depends on these two factors. The fracture strength, however, largely depends on other microstructur a1 factors as well as the above two factors. For all hardmaterials, the fracture strength is consider ably affected by (3) the size of microstructur a1 defect which acts as the fracture source. In cemented carbides, the following factors which are generated mainly due to the addition of the second constituent are also important; (4) the variation of the carbon content in the normal phase region free from V-phase and graphite phase, (5) the precipitation of $Co_3$ during heating at about $800^{\circ}C$,(6) the domain size of binder phase, and (7) the formation of ${\beta}$-free layer or Co-rich layer near the surface of sintered compacts. For cemented carbides coated with thin hard substance, the important factors are as follows; (8) the kind of coated substance, (9) the formation of ${\eta}$-phase layer at the interface between coated layer and substrate, (10) the type of residual stress (tension or compression) in the coated layer which depends on the kind of coating method (CVD or PVD), and (11) the properties of the substrate, and (12) the combination, coherency and periodicity of multi-layers. In the lecture, the details of these factors and their effect on the strength will be explained.

• 한국주거학회논문집
• /
• 제16권4호
• /
• pp.17-28
• /
• 2005

The purpose of this study was to find out the residents' needs fur rural houses and to suggest the policy directions for developing Korean rural viewscape houses. The subjects were 386 houses and residents. They were selected according to accessibility, area characteristics, administrative district, and village types. The data were collected by using the interview and observation method based on the questionnaire. By analyzing the residents' needs for rural houses, the following conclusions were derived: 1) In order to preserve the rural characteristic, the government should lead to establish the yard space and the exterior design factors such as wall material and color, and the shape, material, and color of roof. 2) At the same time, the government should provide the residents with the subsidy for house improvement, so that they can build the desirabe size of house and the aged remodel their houses. 3) The contemporary design model of rural Han-ok should be developed and built. 4) The new rural house model improving roof design should be developed, because present houses with slab roofs and skirt roofs spoil the harmony with the rural natural environment. 5) The direction of rural houses for viewscape was defined as to satisfy residents' needs for convenient housing lift and to harmony visual and physical factors - building form, material and color - involving Korean rural housing culture.

• KIEAE Journal
• /
• 제12권4호
• /
• pp.97-104
• /
• 2012

A phase-change material is a substance with a high heat of fusion which, melting and freezing at a certain temperature, is capable of storing and releasing large amounts of energy. Heat is absorbed or released when the material changes from solid to liquid. Therefore, PCMs are classified as latent heat storage (LHS) units. The purpose of this study is to analyze PCM wallboard design parameters using dynamic energy simulation. Among the factors of PCM, melting temperature, latent heat, phase change range, thermal conductivity are very important element to maximize thermal energy storage. In order to analyze these factors, EnergyPlus which is building energy simulation provided by department of energy from the U.S is used. heat balance algorithm of energy simulation is conduction finite difference and enthalpy-temperature function is used for analyzing latent heat of PCM. The results show that in the case of melting temperature, the thermal energy storage could be improved when the melting temperature is equal to indoor surface temperature. It seems that when the phase change range is wide, PCM can store heat at a wide temperature, but the performance of heat storage is languished.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.149-155
• /
• 2005

The purpose of this study is to investigate the flexural strengthening effects of CF(Carbon Fiber) sheet for the full-scale RC beams with multi-layer CF sheets. The partial strength reduction factors of CF sheets are suggested from the full-scale RC beams tests strengthened with multi-layer CF sheets up to six layers as well as material tests. From the material tensile tests, it was observed that the average tensile strengths of CF sheets per layer are decreased as the number of CF sheets is increased. Also the steep strength reductions of CF sheets in material test results at rupture are observed compared with the structural tests results for the full-scale RC beams strengthened with multi-layer CF sheets. Finally, the partial strength reduction factors far CF sheets up to six layers are suggested considering the effects of multi-layer and unit weight of CF sheets.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1557-1564
• /
• 2000

When the half infinite crack in the orthotropic material strip with a large anisotropic ratio(E11>>E22) propagates with constant velocity, dynamic stress component $\sigma$y occurre d along the $\chi$ axis is derived by using the Fourier transformation and Wiener-Hopf technique, and the dynamic stress intensity factor is derived. The dynamic stress intensity factor depends on a crack velocity, mechanical properties and specimen hight. The normalized dynamic stress intensity factors approach the maximum values when normalized time(=Cs/a) is about 2. They have the constant values when the normalized time is greater than or equal to about 2, and decrease with increasing a/h(h: specimen hight, a: crack length) and the normalized crack propagation velocity( = c/Cs, Cs: shear wave velocity, c: crack propagation velocity).

• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.32-38
• /
• 1994

The methods in wood processing are so limited at present that a scope of its utilization is restricted. This often makes wood itself less valuable as a material comparing with other materials, that is, plastics, metals, and glass. Such differences are due to a lack of plasticity in wood, i.e. it cannot be melted, dissolved, or softened sufficiently for molding. However, once plastic properties are added to wood, it becomes more useful material. This further broadens the method in wood processing to a variety of fields. In this way, wooden material which is limited in use can be modified into a high quality product with additional value. Furthermore, utilization of wastes from wood, for example, would be made viable. In this study, thermoplasticization was carried out by benzylation of wood(sawdust). Various factors those affect the reaction were tested to produce benzylated wood with different degrees of substitution. Reaction temperature and time were the quite important factors. Optimum reaction temperature was 110$^{\circ}C$, and weight percent gains(WPG) of final products increased gradually with the increase of reaction time. The pretreatment (or preswelling) of wood with alkaline solution had a critical effect on benzylation. and the concentration of alkaline solution should be above 30% to obtain high weight percent gain. The thermal flow temperature of the benzylated wood decreased with the increase in weight percent gain, that of 80% weight percent gain is about 200$^{\circ}C$.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.429-433
• /
• 2004

According to researchers, the influential factors of scouring are generally divided into three factors: the flow conditions, the type and position of structures, and the characteristics of bed materials. In addition, scouring is affected by the 3-dimensional turbulent boundaries, the unsteady flow, the movement of sediment in the scour-hole area, the approach flow velocity and depth, the width of bridge foundation/pier, and the particle size of bed materials. However, it is difficult to estimate the scour depth near bridge piers when all conditions are factored in at once. Therefore, for reasonably accurate estimates of scour depth, it is essential to consider sufficiently the flow force and resisting force for scour. That is, to determine the shear stress concerning the bed material distribution is needed. In this study, the experiments were performed under the condition of a steady state of flow. As a result, scouring occurred at velocity ratios of 0.476,$(V/V_c=0.476)$, and the scour depth was increased linearly as the velocity ratio increased. in addition, the average values of shear stress ratio at zero scouring depth in both rectangular and circular piers were approximately 7$(\tau_c/\tau_{approach})$ and in the case for same size bed particle material. The results of this study can be used for the fundamental material for estimating the scour depth of bed materials.